AODSK AED-403 Electric Drum Set with Quiet Mesh Pads User Manual

AED-403 Electric Drum Set with Quiet Mesh Pads

Specifications

• Maximum number of pronunciations: 32 with 6 layers
• 15 drum sets, 165 timbres
• 30 songs
• Adjustable sensitivity parameters for each drum
• Three teaching modes
• Speed control: 30~250 beats/min
• Metronome: 1 to 4 types
• Other functions: parameter storage, reset, recording
• Three-digit LED display
• Interface: Power supply DC, USBMIDI, earphone, audio input,
  audio output

Product Usage Instructions

Kit Select

Select the desired drum kit by using the corresponding buttons
on the electronic drum module.

Metronome

Adjust the metronome settings by selecting the desired tempo and
beat type.

Coach

Utilize the coaching feature for practice and improvement of
drumming skills.

Click

Use the click function to keep time while playing along with
songs or practicing.

Rec

Record your drumming sessions for playback or review.

Song

Select from the available songs stored in the electronic drum
module to play along or practice.

Volume Parameter

Adjust the volume settings of the electronic drum using the
provided controls.

FAQ

Q: Is it normal to hear a current sound in the speaker or

earphone after powering on the electronic drum?

A: Yes, it is normal for electro-acoustic instruments to produce
a slight current sound upon power-on.

Q: What should I do if there are missing items in the

package?

A: If there are missing items in the package, please contact
your dealer for assistance.

UAED-403

FUNCTION INTRODUCTION
Thank you for choosing our electronic drum. Elegant and delicate electronic drum is the perfect combination of modern new electronic technology. Before using this product, you must read the instructions in detail.

KIT SELECT

METRONOME

COACH

CLICK

REC

SONG

–

VOLUME PARAMETER

The maximum number of pronunciations is 32, with 6 layers . 15 drum sets, 165 timbres 30 songs Support the adjustment of the sensitivity parameters of each drum Three teaching modes Speed control: 30~250 beats/min. Metronome: 1 to 4 types Other functions: parameter storage, reset, recording; Three-digit LED display. Interface: power supply DC, USBMIDI, earphone, audio input, audio output

Edge
Note!

surface

Stop the sound wave by grabbing the cymbal

Step Cymbal Combo

This product is an electro-acoustic instrument product. It is normal that there is a little current sound in the speaker or earphone after power-on.
Keep away from “radio, TV, antenna receiver, router, refrigerator, TV, motor and other RF electrical interference sources” during using.
1

CONTENTS
FUNCTION INTRODUCTION ————————————————————1 CONTENTS —————————————————————————–2 INSTALLATION GUIDE ——————————————————————3 Check the attached items ————————————————————————-3 lron pipe holder———————————————————————————–4 Drum pan installation —————————————————————————–4 Install stand and drum pan——————————————————————— 5 Install cymbals, module place pedals ———————————————————- 6 Plug in the striking part cable —————————————————————– 7 HOST BOX SOCKET DIAG RAM ——————————————————8 Power cord ————————————————————————————- 8 USB MIDI port ———————————————————————————- 8 Audio output port —————————————————————————— 8 Audio input port — —————————————————————————– 8 -Earphone jack———————————————————————————–8 Add cymbal port——————————————————————————– 8 Operation guide ———————————————————————- 9 Power on —————————————————————————————-9 Drum kit selection —————————————————————————— 9 Metronome ————————————————————————————- 9 COACh mode ———————————————————————————– 9 SONG mode ———————————————————————————– 10 Drum parameters ——————————————————————————10 Recording function —————————————————————————-10 Save / reset ———————————————————————————— 10 USBMIDI ————————————————————————————— 10 APPENDIX —————————————————————————-11 Drum timbre———————————————————————————– 11 Preset drum kit ——————————————————————————– 11 Demonstration song- ————————————————————————- 11 PRODUCT MAINTENANCE ———————————————————-12 SAFETY PRECAUTIONS ————————————————————–13 WARRANTY CARD ——————————————————————-15
2

INSTALLATION GUIDE
Note
Please follow the instructions and read the “safety precautions” in the User Manual carefully before using.
This product must be installed by adult,please do not install by the minor independently, do not let the minor install it independently.

01

Check the attached items
After opening the package, please check whether it contains all the items immediately. If there are any missing, please contact your dealer.

module

Module bracket

Hi hat

Ride

Crash

Cymbal arm (2pcs)

Cymbal arm (Short)

Tom (3pcs)

Snare

hi-hat pedal

Kick drum pedal

drum stick

Signal Connection cablc

power adapter

Drum key

3

INSTALLATION GUIDE

02

lron pipe holder
The stand is located in a small individual package inside the box.

03

Drum pan installation
Please be careful to pinch your fingers when insalling.

tom1

tom2 tom3

snare
Insert the drum into the tube as shown in the figure,And lock in the plastic head fastening screws.
4

INSTALLATION GUIDE

04

Install stand and drum pan
The stand must be inserted into place and the screws should be tightened to avoid dropping.

Insert the stand and drum pan into the corresponding positions, and then tighten the screws.
Note: (tom, Snare) The functions are different, you must refer to the accessories logo for correct installation!

tom1

tom2

tom3

snare

5

INSTALLATION GUIDE

05

Install cymbals, module, place pedals
Don’t tighten the cymbals, leave some room for them to bob up and down.

Install the cymbal and the main case on the stand as shown in the picture Note: The function of each cymbal is different, you need to refer to the
accessory logo for correct installation!
crash ride

hi-hat

module

hi-hat pedal

Kick drum pedal

6

INSTALLATION GUIDE

06

Plug in the striking part connection cable
Please insert the connection cable in place to avoid poor contact and insert it correctly as shown in the diagram.

Mode A: mechanical kick drum

Please check the drum for sound,If there is no sound, please turn the switch, Switch in a: mechanical kick drum mode, Switch in B: pedal mode.

Mode B: pedal
*This product adopts mode B

Crash

Drun Module

Ride

Hi-hat

Tom1

Tom2

Tom3

Snare

Hi-hat Control

Kick drum pedal

7

MOUDLE SOCKET DIAGRAM

4

5

2

3

1

MP3 SONG
MANU
1 POWER ADAPT CONNECTION
1. When in use, connect the power adapt according to the diagram, insert the power outlet of the module box at one end and 100-240V household power outlet at the other end. (Fig. 1)
2. If you do not use this product for a long time, please pull out the power plug and keep it properly.
2 USB MIDI PORT
The use of electronic drum MIDI USB interface can interact with music devices with MIDI. 1. Through the pre-installed Music software on computers and mobile phones, we can learn to
play,compose music, store and other functions. (Fig. 2) 2. When connected to a computer or mobile phone, the audio output of the device needs to be connected
to the audio input port of the module in order to synchronize the sound effects on the device. (Fig. 5)
3 AUDIO OUTPUT PORT
Audio output port can be connected with active speaker (special electronic drum speaker) and large audio equipment. (Fig. 3)
4 AUDIO INPUT PORT
Audio input port can connect the sound source playback device to the module box for playback (such as MP3. mobile phone and other audio signal input). (Fig. 4)
5 EARPHONE JACK
Connecting headphones monitors the details of percussion and does not disturb others whenplaying without connecting speakers. (Fig. 5)
6 ADD CYMBAL PORT
This port can be added with a cymbal for convenient expansion. (Figure 6)
Note
To prevent damage the equipment, make sure to turn down the volume and shut down all the equipment before making any connection.
Additional cymbals, speakers, headphones and peripherals are not standard accessoriesif necessary you must purchase sparately
8

OPERATION GUIDE

VOLUME

KIT SELECT

METRONOME

COACH

CLICK

REC

SONG

–

PARAMETER

1 power on
1Turn the switch on, the display will light up and the host will be turned on. 2Turn the switch off , the display goes out and the host is turned off.
2 Drum kit selection
1Start up and enter the default drum group selection 01 (drum group No. 01). Use the data wheel to select the addition and subtraction of drum group.
2Or press the < kit > key directly, the screen will jump to 01 (drum group number), and then use the data wheel or < + > < – > button to select the drum group.
3 Metronome
1Press the < click > key to play the metronome, and press the < click > key again to stop playing. 2aPress the < metronome > button, the Indlcator light jumps to the “metronome” button on the second left
to enter the metronome mode, and the screen displays 120 (speed value). Turn the data wheel or< + > < – > button to change the metronome speed. 3aPress the < Select > key in metronome mode, and the screen will jump to the metronome parameter adjustment interface. You can press the < + > < – > button to select the parameters you want to adjust: r.4 (beat type), B04 (beat number), L25 (metronome volume), and then turn the data wheel to adjust the parameters. 4aAfter parameter adjustment, press the < Select > key to confirm and exit the parameter interface (the metronome speed value is associated with “coach” mode and “song” mode).
4 COACH mode
The “coach” training mode of this product can help establish speed, accuracy and endurance and cultivate the practice function of a better sense of rhythm,Make progress under the supervision of “coach” mode! Press the “coach” button to enter the coach mode. In this mode, there are three practice modes. Press the data wheel or . < + > < – > Button to select the practice mode.
1)aExercise mode 1: C-1 beat detection exercise: beat the drum at a fixed speed to train the accuracy of the blow. 2)aPractice mode 2: C-2 silent strike mode: the metronome will sound one section and mute one section to train
when there is no beat Hit accuracy at the prompt of the drill is an advanced version of exercise mode 1. 3)aPractice mode 3: C-3 speed strike practice, the metronome will automatically change the speed from the slowest
to the fastest, and then from the fastest Express speed is reduced to the slowest speed to practice combat endurance. 1aPress the < coach > button, the indicator light will jump to the left three “coach” buttons, and the screen wil display C-1 (practice mode 1) when hitting Value practice, turn the coding wheel to switch the other two practice modes C-2 and C-3.
9

OPERATION GUIDE
2 At this time, press the < click > key, the metronome sounds and starts to hitting the drum for practice. 3aAfter four preliminary beats, the display will show.

(It’s too slow

very good

It’s too fast

4After the exercise, the score of the whole hitting exercise will be displayed, with 0- 100 points to
evaluate the accuracy of the current exercise. 2 5aPress the < Select > key in the C-1 mode to enter the parameter setting interface. You can adjust the
number of practice sections in the practice mode as required The number of sections to practice determines the length of this exercise. 6aPress the < Select > key in the C-2 mode to enter the parameter setting interface. You can adjust the
number of practice sections in the practice mode as required The number of sections to practice determines the length of this exercise. 7aPress the < Select > key in C-3 mode to enter the parameter setting interface. You can adjust the variables of the current bpm. The variables are changed each time Speed value. 8aDuring the practice, you can press the < click > key again to stop the practice.

5 SONG mode

1Press the < > key to start playing songs, and press the < > key again to temporarily stop playing. 2aPress the < Song > button to enter the song mode. When the indicator light jumps to the left four “song” buttons, the screen displays 01 (song number). 3aTurn the data wheel or press the < + > < – > button to select the song to play. 4aPress the < Select > key in the song mode, and the screen will jump to enter the song parameter
setting interface. The drum sound of the Etude can be turned off by default On: select on / off by turning
the data wheel or pressing the < + > < – > button. 5aAfter parameter adjustment, press the < Select > key to confirm and exit the parameter interface.

6 Drum parameters
1Press < kit >, the indicator light jumps to the left “kit” button. When the screen jumps to 01 (drum group number), press < Select > to enter Drum parameter adjustment mode.
2aTap the drum disc you want to adjust, and then press the< + > < – > button to select the sensitivity option you want to adjust: S03 (surface sensitity)T05 (trigger threshold), C05 (crosstalk threshold), R05 (repeated trigger), V01 (drum force curve), L25 (drum volume)
3aChange the parameters by rotating the data wheel, long press the < – > key, the screen displays sav, and these parameters are saved successfully.
All drum settings of this product are factory settings, which have been corresponding to the audio of the moudule.it is unnecessary to change the drum parametres in case there is drum or cymbal
insensitice,triggered for mang times or cascaded. If other drums are insensitive, triggered for many times, crosstalk, etc. after adjustment, you can press and holdpress < + > to restore the factory settings.

7 Recording function

1Press the < rec > button when the indicator light is in “kit” and “click” status, and the screen displays the word “REC” in respiratory flashing status,Enter the recording preparation state.
2aTap any drum and the metronome sounds. At this time, the screen displays “–” in breathing flashing state
and starts recording. 3aPress the < rec> key or < play > key again, the recording stops and ‘A-1″ is displayed on the screen. 4aPress < > to start playing the current recording, and press again to stop playback. 5aIf you enter the recording preparation state again without any hitting, the “A-1” recorded last time is played
back.

8 Save / reset

1Press and hold < – > key, sav will be displayed on the screen and saved successfully. 2aPress and hold the < + > key, the screen displays res, the reset is successful, and the factory setting
is restored.
9 USBMIDI
1Use the usb-b data cable to plug in the USB interface and connect it to the PC . 2aSelect the MIDI device.

10

APPENDIX

Kick 1 Funk Kick 2 Original Kick 3 Poprock Kick 4 Rock Kick 5 Seesion Kick 6 SpeedMetal Kick 7 ClassicDry Kick 8 Modern Kick 9 Jazz Kick 10 Blues Kick 11 Popular Kick 12 Fuse Kick 13 Dancehall Kick 14 Synthgaze Kick 15 Standard Kick
Snare 16 Funk Snare 17 Original Snare 18 Poprock Snare 19 Rock Snare 20 Seesion Snare 21 SpeedMetal Snare 22 ClassicDry Snare 23 Modern Snare 24 Jazz Snare 25 Blues Snare 26 Popular Snare 27 Fuse Snare 28 Dancehall Snare 29 Synthgaze Snare 30 Standard Snare 31 Funk Snare Rim 32 Original Snare Rim 33 Poprock Snare Rim 34 Rock Snare Rim 35 Seesion Snare Rim 36 SpeedMetal Snare Rim 37 ClassicDry Snare Rim 38 Modern Snare Rim 39 Jazz Snare Rim 40 Blues Snare Rim 41 Popular Snare Rim 42 Fuse Snare Rim

43 Dancehall Snare Rim 44 Synthgaze Snare Rim 45 Standard Snare Rim
Tom 46 Funk Tom1 47 Original Tom1 48 Poprock Tom1 49 Rock Tom1 50 Seesion Tom1 51 SpeedMetal Tom1 52 ClassicDry Tom1 53 Modern Tom1 54 Jazz Tom1 55 Blues Tom1 56 Popular Tom1 57 Fuse Tom1 58 Dancehall Tom1 59 Synthgaze Tom1 60 Standard Tom1 61 Funk Tom2 62 Original Tom2 63 Poprock Tom2 64 Rock Tom2 65 Seesion Tom2 66 SpeedMetal Tom2 67 ClassicDry Tom2 68 Modern Tom2 69 Jazz Tom2 70 Blues Tom2 71 Popular Tom2 72 Fuse Tom2 73 Dancehall Tom2 74 Synthgaze Tom2 75 Standard Tom2 76 Funk Tom3 77 Original Tom3 78 Poprock Tom3 79 Rock Tom3 80 Seesion Tom3 81 SpeedMetal Tom3 82 ClassicDry Tom3 83 Modern Tom3 84 Jazz Tom3

Preset drum kit

85 Blues Tom3 86 Popular Tom3 87 Fuse Tom3 88 Dancehall Tom3 89 Synthgaze Tom3 90 Standard Tom3 Crash 91 Funk Crash 92 Original Crash 93 Poprock Crash 94 Rock Crash 95 Seesion Crash 96 SpeedMetal Crash 97 ClassicDry Crash 98 Modern Crash 99 Jazz Crash 100 Blues Crash 101 Popular Crash 102 Fuse Crash 103 Dancehall Crash 104 Synthgaze Crash 105 Standard Crash
Ride 106 Funk Ride 107 Original Ride 108 Poprock Ride 109 Rock Ride 110 Seesion Ride 111 SpeedMetal Ride 112 ClassicDry Ride 113 Modern Ride 114 Jazz Ride 115 Blues Ride 116 Popular Ride 117 Fuse Ride 118 Dancehall Ride 119 Synthgaze Ride 120 Standard Ride
Hi-Hat 121 Funk Hi-Hat Open 122 Original Hi-Hat Open 123 Poprock Hi-Hat Open

124 Rock Hi-Hat Open 125 Seesion Hi-Hat Open 126 SpeedMetal Hi-Hat Open 127 ClassicDry Hi-Hat Open 128 Modern Hi-Hat Open 129 Jazz Hi-Hat Open 130 Blues Hi-Hat Open 131 Popular Hi-Hat Open 132 Fuse Hi-Hat Open 133 Dancehall Hi-Hat Open 134 Synthgaze Hi-Hat Open 135 Standard Hi-Hat Open 136 Funk Hi-Hat Close 137 Original Hi-Hat Close 138 Poprock Hi-Hat Close 139 Rock Hi-Hat Close 140 Seesion Hi-Hat Close 141 SpeedMetal Hi-Hat Close 142 ClassicDry Hi-Hat Close 143 Modern Hi-Hat Close 144 Jazz Hi-Hat Close 145 Blues Hi-Hat Close 146 Popular Hi-Hat Close 147 Fuse Hi-Hat Close 148 Dancehall Hi-Hat Close 149 Synthgaze Hi-Hat Close 150 Standard Hi-Hat Close 151 Funk Hi-Hat Pedal 152 Original Hi-Hat Pedal 153 Poprock Hi-Hat Pedal 154 Rock Hi-Hat Pedal 155 Seesion Hi-Hat Pedal 156 SpeedMetal Hi-Hat Pedal 157 ClassicDry Hi-Hat Pedal 158 Modern Hi-Hat Pedal 159 Jazz Hi-Hat Pedal 160 Blues Hi-Hat Pedal 161 Popular Hi-Hat Pedal 162 Fuse Hi-Hat Pedal 163 Dancehall Hi-Hat Pedal 164 Synthgaze Hi-Hat Pedal 165 Standard Hi-Hat Pedal

User defined drum kit

Demonstration song

PRODUCT MAINTENANCE

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

WARRANTY
Facebook:Global Musical Instruments After-service email:Globalmusicalinstrument@gmail.com Global Musical Instruments (Tianjin) Co., Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>