Projectors BT3 Micro Projector User Manual
- June 3, 2024
- Projectors
Table of Contents
Exquisite products, wonderful life
Projector User Manual
Version:220720
Precautions
- Before using the product, please read the instruction manual carefully and keep it in a safe place for emergency use.
- Please use the machine carefully, and do not drop or hit it at high altitude during transportation to avoid damage to the original machine. Please put on the lens protection cover after use to avoid scratches.
- Please use the standard power cord for power supply.
High temperature
-
When the projector ts working, it is forbidden to block the air inlet or outlet to avoid damage caused by the high internal temperature of the machine due to
poor ventilation. -
Do not look directly at the projector lens with your eyes to avoid damaging your eyes due to strong light.
Electric shock prevention
- In order to prevent electric shock, if there is any problem with the product, please do not disassemble it by yourself (there are no customer-serviceable parts in the machine), please contact professional maintenance personnel for assistance.
- To prevent fire and electric shock, do not expose the machine to rain or moisture.
Working environment
- Only applicable to areas with an altitude of 2000 meters and below.
- Suitable for tropical climate conditions, the maximum allow able temperature Is 35°C.
Packing list
Appearance and function
1. Front view
|
---|---
1. Focus
2. Trapezo Correction
3. Power
4. Source
5. Navigation + OK
6. Home| 7. Menu
8. Return
9. vo-
10. Vol+
11. Mute
12.Indicator Light
---|---
2. Back view
1. Earphone output
2. AV input
3. TF port| 4. HDMI input
5. USB Port
6. Power input port
---|---
Device connection instructions
When connecting the equipment, please pay attention to switching the corresponding signal source.
Power on conncetion
Power on step :
- Projector connect to the power supply ;
- Turn on the Porjector power button or button of the remote control.
Installation mode
Click” Setting ”, select” Projection” .
Four Projection mode
Launcher debugging
When the image is blurred, please manually turn to the focus knob until the image is clear.
Basic settings
iOS eras
iOS projectied screen: WiFi Model
1. Click the “iOS cast” .
2. Click the “Wi-Fi” to connect the home/office wifi.
iOS projectied screen: AP Model
1. Open AP mode: This mode is suitable for environments without a wifi network.
Miracast
1. Click the “Miracast” .
BT connected
-
Click” Setting “, select” Bluetooth” .
-
Click “turn on” button, renovate bluetooth device to be showed, and connected it directly.
USB and TF
- Select “Media” on the menu, then select the desired file category.
- Select the file you need and open it.
Supported multimedia file formats
Support
file formats| Image file| JPEG,PNG,BMP
---|---|---
Audio file| MP3,WMA,AAC,WAV
Video file| MP4,MKV,AVI,MEP,V0B,3PG
Product Specification
| Machine Parameter | Dimension | 246x151x75mm |
|---|---|---|
| Net Weight | 1015g | |
| Light Type | LED | |
| Standard Resolution | 1920*1080 | |
| Projection Ratio | 1.5:1 | |
| Color Gamut | NTSC 55% | |
| Luminance Uniformity | >70% | |
| Power | Voltage | AC100-240V |
Projection distance and size
The projection ratio is 1.5:1 and the optional distance is 3.75ft to 18.75ft. If it exceeds this range, the projected picture will be unclear or the brightness will be too low, which will affect the viewing effect.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver 1s connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.