Sveaverken MINI001 Mini Control Instructions
- September 28, 2024
- Sveaverken
Table of Contents
Sveaverken MINI001 Mini Control
Product Usage Instructions
Starting and Pairing
- Long press Mini Control for 1-2 seconds to start the device with the blue indicator flashing.
- Swipe down on the terminal to open settings and select Mini Control for Bluetooth pairing.
Automatic Driving Mode
To switch on and off automatic driving mode, press the Mini Control.
Turning Off
Long press Mini Control for 3 seconds to turn off the Mini Control.
FAQ
Q: How should I dispose of the product?
A: Correctly dispose of this product by recycling responsibly to promote the sustainable reuse of material resources. Contact the retailer where the device was originally purchased for safe recycling or use return and collection systems.
Q: What are the frequency bands offered by Mini Control in EU areas?
A: Mini Control offers Bluetooth V4.0 frequency band with a maximum radio-frequency power of less than 20 dBm in EU areas only.
Method of Application
- Long press Mini Control for 1-2 seconds, and the device will start with the blue indicator flashing.
- Swipe down on the terminal to open settings, and select Mini Control for Bluetooth pairing.
- Press the Mini Control to switch on and off the automatic driving mode.
- Long press Mini Control for 3 seconds to turn off Mini Control.
- This Mini Control offers the following frequency bands in EU areas only and with the following maximum radio-frequency power: Bluetooth V4.0: < 20 dBm
Product Specifications
- Product Name: Mini Control
- Model No: MINI001
- Product size: diameter 36mm, thickness 8.5mm
- Battery Type: CR2025
- Warranty: 1 Year
- Frequency Range: 2402MHz to 2480MHz
- Manufacturer: Sveaverken Intelligent Technology(Shenzhen) Co., Ltd.
- Address of Manufacturer: Room 401-501, Building 13, Nangang Second Industrial Park, No. 1026, Songbai Road, Sunshine Community, Xili Street, Nanshan District, Shenzhen
- Importer Name: xxxx
- Address: xXXX
- Correctly dispose of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU.
- To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources.
- To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Seaverken Intelligent Technology (Shenzhen) Co., Ltd. declares that
the radio equipment type [designation of the type of radio equipment] is in
compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the
following internet address.
FCC Warning
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>