LOUISIANA GRILLS LGK22 22 Inch Ceramic Charcoal Grill User Manual

LOUISIANA GRILLS LGK22 22 Inch Ceramic Charcoal Grill

Packing list

1. Cutter carriage
   Control the knife to cut the film sheet

2. Rubber wheels
   Work with steel axis to keep cutting without slip

3. Steel axis
   Work with rubber wheels to fix and protect film sheet

4. Power switch
   Turn on the machine. Press it lightly to turn back the films during standby

5. Switch for blade holder installation
   Press lightly to open the cover

6. Film feeding sensor
   Auto feeding the film after detecting it

7. Film pasting guide
   Please paste the films based on the guide

8. Blade holder installation port
   Open the port to take out or install the blade holder

9. High definition screen
   6-inch touch screen, built in operation system

10. Power connection port
    External 24v power port

11. Handle
    Press it to get the blade

12. Gear
    Adjust the blade tip length

13. Blade handle holder
    To be fixed by the hole in cutting head

14. Cutting Blade
    Cutting film sheet

Notes:
Just the blade:

• Value bigger,tip longer
• A value smaller, tip shorter
• The factory setting is gear 6

Change blade:

• Press handle
• take out the old blade
• put a new one in it

Blade holder installation

Install the blade holder

Power on / off

Connect the cable and adapter. 110-240V AC power for the plug connection. The adapter connects the machine. Press the power button, machine power on. It takes 30s for starting.

Material installation

Put the material on the table flatly and align left based on the feeding guide The material will be fed automatically after the cutter detect it. Tf the film shift, press the switch in 1 second and the film will be returned back automatically)

WIFI Connection

Note: Connecting succeeds, the wifi ID will be shown below, if not, you may need to insert the correct password and connect.

After turning on the utter, click and choose wifi to Connect.

Login account

After connecting to wifi, choose a login and insert the account and choose a version, then insert your password to log in the data page.. Account and password may paste on the bottom of the cutter or you can get them from your supplier

Choose Cutting Data

Choose a cutting data

Cutting finished

The sheet will be dropped out automatically after cutting finished, please take out the finished parts and paste on the phone.

Parameters and precautions

• Don’ t touch the knife tip by finger
  The finger may be hurt by the knife tip

• Don’t seep into the liquid
  This may cause fire or electric shock

• Don’t use non-original power supply
  This may damage the circuit or electric shock

• Don t use in thunderstorm days
  This may damage the machine

• Don’t use the non-standard materials
  Please cut the standard size of the material to reach the perfect result

Product parameters and precautions

• Press power switch for emergency stop during working.
• Forbid moving the carriage by hand after connecting the power to avoid machine damage.
• Knife is a consumable part, please change to a new one if it is dull.
• Press the power switch in 3 seconds continually to turn off the cutter, forbid taking out the power cable directly to turn off the machine because it will damage the mainboard

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator of your body: Use only the supplied antenna.

References

• grills.com
• Louisiana-Grills
• Louisiana-Grills

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>