ELEGOO Centauri Carbon 3D Printer User Manual
- September 24, 2024
- ELEGOO
Table of Contents
Centauri Carbon 3D Printer
“`html
Specifications
Printer Specifications
- Operating Temperature Specifications
- Software Specifications
- Slicer Software: ELEGOO Slicer (recommended)
- Input File Format: STL, OBJ, 3MF, STP
- Output File Format: G-code
- Interface: USB Drive, WIFI
- Power Supply Specifications
- Input Power: 100-240V; 50/60Hz
- Rated Power: 1100W@220V, 350W@110V
- Physical Specifications
- Machine Size: 398404490mm
- Net Weight: 17.5kg
Product Usage Instructions
Machine Setup & Installation
-
Take out the foam and tool kit from the printer.
-
Unlock the heated bed and use a 2.0mm Allen wrench to remove
the three screws in the picture. -
Insert the ribbon cable into the port by pressing the terminal
as pictured. Make sure the gold contacts on the ribbon cable face
upwards. -
Install the screen into the corresponding slot on the printer
and push it down to lock it in place. -
Mount the spool holder onto the hole on the right side of the
machine and secure it by turning counterclockwise. -
Load the filament by inserting one end into the filament
detector and pushing it forward until it reaches its maximum
position.
Screen Operation Instruction
-
Language Selection
-
Follow the on-screen prompt to remove the three fixed screws of
the build platform. -
Ensure the collision block is correctly installed and click
Confirm. -
Ensure the printer chamber is free from foreign objects, then
click Confirm to proceed. -
Enter the initial self-check process. Vibrations and noises
during the self-check are normal.
FAQ
Q: What should I do if my filament gets stuck?
A: If your filament gets stuck, carefully remove it from the
detector and ensure there are no obstructions in the filament path.
You may need to manually feed or clear any blockages before
reloading the filament.
Q: How can I access customer support for technical issues?
A: For any technical issues not covered in the manual, please
contact our customer support team via email at 3dp@elegoo.com. Our
team is dedicated to providing assistance and resolving any
problems you encounter with your Centauri Carbon 3D Printer.
“`
Centauri Carbon 3D Printer
Centauri Carbon
User Manual
Please refer to the included USB drive for a setup and installation instructional video.
©
Thank you for choosing the ELEGOO Product!
This User Manual has been provided for your convenience. Please read this
instruction manual carefully before using your new printer, as the
precautions, information, and tips can better help you to avoid the risk of
incorrect product setup and usage.
For any questions or issues not covered in this manual, please contact us
directly via our customer support email address: 3dp@elegoo.com. The ELEGOO
team is always ready to provide you with quality service.
To provide you with the best product experience, in addition to this manual,
you can find supplemental information for the operation of your new printer
via: 1.The USB Drive: The digital files include a copy of this manual and all
required software. 2.The ELEGOO official website: www.elegoo.com for related
equipment operation, contact information, etc.
NOTES
1.Do not place the printer in highly vibrating or unstable environment, as
machine vibrations can affect print quality. 2.Do not touch the nozzle or
heated bed while the printer is in operation to avoid burns and personal
injury from high temperatures. 3.After printing, promptly utilize the residual
heat in the nozzle to effectively clean the filament residue using a suitable
tool. Avoid direct contact with the nozzle to prevent potential burns. 4.When
printing low-temperature filaments such as PLA and flexible filaments, please
remove the glass top cover. 5.We recommend using ELEGOO’s slicing software to
ensure the proper functioning of the machine and achieve optimal printing
results. 6.Perform regular maintenance on the printer by cleaning the machine
body with a dry cloth to remove dust and any sticky filament residue. Ensure
the printer is powered off before cleaning. 7.Be cautious of the machine’s
high-speed moving parts to avoid any potential pinch hazards. 8.The Z-axis of
the machine utilizes lead screws for its moving parts. Apply lubricating oil
as needed to ensure smooth movement. 9.Children must be supervised by adults
when using the machine to avoid personal injury. 10.In case of an emergency,
directly turn off the power. 11.Ensure the machine is properly grounded for
safe operation. Failure to properly ground or neglecting to ground the machine
can increase the risk of electrical leakage. 12.If the machine is not in use
for an extended period, please turn off the power and unplug the power cord.
Contents
Machine Parameters
Component Introduction
Accessory Specification
Machine Setup & Installation
Screen Operation Instruction
First Print
Filament Replacement
Slicing Software
LAN (Network) Printing
Mainboard Circuit Wiring Diagram
Machine Parameters
Printer Specifications
Printer Type: FDM (Fused Deposition Modeling) Maximum Build Volume:
256256256(mm) Print Precision: ±0.1mm Nozzle Diameter: Standard (0.4mm)
Print Speed: 500mm/s Ambient Environment Temperature: 5°C~40°C
Operating Temperature Specifications
Maximum Temperature of Nozzle: 300°C Maximum Temperature of Heated Bed: 110°C
Software Specifications
Slicer Software: ELEGOO Slicer (recommended) Input File Format: STL, OBJ, 3MF,
STP Output File Format: G-code Interface: USB Drive, WIFI
Power Supply Specifications
Input Power: 100-240V; 50/60Hz Rated Power: 1100W@220V 350W@110V
Physical Specifications
Machine Size: 398404490mm Net Weight: 17.5kg
Component Introduction
Auxiliary Part Cooling Fan
Printhead Chamber Camera
USB Drive Port
Filament Inlet Air Filter
Excess Chute
Power Socket
Centauri Carbon
Filament Detection Sensor (Filament Detector)
Filament Spool Holder
Touch Screen
Accessory Specification
óóýý
Aùý
Filament Sample
~ýù
ó ~
ýªýó
dýýùªýó
óýùý
%ý
Öý^ý ÖýAýÖòýù óÖýÖùý ^ýªý
Centauri Carbon 3D Printer
Centauri Carbon
User Manual
Please refer to the included USB drive for a setup and installation instructional video.
©
ýÖÖ
Machine Setup & Installation
Centauri Carbon
Centauri Carbon
Scan to access tutorials
1.Take out the foam and tool kit from the printer.
2.Unlock the heated bed and use a 2.0mm Allen wrench to remove the three screws in the picture.
3.Insert the ribbon cable into the port by pressing the terminal as pictured. Make sure the gold contacts on the ribbon cable face upwards.
Machine Setup & Installation
4.Install the screen into the corresponding slot on the printer and push it down to lock it in place.
5.Mount the spool holder onto the hole on the right side of the machine and secure it by turning counterclockwise.
Centauri Carbon
6.Load the filament by inserting one end into the filament detector and pushing it forward until it reaches its maximum position.
Screen Operation Instruction
1.Language Selection
2.Follow the on-screen prompt to remove the three fixed screws of the build platform.
3.Ensure the collision block is correctly installed and click “Confirm.”
4.Ensure the printer chamber is free from foreign objects, then click “Confirm” to proceed.
óýýdýÖDó
5.Enter the initial self-check process. Vibrations and noises during the self- check are normal.
6.Do not tap or shake the machine during the self-check process to avoid error prompts.
Important note: If you have disassembled machine components such as the nozzle
assembly or build platform, make sure to re-level the platform before
printing.
7.Self- check completed. Click “Confirm” to proceed.
First Print
óiýýýýýÖý ýÖòýýýÖýýÖýý~V ªÖýýýÖýýÖóýýÖýýóói ýýÖýùýÖýÖýùýý
2.Click – Local to select a model for test printing.
3.If the adhesion of the build plate decreases after prolonged use,
you can apply solid glue or use platform adhesive spray to
enhance the first-layer adhesion of the model, or replace the
build plate.
4.After the printed model cools down, detach the flexible build plate together with the model from the device. Bend the plate slightly to separate the model from it (avoid overbending to prevent deformation).
;ÖýýÖóýý
1.Click and switch to the Extruder option. Click “Unload” and wait for the machine to complete the unloading process.
2.After unloading is complete, press the pneumatic connector above the printhead to detach the filament guide tube. Extract the old filament from the tube and replace it with a new one.
Centauri Carbon
3.Load the filament by inserting one end into the filament detector and pushing it forward until it reaches its maximum position.
4.Click “Load” and wait for the nozzle to heat up. Once the nozzle reaches the preset temperature (e.g., 220 for PLA), it will start the filament loading process.
Slicing Software
The included USB drive contains slicing software for installation and use. *
Select your printer model before starting the slicing process.
Slicing Software
1.Importing model for slicing: You can simply drag and drop the model file
into the slicing software or click “File” in the top left corner and select
“Import.” 2.Exporting G-code file: You can use the web interface to send the
generated G-code file directly to the printer for online printing or save it
to a USB drive for offline printing.
LAN (Network) Printing
1.The device supports Wi-Fi connection. Go to the “Network” interface,
establish a successful connection, and check the IP address on the screen
(refer to the image on the right). 2.Connect your computer and printer to the
same local area network (LAN). Open your browser and enter the printer’s IP
address in the address bar to access the backend management. Utilize the web
interface to monitor the printing progress and pause/stop the print as needed.
*Upload G-code files for printing.
Mainboard Circuit Wiring Diagram
ýDýÖóý©DóòýùùýóóýóÖóý ýýÖùýóýÖÖýùÖÖý
Filament Detector
¸
°
X-Axis
24V Power
Motor Input Interface
Chamber Temperature
Chamber Camera
Camera Communication Port
Type-C Interface (24V)
Screen Ribbon Cable Interface
AC Power Output
V^
USB Drive Port
AC Power Input ^V
Auxiliary Part Cooling Fan
Case Fan
Leveling Module Heated Bed Temperature
Heated Bed Control Interface
Mainboard Fan
Z-Axis Optical Limit Switch
Heated Bed Control Signal
After-sales service registration card
Date of purchase: Place of purchase: Printer: S/N: Fault description:
Öó ùùý ~ýòý
Centauri Carbon
ELEGOO official website: www.elegoo.com Happy Printing!
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>