pooky Rechargeable Wall Fitting Chukka Instructions
- September 26, 2024
- pooky
Table of Contents
Rechargeable Wall Fitting Chukka
“`html
Product Specifications:
- Product Name: Rechargeable Lamp
- Power Source: Rechargeable battery
- Material: Plastic and Metal
- Color: Various options available
- Light Source: LED
- Charging Time: 4 hours
- Usage Time: Up to 8 hours
Product Usage Instructions:
Rechargeable Fitting Instructions:
Before using the lamp, ensure it is fully charged by connecting
it to a power source for at least 4 hours. Once charged, switch on
the lamp using the designated power button.
Fitting Cleaning Instructions:
1. Always switch off the lamp before cleaning.
2. Do not use abrasive cleaners to clean the lamp.
3. Wipe surfaces with a soft dry cloth to remove any dust or
dirt.
Shade Guide:
Remove Shade Ring:
If your chosen shade includes a plastic ring reducer, follow
these steps:
- Pinch the ends of the ring together at the gap.
- Gently pop out the plastic ring reducer.
Lampshade Installation:
If you are using a lampshade with the lamp, follow these
steps:
- Slot the shade over the lamp’s Genesis.
- Ensure the shade sticks to the magnets for secure
placement.
If you encounter any unresolved technical issues with the
product, please contact us via email at hello@pooky.com or visit
our website at www.pooky.com.
FAQ (Frequently Asked Questions):
Q: How do I know when the lamp is fully charged?
A: The lamp will have a charging indicator that turns green when
fully charged.
Q: Can I use the lamp while it is charging?
A: It is recommended to avoid using the lamp while it is
charging for safety reasons.
“`
RECHARGEABLE FITTING INSTRUCTIONS
CAUTION The manufacturer and distributor accept no liability for incorrect
installation. This product is produced in conformity with all relevant safety
regulations. If using a ladder read all advice and guidelines outlined by the
Health and Safety Executive via www.hse.gov.uk. Ensure the installation
position of this product is in a safe and accessible location and must be out
of reach of children. Fixings are provided however, you may require different
fixings for your surface type to ensure the fitting remains secured and flush
to the surface. (Please note, continually removing the Genesis from the
fitting for recharging may cause the fixings to loosen over time if fixings
used are not appropriate for your surface).
INSTRUCTIONS This fitting is compatible with the Genesis from Pooky. Decide
the positioning of your fitting. Before drilling ensure there are no hidden
cables or pipes behind the surface area. Separate the bracket from the fitting
via the side screws. Secure the bracket to your surface using suitable fixings
for your surface type. Secure the fitting over the bracket and re-align the
size screws previously removed. Secure the Genesis and your chosen shade to
the fitting using the shade guide below. When separating the Genesis and shade
from the fitting for recharging holding the fitting is advised.
FITTING CLEANING INSTRUCTIONS Always switch off before cleaning. Do not use
abrasive cleaners to clean this lamp. Wipe surfaces with a soft dry cloth.
SHADE GUIDE
REMOVE SHADE RING
Inside your chosen shade may be a plastic ring
reducer. If so, this will need to be removed. Simply
pinch the ends together at the gap and pop it out.
LAMPSHADE
If using a lampshade, slot the shade over the Genesis until the shade sticks
to the
magnets.
If you experience any unresolved technical issues with the product, please contact us via our email, hello@pooky.com or our website www.pooky.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>