LiHua 433M Remote Control Instruction Manual
- June 3, 2024
- LiHua
Table of Contents
LiHua 433M Remote Control
Pictures of objects
- Product Model: XR-45-433M
- Operating voltage: DC3V (one 2032 button battery)
- Operating current: less than 20mA when transmitting
- Operating frequency: 433.92MHz
- Modulation mode: OOK
- Standby current: less than 1μA
- Size: 55.716.313mm
- Product quality: 30g
- Transmit power: 10dBm
- Instructions for operation:
- Press the ON button, the indicator light is red, send a signal, open the machine, and release to stop sending.
- Press the OFF key, the indicator light is red, send a signal, close the machine, and release to stop sending.
- When the emission indicator light is slightly bright, it indicates that the battery voltage is low, and it is necessary to replace a new battery.
Application production scene
- wireless mouse.
- remote control toys.
- Smart furniture., etc.
Warning
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: this device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause undesired operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>