THRUSTMASTER 4060252 Viper TQS Throttle Quadrant System User Manual

THRUSTMASTER 4060252 Viper TQS Throttle Quadrant System

Specifications :

• Compatible with: PC (Windows 10/11)
• USB connector: Type C
• Number of buttons: 19
• Number of axes: 5

Product Usage Instructions

1.  Box Contents
   Ensure all items listed in the manual are present upon unboxing

2. VIPER TQS Features
   The VIPER TQS includes a handle, cut off stop, afterburner stop, CHAFF/FLARE slap switch, clip for mission map, USB connector (type C), friction adjustment tool location, and throttle friction adjustment access point.

3. Mapping of Buttons and Axes
   Learn how to map the 19 buttons and 5 axes in Mode A or Mode B as pe  your preference.

4. Information about Using VIPER TQS
   Avoid placing fingers in stop areas while using the handle to prevent pinch hazards.

5. Adjusting the Friction
   Use the included tool to adjust throttle friction based on personal preference. Avoid overtightening or completely untightening the adjustment screw to prevent damage to the system.

6. Installation on a Support
   Ensure proper attachment to a solid desk material and follow manufacturer instructions. Download and use the mounting blueprint to prepare drill holes for installation

7. Installing VIPER PANEL
   If purchased separately, install the VIPER PANEL for expanded flight/combat capabilities with programmable buttons and axis via T.A.R.G.E.T software.

8. Installation on PC
   Visit the provided link to download and install the PC driver and customized interface for the Windows Control Panel.

FAQ :

• Q: How do I update the firmware for VIPER TQS?
  A: To update the firmware, visit https://support.thrustmaster.com/product/vipertqs/ select Firmware, and follow the provided instructions for downloading and installation.

• Q: What should I do to avoid damaging the friction system?
  A: Avoid overtightening or completely untightening the adjustment screw when adjusting the friction of VIPER TQS.

For PC (Windows 10/11)

User Manual
Carefully read the instructions provided in this manual before installing the product, before any use of the product and before any maintenance. Be sure to follow the safety instructions. Failure to follow these instructions may result in accidents and/or damage. Keep this manual so that you can refer to the instructions in the future.

Rev up your engines and fly into the danger zone with the iconic throttle quadrant system from the U.S. Air Force’s VIPER — the world’s most widely-used modern fighter aircraft!
Take your cockpit to the next level with the unique ergonomics of a 1:1 scale HOTAS replica featuring a metal handle, plus realistic buttons and detents.
This manual will help you install and use your VIPER TQS under the best conditions. Before taking off, make sure to carefully read all of these instructions and warnings: they will help you get the most enjoyment out of your product.

Updating the firmware

• In order for VIPER TQS to function properly in video games, you must update its firmware.
• To carry out the update, please visit https://support.thrustmaster.com/product/viper-tqs/
• Select Firmware, then follow the instructions — including the downloading and installation procedure.

 Box contents

VIPER TQS features

1. Handle
2. Cut Off stop
3.  Afterburner stop
4. CHAFF/FLARE slap switch
5. Clip for mission map
6.  USB connector (type C)
7. Friction adjustment tool location
8. Throttle friction adjustment access point

Mapping of buttons and axes

VIPER TQS handle: mapping of the 19 buttons and 5 axes in mode A (without virtual buttons)

Mode B: with virtual buttons

Information about using VIPER TQS

Pinch hazard
Never place your fingers in the stop areas when you are using the handle.

  DANGER
Pinch point. Keep hands and fingers clear of the slide* **

Adjusting the friction
You can adjust the friction of your VIPER TQS throttle quadrant to your own personal preference by using the tool included on the side of VIPER TQS. Please note, however, that optimal throttle friction has been set by default at the factory.

• In order to avoid damaging the friction system, be sure not to overtighten the adjustment screw.
• Also, be sure not to completely untighten the adjustment screw: by doing so, you run the risk that the throttle will no longer be able to stay in position.

Installation on a support

• VIPER TQS can be installed on different types of supports. Most cockpits and supports available on the market are already compatible with similar Thrustmaster products (i.e. HOTAS Warthog).
• Please keep in mind that VIPER TQS features a powerful lever effect, and must therefore be firmly attached.
• Attach the base to your support using suitable M6 screws (not included), so as not to damage the handle. A complete VIPER TQS blueprint is available at https://support.thrustmaster.com/product/viper-tqs/
• Before each use, make sure that VIPER TQS is still properly attached to the support, according to the instructions specified by the manufacturer.
• Be sure to take into account the material that your support is made of, and ensure that it is possible to safely attach the product to it. VIPER TQS must be used on a desk made of a solid material (i.e. MDF or wood), without any hollow or glass components.

Mounting blueprint dimensions (in mm)

• You can download the mounting blueprint from https://support.thrustmaster.com/product/viper-tqs/, then print it out and use it on your support in order to prepare the drill holes.

• **Installation using TM Flying Desk  Mount***
  TM Flying Desk Mount is a metal mounting system featuring a clamping screw, improving the ergonomics and piloting position when using your device. This system is designed for use with desks and tables from 0.6–2.0 inches / 15–50 mm thick.

• **Installation using TM Flying Clamp***
  TM Flying Clamp is a height-adjustable support designed by Thrustmaster for its flight simulation accessories. This mounting system features two clamping screws allowing it to be adjusted for use with desks and tables from 0.6–1.8 inches / 15–45 mm thick.

• Please note that the heavy weight of VIPER TQS may result in unwanted movements of the mounting system.

**Installing VIPER PANEL***

• Sold separately. VIPER PANEL is included with VIPER TQS Mission Pack.
• VIPER PANEL is a control panel that lets you expand your flight/combat capabilities with a total of 43 buttons and 1 axis — all of which are programmable via the T.A.R.G.E.T software. VIPER PANEL is a complement to VIPER
• TQS.

Installation on PC

• Please visit
  https://support.thrustmaster.com/product/viper-tqs/.

• Download and install the PC driver and its customized interface for the Windows Control Panel.

• Once the PC driver has been installed, connect the USB connector to one of your PC’s USB ports.

• To access the Control Panel, select Start / All apps

  • Thrustmaster / Control Panel or Control Panel (in Windows 10).
  • The Game Controllers dialog box is displayed. The accessory appears onscreen with the name VIPER TQS and OK status.

• In the Game Controllers dialog box, click Properties to test and view all functions.

• Enable virtual buttons (Enable virtual buttons):
  This function lets you enable or disable the virtual buttons on the handle (buttons 20 and 21). Click Apply (Apply) once you have selected the mode that you want to use.

• The virtual buttons are disabled by default on VIPER TQS.

CUT OFF and AFTERBURNER detents

The VIPER TQS throttle quadrant features a realistic system of CUT OFF and AFTERBURNER detents (the Afterburner module is removable).

CUT OFF
After having positioned the throttle at the IDLE stop, press the “engine cut- off unlocking” trigger 1 to lift up the handle in order to get over the stop 2, then put the handle in the OFF position 3.
To turn the engines back on, carry out this procedure in reverse.

AFTERBURNER
Move the throttle to the stop 1 and lift it up 2 in order to get over the stop and engage the afterburner 3.

Uninstalling the AFTERBURNER stop
The stop of the Afterburner module is positioned at 80% of the value of the axis.
If you need 100% of the throttle’s travel without a stop (for a particular simulator), you can remove the Afterburner module and its stop by unscrewing the module’s two screws using an Allen key (not included).

T.A.R.G.E.T advanced programming software

Please visit
https://support.thrustmaster.com/product/viper-tqs/. In the Software section, download and install the T.A.R.G.E.T advanced programming software.

Main features of T.A.R.G.E.T

• Different possible configurations for the axes.
• Different possible programming levels: Basic, Advanced and Script.
• Use of the Drag and Drop principle.
• Ability to combine the VIPER TQS throttle quadrant with various Thrustmaster joysticks (HOTAS Cougar, HOTAS Warthog, T.16000M, MFD Cougar Pack, all of which are also compatible with T.A.R.G.E.T), allowing them to be recognized as a single USB device.
• Access to advanced profiles created by the Thrustmaster community.

FAQ and technical support
Do you have questions regarding VIPER TQS, or are you experiencing technical problems? If so, visit the Thrustmaster technical support website:
https://support.thrustmaster.com/product/viper-tqs/.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>