NETGEAR RS280 Nighthawk Tri-Band WiFi Router User Guide
- September 26, 2024
- NETGEAR
Table of Contents
NETGEAR RS280 Nighthawk Tri-Band WiFi Router
Specifications
- Power LED
- Internet LED
- LAN 1-4 LEDs
- Reset button
- Power on/off button
- Gigabit LAN ports
- Router USB LED
- 2.4 GHz band LED
- 5 GHz band LED
- 6 GHz band LED
- Sync/WPS button
- LED on/off button
- Power adapter*
- Ethernet cable
- 2.5G LAN ports
- USB port
- 2.5G Internet port
- Power connection
Frequently Asked Questions
Q: What should I do if I encounter installation issues?
If installation problems arise, try the following steps:
-
Turn off modem and router, disconnect them, then reboot the modem.
-
Reconnect router to modem and attempt installation using the
Nighthawk app again. -
If issues persist, install the router via the router web interface by visiting routerlogin.net.
-
Additional setup assistance can be found at netgear.com/routerhelp.
Q: How can I access NETGEAR ArmorTM trial?
To access NETGEAR Armor trial, tap on the SECURITY tile within the Nighthawk app to explore and activate the complimentary trial for enhanced network security.
Q: Where can I find more information about device setup?
For detailed setup instructions and troubleshooting tips, visit netgear.com/support or refer to the NETGEAR Community at community.netgear.com for assistance.
LET’S GET STARTED
-
On your mobile phone, scan the QR code to download the Nighthawk app and follow the setup instructions
If you used the Nighthawk app before, go to the dashboard and tap the top left menu, then SET UP A NEW NIGHTHAWK SYSTEM. -
Check your network security with NETGEAR ArmorTM NETGEAR Armor protects your family’s WiFi with an automatic shield of security across your connected devices.
Tap the SECURITY tile in your Nighthawk app to explore your complimentary Armor trial and protection score. -
Do more with the app
Check out everything you can do on the Nighthawk app! Pause the Internet, run a speed test, set smart parental controls, and more.
CONTENTS
*Varies by region. Packages in some regions might also include plug adapters.
OVERVIEW
NEED HELP?
If you’re having problems with the installation, you can try these tips:
- Turn off your modem and router and disconnect them. Reboot your modem. Reconnect your router to your modem and try installing with the Nighthawk app again.
- If you’re still unable to install your router using the Nighthawk app, install it using the router web interface. Visit routerlogin.net to access the router web interface.
You can also find more setup help online at netgear.com/routerhelp.
SUPPORT AND COMMUNITY
Get your questions answered and access the latest downloads at
netgear.com/support, and check out our NETGEAR
Community at community.netgear.com.
REGULATORY AND LEGAL
For regulatory compliance information including the EU Declaration of
Conformity, visit
netgear.com/about/regulatory. See the
regulatory compliance document before connecting the power supply. For
NETGEAR’s Privacy Policy, visit
netgear.com/about/privacy-policy.
Applicable to 6 GHz devices only: Only use the device indoors. The operation
of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and
aircraft, except that operation of this device is permitted in large aircraft
while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125
GHz band is prohibited for control of or communications with unmanned aircraft
systems.
© NETGEAR, Inc., NETGEAR, the NETGEAR Logo and the Nighthawk logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
NETGEAR, Inc.
350 East Plumeria Drive San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD Floor 6, Penrose Two, Penrose Dock, Cork, T23 YY09, Ireland
References
- English - NETGEAR Communities
- I’m having trouble installing my NETGEAR router; what do I do? - NETGEAR Support
- NETGEAR Support | NETGEAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>