TJL Infinity Lock Set Installation Guide
- June 3, 2024
- TJL
Table of Contents
TJL Infinity Lock Set Installation Guide
Product Dimension
Package Included
-
4pcs Handle Fixing Screws
-
4pcs Lock case & Keep screws
-
2pcs Lever Spindles
-
1pc Thumbturn spindle
-
Over-ride Cylinder & screws
-
Cylinder Spacer (used only with European mortise)
-
4 x AA Batteries
-
Keep/Strike & Back Box
-
Mortise Lock case
Installation Guide
Squaring
Drilling/Routing Template
(Please note drawings NOT to scale)
-
American (squared 70mm Backset) lock case and keep (option 1)
-
European (radial 60mm Backset) lock case and keep (option 2)
WARNING – Failure to Install as illustrated will void CE, UL, CertiFire & Warranty
Operating Guide
(Based on using the TLJ Qlite or Qcloud platform)
RFID Contactless
The TLJ Infinity lock set can be operated via RFID (radio frequency identification) Specifically MiFare 13.56Mhz key cards, key fobs, wristbands or even sticker tags.
If the RFID credential is valid when presented to the front panel it will sound a “beep” and activate the motor so the lever can be rotated downwards and in turn retracts the latch. The lock will also display a blue LED. Invalid credentials will show a red LED and blink a number of times, it is important to count the quantity of red blinks as this helps to diagnose the reason why access was rejected.
Smartphone App using BLE
BLE stands for Bluetooth Low Energy, the lock set allows an App (iOS and Android) to operate it. Ensure to be close by to the lock set, and that Bluetooth is enabled on the smartphone. Press the unlock icon on screen within the app, the red and blue LED will blink rapidly as the BLE key is being validated, and then if valid the same blue LED will display and a beep will sound.
FCC Statement
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
TLJ Group Ltd, HQ, 68/78 Leads Road, Hull, East Yorkshire, HU7 0BY, UK
Declaration of Performance can be found at www.TLJlimited.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>