NEC 1-2-Series LCD Color Monitor Instructions

NEC 1-2-Series LCD Color Monitor

Product Information

Specifications:

• Product Type: LCD Color Monitor
• Power Input: AC 100-240V, 50/60Hz
• Resolution: Dependent on model
• Screen Size: Dependent on model
• Color Depth: 16.7 million colors

Product Usage Instructions

Safety Precautions and Maintenance:
Before setting up and using the LCD color monitor, it is important to follow these safety precautions:

• Read and understand all symbols and warnings in the manual.
• Do not attempt to repair the product yourself. Contact your dealer for repairs.
• Avoid using the product if there is any structural damage.
• Do not touch the power plug with wet hands.
• Ensure proper earthing of the equipment to prevent electric shock.
• Use trained service personnel for installation to avoid damage or injury.
• Prevent tipping and falling by installing the product in a stable location.

Setting Up the Monitor:
When setting up the LCD color monitor:

• Place the monitor on a stable surface or use a mounting accessory for support.
• Refer to the mounting equipment instructions for proper attachment and removal.
• Avoid covering the vents on the product to prevent damage, electric shock, or fire.

FAQ (Frequently Asked Questions)

1. Q: What should I do if the monitor emits smoke or strange odors?
   A: Unplug the power cord immediately and contact your dealer for repairs. Do not attempt to fix it yourself.

2. Q: Can I use a 2-pin plug converter adapter with this monitor?
   A: No, it is required to connect the power cord directly to a wall outlet and ensure proper earthing to prevent electric shock.

3. Q: How can I ensure the monitor is stable during earthquakes?
   A: Install the monitor in a stable location and take measures to prevent tipping over. While these measures reduce the risk, they may not guarantee effectiveness against all earthquakes.

Important Information

Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR:

About the Symbols
To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well as damage to property. The symbols and their meanings are described below. Be sure to understand them thoroughly before reading this manual.

WARNING| Failing to heed this symbol and handling the product incorrectly could result in accidents leading to major injury or death.
---|---
CAUTION| Failing to heed this symbol and handling the product incorrectly could result in personal injury or damage to surrounding property.

Examples of symbols

WARNING

** UNPLUG THE POWER CORD| Unplug the power cord if the product malfunctions. Should the product emit smoke or strange odors or sounds, or if the product has been dropped or the cabinet broken, turn off the product’s power, then unplug the power cord from the power outlet. Contact your dealer for repairs. Never try to repair the product on your own. Doing so is dangerous.
DO NOT MODIFY| Do not open or remove the product’s cabinet. Do not disassemble the product. There are high voltage areas in the product. Opening or removing product covers and modifying the product may expose you to electric shock, fire, or other risks. Refer all servicing to qualified service personnel.
PROHIBITED| Do not use the product if it has structural damage. If you notice any structural damage such as cracks or unnatural wobbling, please refer servicing to qualified service personnel. If the product is used in this condition, the product may fall or cause personal injury.
WARNING**

Handling the power cord.
**PROHIBITED**| Do not scratch or modify the cord.

• Do not place heavy objects on the cord.
• Do not let the weight of the product rest on the cord.
• Do not cover the cord with a rug, etc.
•  Do not bend, twist or pull the cord with excessive force.
• Do not apply heat to the cord.

Handle the power cord with care. Damaging the cord could lead to fire or electric shock. If the cord gets damaged (exposed core wires, broken wires, etc.), turn off the product’s power, then unplug the power cord from the power outlet. Ask your dealer to replace it.

DO NOT TOUCH| Do not touch the power plug if you hear thunder. Doing so could result in electric shock.
DO NOT TOUCH WITH WET HANDS| Do not connect or disconnect the power cord with wet hands. It may cause an electric shock.
** REQUIRED| Please use the power cord provided with this product in accordance with the power cord table. Do not exceed the product’s specified power supply voltage where it is installed. Doing so could result in a fire or electric shock. Please refer to the power supply voltage information in the specification. If a power cord is not supplied with this product, please contact us. For all other cases, please use the power cord with the plug style that matches the power socket where the product is located. The compatible power cord corresponds to the AC voltage of the power outlet and has been approved by, and complies with, the safety standards in the country of purchase.
** MUST BE EARTHED| This equipment is designed to be used in the condition of the power cord connected to the earth. If the power cord is not connected to the earth, it may cause electric shock. Please make sure the power cord is connected to the wall outlet directly and earthed properly. Do not use a 2-pin plug converter adapter.
** REQUIRED**| For proper installation it is strongly recommended to use a trained service person.

Failure to follow the standard installation procedures could result in damage to the product or injury to the user or installer.

REQUIRED| Please install the product in accordance with the following information. This product cannot be used or installed without the table top stand or other mounting accessory for support. When transporting, moving, or installing the product, please use as many people as necessary to be able to lift the product by the four handles without causing personal injury or damage to the product.

• We recommend two or more people for the M431-2/M501-2/M551-2 and four or more people for the M651-2.
• M651-2: DO NOT use this product on the floor with the table top stand. Please use this product on a table or with a mounting accessory for support.

Please refer to the instructions included with the optional mounting equipment for detailed information about attaching or removing. Do not cover the vent on the product. Improper installation of the product may result in damage to the product, an electric shock or fire.

**** REQUIRED| Do not install the product in the locations below:

• Poorly ventilated spaces.
• Near a radiator, other heat sources, or in direct sunshine.
• Continual vibration areas.
• Humid, dusty, steamy, or oily areas.
• An environment where there are corrosive gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, ozone, etc.).
•  Outdoors.
• High-temperature environment where humidity changes rapidly and condensation is likely to occur.
• A ceiling or wall that is not strong enough to support the product and mounting accessories. Do not mount the product upside down.

---|---
REQUIRED| Prevent tipping and falling for earthquakes or other shocks. To prevent personal injury or damage to the product caused by tipping over due to earthquakes or other shocks, make sure to install the product in a stable location and take measures to prevent falling. The measures to prevent falling and tipping are intended for reducing the risk of injury, but may not guarantee the effectiveness against all earthquakes.

The product may tip causing personal injury.

• When using the product with the optional table top stand, fasten the product to a wall using a cord or chain that can support the weight of the product in order to prevent the product from falling. Depending on the table top stand, the stand has the structure for preventing tipping.
  Please refer to the table top stand manual.

• Be sure to remove the cord or chain from the wall before moving the product to prevent personal injury or damage to the product.

The product may fall causing personal injury.

• Do not attempt to hang the product using an installation safety wire.
• Please install the product in an area on the wall or ceiling strong enough to support the weight of the product.
• Prepare the product using mounting accessories, such as hook, eyebolt, or mounting parts, and then secure the product with a safety wire. The safety wire must not be tight.
• Please make sure the mounting accessories are strong enough to support the product weight and size before installing it.

WARNING

REQUIRED| Stability Hazard.
The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• ALWAYS use stands or installation methods recommended by the manufacturer of the product set.
• ALWAYS use furniture that can safely support the product.
•  ALWAYS ensure the product is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls.
• ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed.
• NEVER place a product in an unstable location.
•  NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.
• NEVER place the product on cloth or other materials that may be located between the product and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed. If the existing product is going to be retained and relocated, the same considerations as above should be applied.

PROHIBITED| Do not place this product on a sloping or unstable cart, stand or table. Doing so could lead to falling or tipping and cause personal injury.
PROHIBITED| Do not insert objects of any kind into the cabinet slots. It may cause electric shock, fire, or product failure. Keep objects away from children and babies. If objects get into the cabinet slot, turn off the product’s power, then unplug the power cord from the power outlet. Contact your dealer for repairs.
DO NOT WET| Do not spill any liquids into the cabinet or use your product near water. Immediately turn off the power and unplug your product from the wall outlet, then refer servicing to qualified service personnel. It may cause an electric shock or start a fire. Do not install the product under equipment that discharges water, such as air conditioners.
PROHIBITED| Do not use flammable gas sprays to remove dust when cleaning the product. Doing so could lead to a fire.
** REQUIRED| Securely fasten the Option Board. Ensure the Option Board is securely fastened using the original screws to prevent the Option Board from falling out the product. A falling Option Board may expose you to danger.
****PROHIBITED| Usage of the product must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system.
CAUTION**

Handling the power cord.
** REQUIRED| The monitor should be installed close to an easily accessible power outlet.
** REQUIRED| When connecting the power cord to the product’s AC IN terminal, make sure the connector is fully and firmly inserted. An incomplete connection of the power cord may cause overheating of the plug; it allows dust to get on the plug connection, which can lead to a fire. Touching the pins of a partially inserted plug may lead to an electric shock. Fasten the power cord to the product by attaching the screw and clamp to prevent loose connection. (Recommended Fasten Force: 120 – 190 N•cm).
REQUIRED| Handling the power cord by following below to avoid fire or electric shock.

• When connecting or disconnecting the power cord, pull the power cord out by holding onto its plug.
• Unplug the power cord from the power outlet before cleaning the product or when not planning to use the product for an extended time.
• When the power cord or plug is heat or damaged, unplug the power cord from the power outlet, and contact a qualified service person.

** REQUIRED| Regularly dust off the power cord by using a soft dry cloth.
** REQUIRED| Before moving the product, make sure the product power is off, then unplug the power cord from the power outlet and check that all cables connecting the product to other devices are disconnected.
** PROHIBITED| Do not use the power cord with a power tap. Adding an extension cord may lead to fire as a result of overheating.
PROHIBITED| Do not bind the power cord and the USB cable. It may trap heat and cause a fire.
** PROHIBITED| Do not connect to a LAN with excessive voltage. When using a LAN cable, do not connect to a peripheral device with wiring that might have excessive voltage. Excessive voltage on the LAN port may cause an electric shock.
PROHIBITED| Do not climb on the table where the product is installed. Do not install the product on a wheeled table if the wheels on the table have not been properly locked. The product may fall, causing damage to the product or personal injury.
REQUIRED| Installation, removal, and height adjustment of the optional table top stand.

• When installing the table top stand, handle the unit with care to avoid pinching your fingers.
•  Installing the product at the wrong height can cause tipping.

Please install your product at proper height to prevent personal injury or damage to the product.

**PROHIBITED| Do not push or climb on the product. Do not grab or hang onto the product. Do not rub or tap the product with hard objects. The product may fall, causing damage to the product or personal injury.
**PROHIBITED| Do not hit or strike the screen.
Do not push against the screen with a pointed object.
It can cause serious damage to the product or personal injury.
** REQUIRED**| Incorrect usage of batteries can result in leaks or bursting.

• Use the specified batteries only.
•  Insert batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment.
• Do not mix battery brands.
• Do not combine new and old batteries. This can shorten battery life or cause liquid leakage of batteries.
• Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye.

• If you will not use the remote control for a long time, remove the batteries.
• Leaving a battery in an extremely high temperature surrounding environment, or a battery subject to extremely low air pressure, that can result in an explosion or the leakage of flammable liquid or gas.
• Properly dispose of depleted batteries. Disposal of a battery into water, fire, or a hot oven, or mechanically crushing, cutting, or modifying a battery can result in an explosion.
• Do not short-circuit the batteries.
• Do not charge the batteries. The batteries provided are not rechargeable.
•  Contact your dealer or local authorities when disposing of batteries.

---|---
** PROHIBITED| Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low- temperature burns.
** REQUIRED| Suitable for entertainment purposes at controlled luminous environments, to avoid disturbing reflections from the screen.
** REQUIRED| We recommend wiping clean the ventilation holes a minimum of once a month. Failure to do so could lead to fire or electric shock or damage to the product.
** REQUIRED| To ensure the product’s reliability, please clean the ventilation holes at the rear side of the cabinet at least once a year to remove dirt and dust. Failure to do so could lead to fire or electric shock or damage to the product.
REQUIRED| Avoid locations with extreme temperatures and humidity. Failure to do so could lead to fire or electric shock or damage to the product. The usage environment for this product is as follows:

• The operating temperature:

0 °C to 40 °C/32 °F to 104 °F/humidity: 20 to 80% (without condensation)

• The storage temperature:

-20 °C to 60 °C/-4 °F to 140 °F/humidity: 10 to 80% (without condensation)

Power Cord Table

• Please use this power cord under 125 V power supply.

NOTE: This product can only be serviced in the country where it was purchased.
MultiSync is a trademark or registered trademark of Sharp NEC Display Solutions, Ltd. in Japan and other countries. Intel and the Intel logo are trademarks of Intel Corporation or its subsidiaries.
All other brands and product names are trademarks or registered trademarks of their respective owners.

Installing an Option Board

You can install Option Boards that are compatible with Intel® Smart Display Module Small (Intel® SDM-S) and Intel® Smart Display Module Large (Intel® SDM-L) specifications.

1. Turn off the main power switch.

2. Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor.
   NOTE: To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor’s screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can damage the monitor.

3. Remove the SLOT COVER a and b, and then the OPTION COVER a (Figure 1). When using Intel® SDM-L type option board, slide the CENTER RAIL to the right and remove it. Reverse the process to re-attach it (Figure 1-1).

4. Attach the included OPTION COVER b with the removed screws (Figure 2).

5. Insert the Option Board into the monitor and affix it in place with the removed screws (Figure 2). (Recommended fasten force: 50 – 80 N•cm).

6. To close the opening of the slot you did not use, reattach the SLOT COVER (a or b) with the removed screws (See Figure 1). When attaching the SLOT COVER a or b, use the holes (A) shown below in the SLOT COVER (Figure 3).

NOTE: Unless your monitor is purchased as part of a special bundle package, no Option Boards will be in the box or installed in the monitor. These are optional accessories available for separate purchase. Please contact your supplier for a list of Option Boards available for your monitor.

• Make sure the board is inserted into the slot in the correct orientation.
• Do not apply excessive force to manipulate the Option Board before attaching it with screws.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>