netis N3R AC1200 Wireless Dual Band Gigabit Router Installation Guide
- June 6, 2024
- netis
Table of Contents
net is Wireless Dual Band Router
Quick Installation Guide
1. Package Contents
∗This QIG is for all netis wireless dual-band routers, the product model shown
in this QIG is N4.as an example.
∗You can visit our website: www.netis-systems.com to get more supports.
∗Ethernet Cable is optional for some models.
2. Hardware Connection
2.1. Power off your Modem.
2.2. Connect the WAN port on the net is Router to the Modem’s LAN port with an
Ethernet cable.
2.3. Connect your computer to one of the LAN ports on the net is Router with
an Ethernet cable.
2.4. Power on your Modem.
2.5. Plug the provided Power Adapter into the PWR jack of the net is Router
and the other end to a standard electrical socket. Then wait for one minute.
3. Configure the Router via Web Management Page
3.1. Set the IP address of the wired network adapter on your computer
as”Automatic” or “DHCP”.
For Windows 1018/ 7Nista
- Go to “Settings” (Win 8)/ “Start” (Win 7Nista)> “Control Panel”.
- Left-dick on “ Network and Internet” > “ Network and Sharing Center” > “Change adapter settings” (Win 817)/ “Manage network connections” (Win Vista).
- Right-click on “ Local Area Connection ” and left-click on “Properties”.
- Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.
- Select “Obtain an IP address automatically” and “Obtain DNS server address automatically” then left-click on “OK”.
For Windows XP/2000
- Go to “Start” > “Control Panel”.
- Left-click on “Network and Internet Connections” > “Network Connections”.
- Right-click on “Local Area Connection” and left-click on “Properties”.
- Double-click on “Internet Protocol (TCP/IP)”.
- Select “Obtain an IP address automatically” and “Obtain DNS server address automatically ” then left-click on “OK”.
For MAC OS
- Click on the “Apple” menu> “System Preferences”.
- Click on the “Network” icon.
- Click on “Ethernet” in the left side box and click on “Advanced” in the lower right corner.
- In the top options, select “TCP/IP”.
- In the pull-down menu next to “Configure IPv4”, select “Using DHCP”.
- Click “OK” then “Apply”.
3.2. Open your browser and type http://netls.cc in the address field to visit the router’s web management page.
http://netis.cc
3. 3. Select the language as you need on the top box, default is in English.
- On the “Quick Setup” page, select your Internet Connection Type. If “DHCP (Cable Modem)” is selected, the router will automatically receive the IP parameters from your ISP (Internet Service Provider). If “Static IP” is selected, please enter the IP Address/Subnet Mask/Default Gateway/DNS Servers given by your ISP. If “PPPoE” is selected, please enter the Username and Password given by your ISP.
- Under Wireless Setup, configure your wireless network name (SSID) and password.
- Left-click on “Save” to make your settings take effect.
Tip 1:
Default address: http://netis.cc
http://192.168.1.254
Username : guest
Password: guest@XXXX
2.4G SSID: netis 2.4G_XXXXXX
5G SSID: netis_5G_XXXXXX
WiFi Password: password
( “XXXX ” “XXXXXX “:Last 4/6 digits of LAN MAC Address)
Tip 2:
You can click on button on the top for other Internet connection types and
further settings.
4.Troubleshooting
Q How do I restore my netis Router’s configuration to its default settings?
A With the router powered on, use a pin to press and hold the Default button
on the rear panel for 8 to 10 seconds before releasing it. The router will
reboot and all configurations are back to factory default. QWhat can I do if
my Internet cannot be accessed?
-
Check to verify the hardware connections are correct. Please refer to the “Hardware Connection” step.
-
Login to netis Router’s web management page and ensure that you set the correct Internet Connection Type. For cable modem users, please configure “MAC Clone” additionally.
On the left-side menu, left-click on > “Network”> “WAN”. And in the middle page, left-click on “Advanced”> “MAC Clone” and then “Save” it. -
Reboot the modem first and then the net is Router. Wait for one minute before you check the Internet again.
-
If Internet access is not available, please connect your computer directly to your modem and try the Internet again. If the Internet is still not working, please contact your ISP for further help.
Technical Support:support@netis-systems.com
NETIS SYSTEMS CO.. LTD. www.nwtis-systems.com
Warning
FCC PART 15.105 INFORMATION:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
PART 1519 COMPLIANCE INFORMATION:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation 15.21 / KOB784748
001 v08 (P4)
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Operations in the 5150-5250 MHz band are for indoor use only.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body
NETIS SYSTEMS CO., LTD.www.notts-systems.COm
699901111)1d
Documents / Resources
|
netis N3R AC1200 Wireless Dual Band Gigabit
Router
[pdf] Installation Guide
N3R, T58N3R, N3R AC1200 Wireless Dual Band Gigabit Router, AC1200 Wireless
Dual Band Gigabit Router, Dual Band Gigabit Router, Gigabit Router, Router
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>