OneOdio A200 Hybrid ANC Wireless Headphones User Manual
- September 27, 2024
- OneOdio
Table of Contents
OneOdio A200 Hybrid ANC Wireless Headphones
Attachment List
Technical Specifications
- Product Model : A200
- Speaker Sensitivity: 118 3dB at 1kHz
- Impedance : 320 10%
- Frequency Response : 20Hz ~ 20kHz
- Microphone Sensitivity : -38 1dBV/Pa
- Bluetooth Version : V5.4
- Battery Capacity : 1000mAh
- Bluetooth Distance : 10 meters
- Playback Time (ANC OFF): About 100 hours
- Playback Time (ANC ON): About 60 hours
- Charging Time : <3h
- Charging Interface : USB Type-C
- Input Voltage : DC 5V 1A
- Noise Reduction Depth : Up to -38dB
- Product Dimensions (L x W x H): 183.12 x 91.2 x 212.82 mm
- Total Weight: 285 grams (excluding MIC)
Button Functions
- Multi-Function Button (MFB)/Power On/Off/Play/Pause/Answer/Hang Up/ Volume Up/Volume Down/Previous Track/Next Track/Clear Pairing
- ANC Button/ANC Mode Switch/Voice Assistant On/Voice Assistant Off
- Indicator Light
- 3.5mm Audio Jack
- Microphone
- Type-C Charging Port
- Mute Button
LED Indicator
- Pairing Mode: Red and blue lights flashing alternately
- Pairing Successful: Blue light flashes for 1 second
- Charging State: Red light stays on
- Charging Complete: Blue light stays on
Bluetooth Pairing
- Keep the Bluetooth headset and the mobile phone (or other connected devices) within 1 meter (3 ft.) of each other; the closer the distance, the easier the pairing.
- With no external devices connected, press and hold the MFB until the white light flashes rapidly, indicating that the headset is in pairing mode.
- Enable Bluetooth on your mobile phone (or other Bluetooth device), and begin scanning for devices. Your mobile phone will list all detectable Bluetooth devices. Select the headset labeled “A200” from the available Bluetooth devices list. When the blue light flashes for 1 second, it indicates a successful pairing.
- Bluetooth Auto-Reconnect:
- After initial pairing, the headset automatically reconnects to the last connected device on subsequent uses.
- If the connection is lost but the device returns within the effective range within 5 minutes, the headphones will automatically reconnect.
Multi-device
The wireless Bluetooth headset supports connecting to two devices
simultaneously. Please complete the pairing process with the first device
first, then turn off the Bluetooth function on the first device. Repeat the
pairing steps with the second device. After successfully connecting the second
device, turn the Bluetooth function on the first device back on. At this
point, both devices will be connected to the headset simultaneously.
Active Noise Cancellation (ANC)
- In the powered-on state, press the ANC button once to enter transparency mode, press again to switch to ANC ON mode, and press once more for ANC OFF.
- After powering on, press the ANC button to cycle through transparency/ ANC ON/ANC OFF modes.
Charging the Headset
- Connect the Type-C charging cable provided with the headset to the charger.
- The indicator light will turn red during charging.
- Once the headset is fully charged, the red indicator light will turn off. Disconnect the charger from the power outlet.
- Use only chargers approved by OneOdio. Unauthorized or non-company chargers may damage the headset or, in extreme conditions, cause explosions, or may void the product warranties.
- Repeated charging and discharging of the headset will lead to a decrease in battery performance over time, which is a normal occurrence for all rechargeable batteries.
Safety Precautions
- This product is not a toy. Children should use the headset only under adult supervision.
- Do not place the device in environments that are too hot or too cold (below 0°C/32°F or above 45°C/113°F).
- Keep the device’s indicator light away from the eyes of children or animals.
- To prevent hearing damage, avoid using the headset for long periods at high volumes for extended periods of time.
- For your safety, please be mindful of traffic conditions when using the headset while driving or walking.
- To avoid interference with a pacemaker, do not wear or place the headset within 10 cm (4 in.) of the device.
- Do not use Bluetooth devices during thunderstorms, as they can cause the device to malfunction and increase the risk of electric shock.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
The device has been evaluated to meet the general RF exposure statement. The device can be used in portable exposure conditions without restriction.
LIMITED WARRANTY
Our friendly customer service team is ready and waiting to help. Here is how we can connect
Customer Service
-
Global: http://www.supereq.net
-
Global:+85269403848 (Mon to Fri 9:00 am-6:30 pm, UTC +8 HKT)
-
Manufacturer: Yenona Audio Co.,Limited
-
ADD.: Building 41-1, No. 3 Nanshan Road, Songshan Lake Park, Songshan Lake Management Committee, Dongguan City, Guangdong Province, China
Product Model : A200 -
FCC ID : 2AR6F-A200 Made in China