AstroAI ASIS1M0Y Snow Brush User Manual
- June 3, 2024
- AstroAI
Table of Contents
AstroAI ASIS1M0Y Snow Brush User Manual
Thank you for purchasing the Snow Brush from AstroAl. In order to ensure the best performance and safety, please read and follow the instructions before use and keep the instructions for future reference. We hope you enjoy your new snow brushes. For any help and support from our customer service team, please contact us via support@astroai.com. Thank you again.
WARNING
- Read the instructions carefully before using the product.
- Place the product in a dry place and avoid direct sunlight.
- Keep the product away from fire, corrosive liquids and strong acids.
- Do not pull the bristles to prevent them from dropping out.
- Do not put heavy objects on the product to prevent bending and deformation.
- Do not use the product for anything but its purpose.
Issues may occur during transportation. If you encounter the following problems, please contact our support team:
- The connector is damaged and the snow brush and snow scraper cannot be assembled.
- The parts cannot be connected together or are loose.
- The snow brush has broken bristles or the grip is broken.
- The squeegee is broken.
DIMENSIONS
DIAGRAM
- Angle Adjustment Button
- Snow Brush
- Button
- Length Adjustment Button
- Grip
- Button
- Ice Scraper
- Hook Hole
- Multi-limit Length Adjustment Rod
- Squeegee
FEATURES
2-IN-1 SNOW BRUSH AND SQUEEGEE
The snow brush is made with brand new high-strength ABS plastic, PVC filaments and high quality rubber, combined with a sophisticated button. The snow brush can rotate 180 degrees. One product can make it whether it’s snow brushing or wiping. The low-temperature resistant PVC bristles and rubber squeegee will not freeze or harden even at minus 40°C, so they won’t scratch the glass and car paint.
ICE SCRAPER
The ice scraper is made of new high-strength PC plastic. The high width ice scraper and low temperature resistant materials provide easy and practical deicing and snow removal.
GRIP
The grip is made of brand new high-strength ABS plastic and high-strength triangular aluminum alloy. It is also equipped with a soft and elastic EVA sponge, which allows for a more comfortably use. The smooth, multi-position aluminum alloy tie rod increases the maximum working radius (47.2 inches). The length can be switched flexibly according to your needs.
SPLIT DESIGN
When the snow brush and scraper are separated, they can both operate
independently.
The joint blade is made of one-piece high-strength plastic, which can be used
thousands of times. Suitable for cars, electric vehicles, motorcycles and
bicycles, but also for cleaning snow on roofs, windows, and doors:
After finishing just disassemble and store in a storage bag.
ASSEMBLY AND DISASSEMBLY STEPS
ASSEMBLY
-
Align the grip with the snow brush and push in the buckle. Pay attention to the side of the grip with the length adjustment button, which is the direction in which the grip and the snow brush are properly buckled.
-
Align the non-button end of the grip with ice scraper and push in the buckle.
-
Push and hold the length adjustment button with your thumb, while holding the other end to slide it. Release the pressed length adjustment button upon reaching the desired position.
-
Press and hold the angle adjustment button, rotate the snow brush head, and release the button when you reach the desired position.
DISASSEMBLY
-
Depress the snow brush buckle button and pull out the grip with the other hand.
-
Depress the ice scraper buckle button and pull out the grip with the other hand.
TROUBLESHOOTING
The buckle cannot be connected|
- Make sure the buckle is stuck with the grip.
---|---
Ice on the Bristles|
- Make sure the environment of use is dry, cold and liquid-free.
Deformed Bristles|
- Make sure that nothing is pressing heavily on the product.
The grip of the snow brush end cannot be extended|
- Check to see if you have assembled as per the user manual. Assemble the parts in the correct order.
1 YEAR LIMITED WARRANTY FROM ASTROL
Each AstroAl Snow Brush will be free from defects in its material and works.
This warranty does not cover fuses or damage from neglect, misuse,
contamination, alteration, accident, or abnormal conditions of usage or
handling. This warranty covers the original purchaser only and is not
transferable.
AstroAl always wants to provide our customers with excellent products as well
as service. To know more about us, please visit
astroai.com
Web: www.astroai.com
E-mail: support@astroai.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>