Krugg MODSMCORNER24D LED Mirror System User Guide
- June 3, 2024
- Krugg
Table of Contents
- GROUNDING INSTRUCTIONS
- IMPORTANT – BEFORE YOU BEGIN
- TOOLS USED
- ELECTRICAL WIRE INFORMATION
- CONFIGURATIONS
- INSTALLATION
- FRONT
- | MODEL| A| B| C| D| E| F| ELECTRIC CURRENT| WATTAGES
- USE AND MAINTENANCE
- LIMITED WARRANTY
- COMMERCIAL WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Krugg MODSMCORNER24D LED Mirror System User Guide
DANGER
Risk of personal injury. To avoid possible electrical shock, the electricity must be turned off at the circuit breaker or fuse box before attemting any installation procedure. The mirror must also be properly grounded. To reduce the risk of burns, fire, electric shock or injury to persons. Use this furnishing only for it’s intended use as described in these instructions. Do not use ttachments not recommended by the manufacturer. Never drop or insert any object into any opening. Do not use outdoors.
GROUNDING INSTRUCTIONS
This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
WARNING
- All fitings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for Bathroom Zones 2, 3 and non bathroom/dry areas. See diagram below.
- NOT suitable for above baths or Zone 1 not for installation in Saunas, Steam Rooms or Shower Cubicles.
- DO NOT fix to damp or conductive surfaces. Suitable for indoor use only.
- Site well away from curtains and fabrics.
- Never cover the mirror.
- Switch off after use.
IMPORTANT – BEFORE YOU BEGIN
- Inspect the product immadiately upon receipt for transit damage or missing parts.
- Handle the product with care and protect against knock to all sides and edges of the glass.
- Make sure that you have all the tools you need to complete the job. (SEE BELOW)
- Ensure ther are no hidden pipes or cables in the wall before drilling.
- If drilling holes in ceramic files use a piece of masking tape on the tile to stop the drill bit from slipping.
Aftercare Instructions
- Clean using a soft dry cloth only when turned off.
- Never use cleaning agents or abrasive materials.
- Do not allow moisture to come into contact with lamps.
TOOLS USED
ELECTRICAL WIRE INFORMATION
The Lead Contains 3 Wires:
COPPER WIRE (GREEN) = GROUND WIRE…Connect to GROUND WIRE in your box, or
to the box as a ground.
WHITE (or BROWN) = NEUTRAL WIRE… Connect to the WHITE NEUTRAL WIRE in
your box.
BLACK (or BLUE) = HOT WIRE… Connect to the BLACK HOT WIRE in your box.
The Modular wires will be connected to your 120 Volt electric box. This should be placed in the wall, behind your Modular Mirror. The suggested method for placement is towards the center, however there is flexibility with the lead wire
Please follow below illustrations
Install optional outside switch to control the defogger
Install Optional Dimmer to control the brightness of the mirror
Refer to how to use guide for more information
CONFIGURATIONS
-
Mod 1836 Left LED Mirror
-
Mod 1836 Right LED Mirror
-
Mod 2136 Left LED Mirror
-
Mod 2136 Right LED Mirror
-
Mod 2436 Left LED Mirror
-
Mod 2436 Right LED Mirror
-
Mod 3636 Left LED Mirror
-
Mod 3636 Right LED Mirror
-
Mod 2436 Center LED Mirror
-
Mod 3636 Center LED Mirror
-
Mod 4836 Center LED Mirror
CONFIGURATIONS
INSTALLATION
FRONT
| MODEL| A| B| C| D| E| F| ELECTRIC CURRENT| WATTAGES
---|---|---|---|---|---|---|---|---|---
1| Mod 1836 Left LED Mirror| 18| 36| 8-13/20| 17-7/8| 1-3/8| 3/16| 0.28A| 34W
2| Mod 1836 Right LED Mirror| 18| 36| 8-13/20| 17-7/8| 1-3/8| 3/16| 0.28A| 34W
3| Mod 2136 Left LED Mirror| 21| 36| 9-3/4| 17-7/8| 1-3/8| 3/16| 0.30A| 37W
4| Mod 2136 Right LED Mirror| 21| 36| 9-3/4| 17-7/8| 1-3/8| 3/16| 0.30A| 37W
5| Mod 2436 Left LED Mirror| 24| 36| 9-5/8| 17-7/8| 1-3/8| 3/16| 0.40A| 49W
6| Mod 2436 Right LED Mirror| 24| 36| 9-5/8| 17-7/8| 1-3/8| 3/16| 0.40A| 49W
7| Mod 3636 Left LED Mirror| 36| 36| 17-7/8| 17-7/8| 1-3/8| 3/16| 0.46A| 55.5W
8| Mod 3636 Right LED Mirror| 36| 36| 17-7/8| 17-7/8| 1-3/8| 3/16| 0.46A|
55.5W
9| Mod 2436 Center LED Mirror| 24| 36| 9-5/8| 17-7/8| 1-3/8| 3/16| 0.33A| 40W
10| Mod 3636 Center LED Mirror| 36| 36| 17-7/8| 17-7/8| 1-3/8| 3/16| 0.38A|
46.6W
11| Mod 4836 Center LED Mirror| 48| 36| 12| 17-7/8| 1-3/8| 3/16| 0.48A| 58W
USE AND MAINTENANCE
- The interior is constructed of mirrored glass and aluminum. Use only a damp cloth to clean. Ammonia or vinegar-based cleaners can damage mirrors.
- When cleaning, spray the cloth, not the mirror, or surrounding surfaces. Do not use abrasive cleansers on any part of the light fixture.
LIMITED WARRANTY
Subject to the terms and conditions specified herein, Krugg Reflections USA LLC , (“KRUGG”) hereby extends a limited lifetime warranty (this “Limited Warranty”) to original Purchasers (as defined below) of the Krugg LED Medicine Cabinet (the “Product”) with respect to certain specified components of the Product. Specifically, KRUGG, by this Limited Warranty, warrants that, for the duraons specified herein, Products purchaseddirectly from KRUGG or KRUGG’s authorized retailers will be free of defects in the material and workmanship of the Product’s electrical components, glass, mirrors, and certain mechanical components, which defects would cause the Product to substantially fail to function when subject to normal use.
COMMERCIAL WARRANTY
Subject to the terms and conditions specified herein, Krugg Reflections USA LLC, (“KRUGG”) hereby extends a limited one-year warranty (this “Limited Warranty”) to Commercial Purchasers (as defined below) of the Krugg LED Lighted Mirror (the “Product”) with respect to certain specified structural components of the Product. Specifically, KRUGG, by this Limited Warranty, warrants that, for a one-year period, Products purchased directly from KRUGG or KRUGG’s authorized retailers will be free of defects in the material and workmanship of the Product’s electrical components, glass and mirrors, which defects would cause the Product to substantially fail to function when subject to normal use.
Additional Warranty Information can be found @ http://www.kruggusa.com
For any installation and warranty related issues, contact us at
info@kruggusa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>