pooky MIFRD101GLAMER Long and Thin Fredrick Mirror Instructions

Table of Contents

pooky-MIFRD101GLAMER-Long-and-Thin-Fredrick-Mirror-
PRODUCT

Important Notes
- It is essential to hang the mirror on a wall of suitable load-bearing capacity. If unsure about your wall’s capacity, seek advice.
- There are different fixings available for various wall types. Make sure to use the correct type for your wall.
- Avoid hanging the mirror in areas close to electrical wiring or pipes.
Hanging Instruction Warnings
- Do not strike the mirror glass with hard or pointed objects.
- Avoid positioning the mirror close to excessive heat or moisture.
- Avoid hanging the mirror in areas with a risk of accidental impact.
Hanging Instructions
- Identify a suitable wall location for hanging the mirror.
- Use the provided screws and fixings to attach the backplate securely to the wall.
- Attach the wall plate to the backplate using the screws.
- Hang the mirror on the wall plate securely.
- If you encounter any unresolved technical issues with the product, please contact us via email at hello@pooky.com or visit our website at www.pooky.com.

Q: What should I do if I’m unsure about my wall’s load-bearing capacity?
- A: It is recommended to seek advice from a professional to assess your wall’s capacity before hanging the mirror.
Q: Can I use any type of fixing for hanging the mirror?
- A: No, it is important to use the correct type of fixing suitable for your wall type to ensure secure mounting of the mirror.

LONG AND THIN FREDRICK MIRROR MOUNTING INSTRUCTIONS

pooky-MIFRD101GLAMER-Long-and-Thin-Fredrick-Mirror-
FIG-1

IMPORTANT

Your mirror must be hung on a wall of suitable load-bearing capacity.
Please seek advice if you are unsure about your wall.
Please note there are a variety of fixings available for different wall types.
Please seek advice to ensure you have the correct type for your wall.
Please also ensure your intended hanging area is not situated close to electrical wiring or pipes.

HANGING INSTRUCTIONS

Decide which way you would like to hang the mirror based on the backplate on the back of the mirror.
Drill holes for the wall fixings and screws.
Secure the wall fixings.
Drill the wall plate into place.
Hang the mirror backplate onto the wall plate, ensuring that the two plates are secure.

IF YOU WANT TO STAND YOUR MIRROR

If you intend to use your mirror on the floor or mantle standing, we would advise securing the top of the mirror to the wall to prevent it from tilting forward.
If possible, placing the mirror on a non-slip surface would also support the mirror in remaining upright.

Do not use abrasive cleaning substances to clean the mirror. Clean with a dry microfibre cloth.
If you experience any unresolved technical issues with the product, please contact us via our email, hello@pooky.com, or our website www.pooky.com.