X-PLOR Placing X-PLO R Backpack Instructions
- June 3, 2024
- X-PLOR
Table of Contents
Placing X-PLO R Backpack
Instructions
Placing X-PLO R Backpack
|
---|---
Disconnect the cannula and remove the X-PLO₂R from the small carrying bag, if
applicable.| Place backpack on a flat surface with the front pocket and ring
facing up.
|
Pull on ring to open the front pocket, so you can place the X-PLO₂R inside.
(Be sure that the LCD screen is facing up, the cannula connector is located on
the right side, and the intake vent aligns with the mesh panel.)| Insert and
thread the cannula through the opening at the top of the right shoulder strap.
|
Continue threading the cannula down through the backpack, toward the X-PLO₂R.
(Pull the cannula out through the grommet so it can connect to the X-PLO₂R.)|
Connect the cannula to the X-PLO₂R.
|
Place backpack on shoulders and adjust the shoulder straps so the backpack is
comfortable.| Wrap the cannula up and over both ears and insert the nasal
prongs into your nostrils.
(The cannula should fit comfortably around your head.)
|
Roll the cannula tubing to the desired length. Secure the excess tubing inside
the backpack with the Velcro straps, making sure not to kink the tubing.| Zip
up the backpack and you’re ready to go X-PLO₂R.
You can place additional batteries inside the backpack if desired.
XplorOxygen.com