HIRAETHORE SK-01 Electric Heated Socks User Manual

SK-01 Electric Heated Socks
User Manual Ring heating makes your feet warmer

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Packing List:

Heated socks 1 pair| 5000mA batters 1 pair| Double ended Type-C charging cable| Washing bag| Manual

PRODUCT PARAMETERS

• Rated voltage: 5V/2A
• Charging time: 5-6H
• Weight(g): 600g
• Socks material: 22.5% viscose fiber, 52.5% nylon, 10% polyester, 15% spandex.
• Rated power: 5W
• Service times full power: 3-11 H
• Single battery capacity: 5000mAh

WASHING INSTRUCTIONS:

1. The water temperature should not exceed 122°F
2. The battery must be removed when cleaning, and the battery connecting wire must be sorted and put back into the battery bag.(note that the battery cannot be washed with water)
3. Socks can be machine washed after being put into the laundry bag. It is recommended to wash them by hand.
4. Turn the power cord out and dry it naturally. Do not use a high-temperature iron or dry it at high temperature.

BATTERY CONTROL INSTRUCTIONS:

1. Check the battery power level before using, and charge them to the full state.
2. Distinguish between left and right socks and wear them correctly, keep the battery pocket on the outside of the shins.
3. When not using the product, please unplug the battery for storage.
4. Tie the battery to your calf, then put on socks, insert the type-C plug into the battery.
5. The green indicator of the battery is the power indicator, which corresponds to: four indicators: 100% power; Three indicator lights: 75% power; Two indicator lights: 50% power; One indicator light: 25% power. The red indicator light is the gear indication, which corresponds to: four indicator lights: four gears (the highest temperature gear); Three indicator lights: third gear (sub high temperature gear); Two indicator lights: second gear (medium temperature gear); One indicator light: first gear (low temperature gear).
6. Battery button: long button press for 3 seconds to switch the machine on and off. Short press the case to switch gears, and the default fourth gear (high temperature gear) works when starting up. Press the button gently to switch between gears 4 and 1.
7. After the battery is turned on, if the sock type-C plug is not inserted within 30 seconds, the device will automatically shut down. If you want to continue to use it, you need to restart it.

Wearing diagram of bandage battery

1. Please open the elastic band on the bandage battery and fix the battery on the calf to your needs
2. The bandage has elasticity. Please adjust the tightness to avoid discomfort.
3. Do not pull the elastic band too much, which will cause the elastic force to fail.

• The following data are laboratory test data at room temperature of 77° F.

Light Status| Current Mode| Reference Temperature(T)| Reference Endurance(H)
---|---|---|---
| 4| 158±3| 3-3.5
| 3| 149±3| 3.5-4
| 2| 122±3| 4-5
| 1| 104±3| 8-10

APP TEMPERATURE CONTROL INSTRUCTIONS:

1. The battery must be turned on to use the app function. When it is turned off, the phone will not be able to search for the battery. After turning off the battery through the mobile app, you need to turn it on manually from the battery button.
2. Turn on the mobile phone positioning and Bluetooth functions for APP Bluetooth control.
3. If the mobile app is not connected to the battery device after the battery device is powered on, please check whether other permissions of the mobile app are opened.
4. If you have more than two battery devices, it is recommended to turn off all devices and only turn on two battery devices for app connection to avoid confusion.
5. After turn on the battery, open the phone APP , and the phone APP will automatically connect to the battery device without binding and manual connection.

PRECAUTIONS:

1. Batteries should not approach high-temperature, flammable or explosive objects.
2. Do not hit the battery with force, and do not disassemble or reassemble it.
3. If the battery is not used frequently it is recommended to recharge and activate it every 60 days.
4. It is recommended not to set in high temperature for a long time to avoid skin discomfort.
5. Keep the battery in good condition. The battery shall be stored in a dry and cool environment.
6. Prevent low-temperature burns (if the human body is in a low-temperature environment, the body feels dull, and there are differences in physical fitness). Please lower the temperature in time when the body feels slightly burning.

App main interface description

How to download APP?

1. Scan QR code below to download APP
2. Seach “WARM UPING” on phone APP store

|
---|---

http://kejzn.com/release/scan.html

|

http://idownload.warmuping.kejzn.com

|

http://kejzn.com/release/hotsocks.apk

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>