netis N4 Wireless Dual Band Router Installation Guide

: June 3, 2024
: netis

Table of Contents

netis N4 Wireless Dual Band Router
Package Contents
Hardware Connection
Configure the Router via Web Management Page
Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

netis N4 Wireless Dual Band Router

Package Contents

netis-N4-Wireless-Dual-Band-Router-
fig-1

This QIG is for all netis wireless dual band routers, the product model shown in this QIG is N4,as an example.
You can visit our website: www.netis-systems.com to get more supports.
Ethernet Cable is optional for some models.

Hardware Connection

netis-N4-Wireless-Dual-Band-Router-fig-2

Power off your Modem
Connect the WAN port on netis Router to the Modem’s LAN port with an Ethernet cable.
Connect your computer to one of the LAN ports on netis Router with an Ethernet cable.
Power on your Modem
Plug the provided Power Adapter into the PWR jack of netis Router and the other end to a standard electrical socket. Then wait for one minute.

Configure the Router via Web Management Page

Set the IP address of the wired network adapter on your computer as”Automatic” or “DHCP”.

For Windows 10/8/ 7Nista

Go to “Settings” (Win 8)/ “Start” (Win 7/Vista)> “Control Panel”
Left-click on “Network and Internet”> “Network and Sharing Center”> “Change adapter settings” (Win 8/7y “Manage network connections” (Win Vista).
Right-click on “Local Area Connection” and left-click on “Properties”.
Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.
Select “Obtain an IP address automatically” and “Obtain DNS server address automatically” then left-click on “OK”.

For Windows XP/2000

Go to “Start”> “Control Panel”
Left-click on “Network and Internet Connections”> “Network Connections”.
Right-click on “Local Area Connection” and left-click on “Properties”
Double-click on “Internet Protocol (TCP/IP)”.
Select “Obtain an IP address automatically” and “Obtain DNS server address automatically” then left-click on “OK”.

For MAC Os

Click on the “Apple” menu> “System Preferences”
Click on the “Network” icon.
Click on “Ethernet” in the left side box and click on “Advanced” in the lower right corner.
In the top options, select “TCP/IP”
In the pull-down menu next to “Configure IPv4”, select “Using DHCP”
Click “OK” then “Apply”

Open your browser and type http://netis.cc in the address field to visit router’s web management page.

http://netis.cc

Select the language as you need on the top box,default is in English.

In “Quick Setup” page, select your Internet Connection Type. If “DHCP (Cable Modem)” is selected, the router will automatically receive the IP parameters from your ISP (Internet Service Provider). If “Static IP” is selected, please enter the IP Address/Subnet Mask/Default Gateway/DNS Servers given by your ISP If “PPPoE” is selected, please enter the Username and Password given by your ISP
Under Wireless Setup, configure your wireless network name (SSID) and password.
Left-click on “Save” to make your settings take effect.

Tip 1: Default address: http://netis.cc http://192.168.1.254

Username: guest Password : guest@XXXX
2.4G SSID: netis_2.4G_XXXXXX 5G SSID:netis_5G_XXXXXX “XXXX ” “XXXXXX “:Last 4/6 digits of LAN MAC Address)

Tip 2 You can lick on connection types and further settings. button on the top for other Internet

Troubleshooting

Q: How do I restore my netis Router’s configuration to its default settings?
A: With the router powered on, use a pin to press and hold the Default button on the rear panel for 8 to 10 seconds before releasing it. The router will reboot and all configurations are back to factory default. Q: What can I do if my Internet cannot be accessed?

Check to verify the hardware connections are correct. Please refer to the “Hardware Connection” step.
Login to netis Router’s web management page and ensure that you set the correct Internet Connection Type. For cable modem users, please configure “MAC Clone” additionally.

“Network”> “WAN”. On the left-side menu, left-click on And in the middle page, left-click on “Advanced”> “MAC Clone” and then “Save” it. Advanted
Reboot the modem first and then netis Router. Wait for one minute before you check the Internet again.
If Internet access is not available, please connect your computer directly to your modem and try the Internet again. If the Internet is still not working, please contact your ISP for further help.