JAP ARISTO Retractable ATTIC Stairs Installation Guide
- June 3, 2024
- JAP
Table of Contents
JAP ARISTO Retractable ATTIC Stairs
Tools Required
- Place the packaged staircase underneath the mounting hole aligned in the same direction as after installation.
- Remove the packaging materials, and leave the staircase lying on the transport pallet (protect the lower cap from getting scratched).
- Do not remove the protective film from the lower cap until the construction opening is completely cleaned.
- The staircase has a maximum load capacity of 150 kg.
- The staircase is intended for access to residential attics.
- Adjustments to the spring position, bracket positions, or lengthening or shortening of the staircase can be done only after consultation with a professional service (such as that of the manufacturer).
- If the installation is being done in a new structure, wet building processes must be mature enough so that moisture does not cause rust damage to the cap.
- The staircase has one-sided control so that the person who enters the attic cannot close the cap behind him.
- When using a vapor barrier, the vapor barrier foil must be connected all the way to the staircase frame. If the installation is wrong, water can condense on the staircase.
- The builder is responsible for the correct installation.
Installation
Intended to used
Unfolding
Closing
References
- Строителни елементи и интериорни решения | JAP
- Stavebné prvky a interiérová riešenie | JAP
- Building elements and interior solutions | JAP
- Stavební prvky a interiérová řešení | JAP
- Bauelemente und Innenraumlösungen | JAP
- Строительные элементы и интерьерные решения | JAP
- Építési elemek és belső megoldások | JAP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>