EFEKTOR PH3605 Phaser Guitar Effect Software User Guide

PH3605 Phaser Guitar Effect Software
User Guide

PH3605 Phaser Guitar Effect Software

Thank you for choosing Kuassa products!
We encourage you to take the time to read this User Manual thoroughly to ensure trouble free and proper operation of the software.
Following the previous Efektor Distortion series, please welcome the newest addition to the Efektor series: Efektor Modulation. We studied and examined more than 20  models of fabled modulation effects from the 1950s to the last decade. From rack gears, desktop units, and effect pedals as well. Modulation effects are widely used by  organ/synth players, guitarists, and studio engineers to add width, depth, and movement to the original sound. In this latest bundle, we collect the prominent ones and packed  them into four devices.

Full name, phase shifter. Typically more subtle than flanger, but sounds like warbles coming from outer space. Often used on Rhodes electric piano, and of course by  uitarists such as Brian May (Queen) and Eddie Van Halen (Van Halen).

• Phase One: Mild phasing effect, great for clean tone. Less dramatic sweep.
• Dual Phase: Warm and thick phasing sound that sounds great with distorted guitar tones. Great for many instruments such as guitar, bass, keyboards, and vocals.
• Multi Phase: More intense effect . Offers more than a standard wobbling effect.

Key Features:

• Three modes of Modulation in every units.
• Bypass switch button.
• BPM sync.
• Mono or stereo mode.
• CV inputs for automation (RE Only)

System Requirements

Windows:
Windows Vista or Later (64 bit)
Core2 Duo, or AMD Phenom ii X4 or better (latest Intel i3, AMD A4, or better is recommended) with 4GB minimum RAM
VST or VST3 compatible host/DAW
Pro Tools 11 or later for AAX format
Propellerhead Reason 7.1 or later for Rack Extension format Macintosh:
Mac OSX 10.7 or later (64 Bit).
Core2 Duo, or better (latest Intel i3 recommended) with 4GB minimum RAM
VST, VST3, or Audio Units compatible host/DAW
Pro Tools 11 or later for AAX format
Propellerhead Reason 7.1 or later for Rack Extension format

Mac OSX 10.7 or later
Note for MacOS X users: you will be asked for your password upon installation.
For Mac installer(.pkg) format, double-click the installer and follow the instructions. The installer automatically point to your Mac’s default VST/VST3/AU/AAX plug-ins  and Standalone path (see below). Alternatively you can customize the installation target to specific folder.
Here are the default folders installation path for each of our supported platforms in Mac OSX:

• Mac Audio Unit (EfektorPH3605.component)| :  /Library/Audio/Plug- Ins/Components/
---|---
• Mac VST (EfektorPH3605.vst)| :  /Library/Audio/Plug-Ins/VST/Kuassa/
• Mac VST3 (EfektorPH3605.vst3)| :  /Library/Audio/Plug-Ins/VST3/
• Mac AAX (EfektorPH3605.aaxplugin)| :  /Library/Application Support/Avid/Audio/Plug-Ins/

Windows Vista or later
For Windows Installer (.exe), double-click the installer and follow the instructions. The installer automatically points to your system’s default plugins path (see below).  Alternatively you can point the installation target to specific folder. Most VST host already have a “Plugins” or “VSTplugins” folder inside its installation directory, or you can  point the host to read any folder you choose.
Here are the default folders installation path for each of our supported platforms:

Windows 64-bit VST (EfektorPH3605.dll)| : C:\Program Files\Steinberg\VstPlugins\Kuassa\
---|---
 Windows 64-bit VST3 (EfektorPH3605.vst3)| : C:\Program Files\Common Files\VST3\
 Windows 64-bit AAX (EfektorPH3605.aaxplugin)| : C:\Program Files\Common Files\Avid\Audio\Plug-Ins\

Mac OSX 10.7 or later
On a Mac, simply delete the plug-in located on the corresponding Plug-ins folder, and delete other folders and file resources located at,
Folders:

• /Library/Application Support/Kuassa/Default Presets/EfektorPH3605/
• /Users/[User Name]/Music/Kuassa/Presets/EfektorPH3605/

Files:

• /Library/Application Support/Kuassa/Misc/EfektorPH3605 EULA.txt
• /Library/Application Support/Kuassa/User Manuals/EfektorPH3605 Manual.pdf
• /Users/[User Name]/Music/Kuassa/Settings/EfektorPH3605.setting

Windows VISTA or Later
Use “Add/Remove programs” or “Programs and Features” from the Windows Control Panel. If Efektor PH3605 does not listed, delete the .dll/.vst3/.aaxplugin file from  your VST plug-in folder. After Uninstallation, manually delete other Efektor PH3605 file resources at, Folder:
• C:\Users\[User Name]\Documents\Kuassa\Presets\EfektorPH3605\
Files:
• C:\Users\[User Name]\Documents\Kuassa\Settings\EfektorPH3605.setting

Authorization

|
---|---
On evaluation mode, you will see this pop-up window when you first start the plugin.| To start the authorization process, click the [File] button on the top-left  of the plug-in’s interface, there, you will find a selection box titled  [import License].
|
Locate the License File [ EfektorPH3605.kuassa] obtained from the confirmation e-mail sent to you after you purchase EFEKTOR Plug- in(s) from our web store or downloaded from member area.
Note that the License File contains your personal information used to authorize the plug-in.| After you locate the License File, a pop-up box confirming that you are  successfully authorize your plug-in will show.
To check if you have completed the authorization process, just simply load the About Box by clicking the Efektor logo on the bottom left corner. If your authorization is successful, either your name or your e-mail address will be shown on the About Box. You will also notice that the generated noise/silence on the Evaluation Version is now gone.

Function

1. [FILE] BUTTON: The Menu button contains several functions; preset saving, license file authorization, and shortcuts to the user manual and Kuassa website.
2. PRESET SELECTOR: Select from available Presets, press left-right buttons or select from drop down menu.
3. SYNC: Enables synchronization of Rate to the host’s tempo in BPM.
4. A-B COMPARE: Compares two different settings of the plug-in.
5. COPY A to B: Copies settings from the “A” state to the “B” state.
6. STEREO: Enables or Disables stereo output.
7. RATE: Controls the frequency, or the speed of the oscillation. On manual mode, the range is from 0.01 Hz to 20 Hz. When “Sync” is enabled, the range will be from 1  to 1/32T.
8. DEPTH: Controls the height, or amplitude of the modulated signal. On minimum settings, the effect will be very subtle, almost inaudible.
9. FEEDBACK: Determines the amount of signal that is sent back into the effect.
10. MIX: Blends the levels of the “dry” (clean) input signal and the “wet” (processed) signal.
11. LEVEL: Controls the overall output level from the plug-ins.
12. TYPE SELECTOR: There are multiple fx models emulated within the device, each comes from different era, with different flavor, and character. Pick one which suited  your desired sound.
13. BYPASS: Turns the effect unit completely On or Bypass.
14. EFEKTOR LOGO: Click to show the About Box.

Preset Management

1. Presets for EFEKTOR Plug-in(s) are located in the following folders*:
   • Mac: Users/[YourName]/Music/Kuassa/Presets/EfektorPH3605
   • Win: ~\Documents\Kuassa\Presets\EfektorPH3605
   All presets inside these folders will be recognized by the plugin as individual presets, you can also create a folder to group the preset(s). They will thus be shown on the EFEKTOR Plug-in’s preset selector.

2. To save a preset, set your plugin to the desired parameter settings, then select:
   • “Save Preset”: Overwrites currently active preset.
   • “Save Preset As”: Saves current settings into a new preset file (*.kphp for PH3605).

3. When you create a new preset using “Save Preset As…”, make sure that you have chosen the correct preset folder as aforementioned on point 1 above to make sure that it will be recognized automatically by EFEKTOR plug-ins.

4. To add new additional preset banks, create a new folder by clicking “New Folder” button and rename it. Sub-folders are also recognized to manage presets into groups, useful to manage additional preset bank, or grouping presets based by their use.

1. BYPASS
   Turns on, off or bypass the rack extension.

2. TYPE SELECTOR
   There are multiple fx models emulated within the device, each comes from different era, with different flavor, and character. Pick one which suited your desired sound.

3. SYNC & STEREO
   SYNC: Enables synchronization of Rate to the host’s tempo in BPM.
   STEREO: Enables or Disables stereo output.

4. RATE KNOB
   Controls the frequency, or the speed of the oscillation.
   On manual mode, the range is from 0.01 Hz to 20 Hz.
   When “Sync” is enabled, the range will be from 1 to 1/32T.

5. DEPTH Knob
   Controls the height, or amplitude of the modulated signal. On minimum settings, the effect will be very subtle, almost inaudible.

6. FEEDBACK Knob
   Determines the amount of signal that is sent back into the effect.

7. MIX Knob
   Blends the levels of the “dry” (clean) input signal and the “wet” (processed) signal.

8. LEVEL Knob
   Controls the overall output level from the plug-ins.

9. ADDITIONAL BYPASS Switch
   Turns the effect unit completely On or Bypass.

1. CV INPUTS
   CV Input Socket:
   Receives incoming CV message for controlling each of EFEKTOR’s CV control enabled parameters from another device’s CV output.
   CV Input Trim:
   Turn counter-clockwise for each corresponding input to trim or reduce the intensity of incoming CV message.

2. Audio input and output sockets :
   Please note that EFEKTOR is an FX, and should always be added as FX device instead of instrument.

MIDI CC PARAMETER LIST (Propellerhead reason)

**** CC
PSRAMETER NAME

Kuassa Efektor Series Created by:
Muhammad Abduh
Intan Zariska Daniyanti
Iman Firman Amarullah
Juan Prahamma Hartjamt
Dimitar Nalbantov
Arie Ardiansyah
Raden Pratama Kusuma
Adhitya Sulistia Wibisana
Bramantyo Ibrahim
Cil Satriawan
Grahadea Kusuf
Iqbal Ansyori
Rathomi Trinugraha
Bayu Ardianto
Sundawan Sukmaya
Presets and Audio Demos by:
Dimitar Nalbantov (http://www.nalbantov.com)

KUASSA TEKNIKA, PT
Jl. Dipati Ukur No. 71A
Bandung 40132
West Java, INDONESIA
https://www.kuassa.com
General inquiry: info@kuassa.com
Technical support : support@kuassa.com

A Product of KUASSA. Bandung, West Java. Indonesia
© 2010-2021 PT Kuassa Teknika
dna assauK Efektor PH3605isenodnI ,akinkeT assauK TP fo skramedart era.
All other commercial symbols, product and company names are trademarks or registered trademarks of their respective holders.
All rights reserved.

References

• The domain name nalbantov.com is for sale | Dan.com
• Best Guitar Amp Simulator, Audio VST Plugins and Rack Extension

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>