PDQ Locks 6400 Rail Filler Exit Device Instruction Manual
- June 4, 2024
- PDQ Locks
Table of Contents
PDQ Locks 6400 Rail Filler Exit Device
6300/6400 RAIL FILLER INSTALLATION ALL DEVICES
- INSERT FILLER CAP /RETAINER
- Insert one corner of Filler Cap into extrusion
- Filler cap is curved/spring-loaded and will not insert without pushing down on other side.
- Once both leading corners are engaged, push or tap cap into extrusion.
- START FILLER
- Overlap plastic Filler Cap onto main rail extrusion being careful not to overlap extrusions.
- Put one side of filler down into extrusion.
- Push or tap other side to snap into place so filler will fit and slide into place.
- SLIDE FILLER INTO PLACE
- Slide filler and filler cap into place –proper position is flush with end of main rail.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>