APEXEL DC001 Electronic Eyepiece User Manual

APEXEL DC001 Electronic Eyepiece

Product Specifications

• Dimensions: 78.0 mm x 112.0 mm
• Product Accessories: Electronic Eyepiece, Smartphone Stretch Clip, USB Type-C Charging Cable, EVA Ring, Cleaning Cloth
• Interface: USB Type-C
• Indicator Lights: Blue light steady on – Device powered on, Blue light flashing – Low battery, Yellow light flashing – WIFI waiting to connect, Yellow light steady on – WIFI connected

Product Usage Instructions

• Insert the TF card and press the power button for 3 seconds to turn on the device.
• Download the APVision software by scanning the QR code in the manual with your smartphone.
• Open the APP, click Connect Device, and search for the WIFI hotspot named “Apexel-DC001-xxxxxx” with the default password “12345678”. Double-click the button to toggle WIFI on/off.
• Connect to a Telescope: Attach the eyepiece clip to the telescope’s eyepiece end for shooting.
• Connect to a Microscope: Place the EVA ring over the microscope’s eyepiece end, then attach the eyepiece clip for shooting.
• Once the WIFI connection is successful, access the real-time preview screen on the APP for shooting, recording, viewing, and downloading.

FAQ

• Q: What do the indicator lights on the Electronic Eyepiece signify?
• A: The blue light steady on indicates the device is powered on, the flashing blue light indicates low battery, the flashing yellow light indicates WIFI waiting to connect, and the steady yellow light indicates WIFI connected.

Note: This section is English instruction content using the illustration in the first column on the left as an example.

Product Accessories List

1. Electronic Eyepiece
2. Smartphone Stretch Clip
3. USB Type-C Charging Cable
4. EVA Ring (for connecting and fixing small-sized eyepieces)
5. Cleaning Cloth

Introduction to the Electronic Eyepiece

1. Power and WIFI Switch
2. WIFI Indicator Light
3. TF Card Slot
4. Charging/Working Status Indicator Light
5. USB Type C Interface
6. Reset Button
7. Smartphone Clip Slot
8. Smartphone Clip Release Switch
9. Lens
10. Clip Left and Right Pressure Switches

Eyepiece Usage Instructions

1. Insert the TF card and press the button for 3 seconds to turn on the device. (Note: The memory card needs to be formatted for the first use, and the APP will remind you with a pop-up window.)

2. Scan the QR code in the manual with your smartphone to download the APVision software.

3. After installation, open the APP and click “Connect Device” to go to the device search WIFI hotspot interface. Please find the WIF! named: Apexel-DC001-xxxxxx, default password: 12345678. Note: Double-click the button to turn WIFI on/off.
   Electronic Eyepiece Indicator Light Description
   Blue light steady on – Device is powered on.
   Blue light flashing – The device is low on battery.
   Yellow light flashing – WIFI is waiting to connect.
   Yellow light steady on – WIFI is connected

4. When the WIFI connection is successful, it will jump to the real-time preview screen of the APP, and operations such as shooting, recording, viewing, and downloading are all completed within the app.

5. Connecting to a Telescope
   Press both sides of the eyepiece clip without releasing and attach it to the telescope’s eyepiece end to start shooting and using,

6. Connecting to a Microscope
   First, place the EVA ring over the microscope’s eyepiece end, thenpress both sides of the eyepiece clip without releasing and attach itto the microscope’s eyepiece end to start shooting and using. (Note: Using the EVA ring increases the outer diameter size to make the clipmore secure. Some microscope eyepiece ends with a diameter larger than 025MM do not need to use the EVA ring.)

Other Instructions

Charging

• Connect the power adapter, with Type-C for power supply.
• The red light will stay on during charging, and it takes about 2.5-3 hours to fully charge.
• The green light will stay on when fully charged.
• The battery life is approximately 150 minutes.

Reset

• Use a card removal pin to briefly press the reset button.
• The device will shut down, and all indicator lights will go out.

Data Transfer

• Insert the USB Type-C end of the data cable into the port, and the other end of the USB plug into the computer’s USB port for data transfer and reading.
• At this point, briefly press the electronic eyepiece switch button to cycle through the selection modes “Read TF Card ↔ Mount Camera”

Note: If you need to mount your smartphone on the clip for observation, please first place your smartphone into the stretch clip.

• Then, insert the smartphone along with the stretch clip into the electronic eyepiece end.

• Press the unlock button and slide up to remove the smartphone and stretch the clip.

• The electronic eyepiece is a cutting-edge device that seamlessly links your smartphone to a range of optical instruments, from microscopes to telescopes. It enables direct viewing and recording of observations on your phone, simplifying the capture of stunning images and videos. Plus, it facilitates easy sharing of these memorable moments, enhancing the user experience and making observation more engaging and fun.

• If there is no operation within 3 minutes in the powered-on state, the electronic eyepiece will automatically shut down. Please turn it on again if you need to use it.

• Thank you very much for choosing our smartphone electronic eyepiece.

• Please read this manual carefully before using this lens and we suggest you keep it well for future reference.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class  B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

APVision

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>