Tribesigns HOGA-JW0874 Shoe Cabinet Instructions
- September 28, 2024
- Tribesigns
Table of Contents
Tribesigns HOGA-JW0874 Shoe Cabinet
Product Specifications
- Model: HHOOGGAA-JR-WJYW01802785474
- Product: Shoe cabinet
- Brand: Tribesigns
Product Usage Instructions
Assembly Instructions:
Follow the assembly steps provided by Tribesigns:
- P-01
- P-02
- …
- P-13
Installation of Cams and Pins:
To correctly install the cams and pins:
- Screw the pin into the designated hole.
- Align the arrow on the cam to the hole of the pin it locks.
- Use a screwdriver to tighten the cam head until secure.
- Avoid using an electric screwdriver for assembly.
Important Notes:
Read each step carefully and follow the instructions in sequence to avoid
assembly difficulties.
FAQ
-
What should I do if any parts are missing or damaged?
Contact our customer service at support@tribesigns.com or call 1-424-220-6888 for assistance. Provide photos of the packaging and products for quick resolution. -
Can I use an electric screwdriver for assembly?
It is recommended not to use an electric screwdriver for assembly to prevent damage to the unit. -
How can I request a replacement for a defective product?
Reach out to our customer service team with details of the issue, and we will send you a free replacement promptly.
We’re here to help!
If you have any issues with this product, please contact our customer service
team before returning it.
We want you to be completely satisfied with your purchase! If anything is
missing, damaged, incor-rect, or not what you expected, don’t worry. Please
keep the outer packaging and take photos of both the packaging and products,
and then reach out to us at
support@tribesigns.com or call us at
1-424-220-6888. We’ll take care of
everything and send you a free replacement, so you can enjoy your purchase as
soon as possible without any hassle.
Assembly Instructions
- Carefully read these instructions and keep them for future reference.
- Refer to the parts list for guidance and ensure that you have all the pieces before starting the assembly process, if anything is missing, damaged, incorrect, contact us FIRSTLY BEFORE assembling.
- When assembling, place all parts on a soft, clean, and flat surface, such as a carpet, to prevent any scratches.
- To avoid misalignment of the holes, Please don’t full tighten the screws until you ensure all parts in place.
Follow Tribesign:
TOOLS REQUIRED
PART & HARDWARE LIST
Installation of Cams and Pins
-
Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is opening to the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit.
-
Read each step carefully before starting. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
ASSEMBLY INSTRUCTION
Contact our customer service team
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>