MAVRiK Strikervr Pro Instruction Manual
- June 3, 2024
- MAVRiK
Table of Contents
STRIKERVR MAVRIK-PRO // PRODUCT MANUAL
MAVRIK-PRO / PRODUCT MANUAL
Strikervr Pro
With the StrikerVR Mavrik-Pro, players will experience virtual reality like
never before—the future of VR gaming starts now. Its innovative recoil and
haptic technologies unlock incredible force effects that can simulate
limitless tools and environments.
You need to feel it to believe it.For the latest product information,
requirements, warranty, and anything else please visit support.strikervr.com
MAVRIK-PRO OVERVIEW
ACTIVE TOUCH AREAS
AT1: Trigger Sense
AT2: Trigger Grip
AT3: Reload
AT4: Front Hand Grip Face
AT5: Front Hand Grip
AT6: Under Touchpad Grip
AT7: Forward Bar Grip
AT8: Slide| USER BUTTONS
F1: Front Top Button
F2: Front Bottom Button
—
LT/RT: Left/Right Touchpad
L/R: Left/Right Side Button
—
TRIG: Trigger
PWR: Power Button| ACCESSORIES
Power Adapter
USB-C Charging Cable
UK Power Adapter Plug
EU Power Adapter Plug
OTHER
LH/RH: LED Halo
LS/RS: LED Strip
USB-C: Charging Port
---|---|---
GET THIS: Our USB-C powers both ways. Wanna charge your cell phone? Plug it into the Mavrik!
ACTIVE TOUCH
Get in the game with Active Touch! The Mavrik-Pro’s Active Touch technology
unlocks a new world of possibilities through unique gameplay and user
interaction.
Located strategically on the Mavrik-Pro at the areas of optimal interaction,
the Active Touch enables innovative swipe and gesture functions. It also
allows for left/right-hand
recognition and alternative grip placements.
QUICK START
First, ensure that nothing has been damaged during shipping and that all items are in the box.
- To start-up the device push & hold the Power button which is located on the back underside of the Mavrik-Pro (see “Mavrik-Pro Overview” section).
- The device will then begin its startup sequence and you will hear / feel the movement of the haptic engines. The startup sequence ends when the LED Halo/Strip are softly glowing and the haptic engines have ceased motion.
- The Mavrik-Pro’s initial state is preprogrammed with various demo blaster profiles. Cycle through these modes by utilizing the L / R Side buttons. The haptic modes can be initialized by squeezing the Trigger or interacting with Active Touch areas.
- See “Demo Blaster Profiles” section (pg 8) for additional information on individual profiles.
GET THIS: Your Mavrik-Pro’s battery should be at 30-50% charge so you can test the goods immediately.
DEVICE MODES
DEMO MODE
By default, device is set to demo mode for initial startup. If no buttons have
been pressed for 15 seconds, blaster will blink blue, meaning it is
advertising for connection.
CALIBRATION
To Enter Calibration Mode: With the device ON, hold both Front buttons (F1 &
F2) and both Side buttons (L & R) for 5 seconds. Device will restart following
calibration.
UNPAIRING
To Clear Current Pairing: with the device OFF, hold both Side buttons (L & R)
and press Power button. Device will blink blue 3 times then continue normal
operation.
DEMO BLASTER PROFILES
Your Mavrik-Pro is package with preprogrammed blaster profiles which are
available at initial startup in “Demo Mode.” Scan QR for a walk-through of
each blaster.
FIRMWARE UPDATE
To Enter Firmware Update Mode: With the device OFF, depress both Touchpads (LT
& RT) then press and hold the Power button for 5 seconds. Device will restart
following firmware update.
GET THIS: What are MetaSports? The next evolution of Esports, where the
metaverse is your arena!
CHARGING YOUR MAVRIK-PRO
Ok, so you’ve used all your blaster juice; time to recharge.* Here’s how:
-
Unpack all the accessories, and then plug the USB-C charging cable into the power adapter and an available outlet. Make sure you are utilizing the appropriate converter adapter.
-
Plug the other end of the charging cable into the USB-C charging port located next to the Power button.
GET THIS: To display current power level, momentarily (<1 sec) press and release Power button -
You should see an illuminated LED Halo and a front to back filling movement on the LED Strip, which means the batteries are charging. There are 6 charging stages ranging from red to green.
-
When the charging motion ends, you should see solid green flashing to white on the LED Halo and Strip. This means the battery is fully charged.
Time to get your game on!
- Battery life is variable, depending on gameplay
MODULAR TRACKING
The Mavrik-Pro features a removable top plate which allows for installation of
various tracking mounts & modules.
SETUP & INTEGRATION
https://support.strikervr.com/
TRACKING MOUNTS & MODULES
See individual Tracking Mount/Module manuals for setup instructions. For
complete listing of compatible HMD systems and Tracking Mounts/Modules, visit
StrikerVR.com.
STRIKERVR SUPPORT CENTER
Scan QR or visit support.strikervr.com for all your setup & integration needs,
including:
- Developers Setup
- Blaster to HMD Pairing
- Tracking System Setup
- Device Manager
- Demo Experience Download
- Digital Asset Download
- Haptic Editor
CARE & MAINTENANCE
Unplug product from its power source before cleaning. Please only use clean
and dry microfiber cloths for cleaning the Mavrik-Pro Blaster & Accessories.
Do not clean the device with any liquid or chemical cleansers. Do not clean
the surface of the device with alcohol or any other abrasive cleaning
solution. Only use non-abrasive,
alcohol free anti-bacterial wipes and wipe gently.
- Do not leave the Mavrik-Pro Blaster & Accessories in direct sunlight. Exposure to direct sunlight can damage the plastics over time by discoloring them
- As with any electronic devices, avoid exposure to water or fluids
- Operating Environment Temperature: 10-40°C / 50-104°F, min. humidity 5%, max humidity 95% RH (non-condensing)
- Non-Operating (Shipping / Storage): -30-65°C / -22 149°F, 85% RH
- Store components in a safe, climate-controlled environment when not in use to minimize unintentional damage or environmental exposure
ELECTRICAL SPECIFICATIONS
| COMPONENT | RATING | CONTINUOUS OUTPUT POWER |
|---|---|---|
| Mavrik-Pro Blaster | 100W | 60W |
| Charging | 100W | 100W |
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has been
evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
READY forthe METAVERSE
STRIKERVR.COM
SUPPORT@STRIKERVR.COM
STRIKERVR MAVRIK-PRO // PRODUCT MANUAL
STRIKERVIRTUALRECOIL
STRIKERVR
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>