KitchenAid W11339705A Stand Mixer Instruction Manual
- September 25, 2024
- KitchenAid
Table of Contents
KitchenAid W11339705A Stand Mixer
INSTALLATION INSTRUCTIONS
In a few easy steps, you’ll be on your way to enjoying something delicious!
For complete instructions and videos, go online to www.kitchenaid.com/quickstart.
-
Insert the Grind Screw into the Main Housing. Place the Sausage Stuffer plate, matching the notch of the plate with the tab on the bottom of the Main Housing.
-
Insert the desired Sausage Stuffer Tube (large or small) through the Collar. Place it on the Main Housing, turning the Collar by hand until secured but not tightened.
-
Insert the attachment shaft housing into the attachment hub.
Tighten the Attachment hub knob until the attachment is completely secured. -
Feed ground meat into the attachment before sliding the casing on the sausage stuffer tube. This will eliminate air pockets. Lubricate and slide casing over the tube.
-
Turn the Stand Mixer on to Speed 4 and slowly push the ground meat through the grinder. Hold the casing firmly as it fills.
NOTE: Please refer to your Use and Care Guide for detailed instructions.
CUSTOMER SUPPORT
DISCOVER MORE
For exciting recipes, demo videos, product registration, and more — our quick start page has what you need to help you get the most from your new product.
KitchenAid.com | KitchenAid.ca | USA: 1.800.541.6390 | Canada: 1.800.807.6777
®/™ ©2019 KitchenAid. All rights reserved. KITCHENAID and the design of the stand mixer are trademarks in the U.S. and elsewhere.
W11339705A KSMSSA
03/2019
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>