GEBERIT IDO 1116601101 Wide Sink Installation Guide
- June 3, 2024
- GEBERIT
Table of Contents
GEBERIT IDO 1116601101 Wide Sink
Care Instructions
Tools Required
Bolt fastening washbasin
Take the moisture trap into account when drilling the fixing hole.
Note! Screw-fastening basins require a reinforced wall structure.
Principal dimensions of the porcelain products ±2 %
Bracket or bolt fastening washbasin
Take the moisture trap into account when drilling the fixing hole.
Brackets to be ordered separately length 195 mm, screws M10 x 120 mm to be
ordered separately.
Note! Screw-fastening basins require a reinforced structure.
Porselensproduktenes hovedmål tol. +2%
Principal dimensions of the porcelain products +2 %
Take the moisture trap into account when drilling the fixing hole.
Brackets to be ordered separately length 195 mm, screws M10x120 mm to be
ordered separately.
Note! Screw-fastening basins require a reinforced structure.
Porselensproduktenes hovedmål tol. +2 %
Principal dimensions of the porcelain products +2 %
Take the moisture trap into account when drilling the fixing hole.
Brackets to be ordered separately length 240 mm, screws M10x120 mm to be
ordered separately.
Note! Screw-fastening basins require a reinforced structure.
Porselensproduktenes hovedmål tol. +2 %
Principal dimensions of the porcelain products +2 %
Take the moisture trap into account when drillin9 the fixing hole.
Brackets to be ordered separately length 240 mm, screws M10x120 mm to be
ordered separately.
Note! Screw-fastening basins require a reinforced structure.
Porselensproduktenes hovedmål tol. +2 %
Principal dimensions of the porcelain products +2 %
Take the moisture trap into account when drilling the fixing hole.
Brackets to be ordered separately length 240 mm, screws M10x120 mm to be
ordered separately.
Note! Screw-fastening basins require a reinforced structure.
Porselensproduktenes hovedmål tol. +2 %
Principal dimensions of the porcelain products +2 %
Take the moisture trap into account when drilling the fixing hole.
Brackets be ordered separately length 240 mm, screws M10x120 mm to be
ordered separately.
Note! Screw-fastening basins require a reinforced structure.
Porselensproduktenes hovedmål tol. +2%
Principal dimensions of the porcelain products +2 %
Pedestal
The pedestal should be installed together with the washbasin so that the
washbasin rests on the pedestal.
Suitable for washbasins 56 cm and 60 cm, round and square.
Geberit International AG
Schachenstrasse 77, CH-8645 Jona
[email protected]
www.geberit.com