Ningyuanda v720 Mini Camera App User Guide

Ningyuanda v720 Mini Camera App

Product Information

Specifications

• Model: v720
• Compatibility: Mobile phones with V720 app support
• Wireless Connectivity: WiFi
• Regulatory Compliance: FCC Part 15

Product Usage Instructions

Client Downloading
Please follow the steps below to download and install the v720 app:

1. Scan the lower QR code or search for V720 in the mobile phone application store.
2. Download and install the v720 app on your mobile device.

Add Device
To add the device to the v720 app, follow these steps:

1. Open the v720 app and click on the “+” icon in the upper right corner.
2. Select or enter the WiFi account and password for the device.
3. Follow the on-screen instructions to turn on and reset the device. The blue indicator should flash quickly.
4. Wait for the device to be successfully bound, indicated by a steady blue light.

Note: Ensure proper network connection and device functionality during the binding process.

AP Mode
To connect in AP mode, follow these steps:

1. Turn on WiFi on your mobile phone and connect to the WiFi network named “hoNtsApXo_0”.

Matters Needing Attention

Warning: This device complies with FCC Part 15 rules. Please ensure no harmful interference is caused.

RF Exposure Statement: Maintain a minimum distance of 20cm between the device and your body for compliance with FCC RF Exposure guidelines.

FAQ

• Q: What should I do if the device does not bind successfully?
  A: Make sure the network is unblocked, the camera is turned on normally, and follow the binding process again.

• Q: Can I use the device with any mobile phone?
  A: The device is compatible with mobile phones that support the v720 app.

Thank you for purchasing this product. Please read this manual carefully before using it and keep it in a safe place.

Client downloading

Please scan the lower QR code, download and install the “v720” app, or search for “V720” in the mobile phone application store to download and  install.

Add device

1. Open the “v7201” app and click “+” in the upper right corner of the page to start the binding process.
2. Select or enter the WiFi account you want to use and fill in the password.
3. Turn on and the blue indicator flashes quickly. At this time,
4. Wait until the device is bound successfully, and then the blue indicator is always on. (Tip: when you are connecting, plese ensure that the network is unblocked,and the camera is turned on normally, the blue indicator flashes quickly at this time. After the connection is successful, the indicator light is steady blue.)

AP mode

1. Mobile phone turn on the WIFI and connect to the WIFI hotspo0″NAX_”.
2. Return to the “v720” app and refresh dropdownlist, when the device displays that means the short-range mode connection is successful.

Matters needing attention

1. The applicable working temperature of this product is -10°C~50°C. Please do not use this product in an environment where the temperature is too high or too low.
2. This product is a precision electronic product. Please do not use this product in an environment where is excessively wet or may cause water to enter the product.
3. To better use this product，please avoid the front and side of the lens close to the glass, white wall and other reflective objects, in order to avoid the picture is bright near and dark in the distance or whitish.
4. Please ensure that this product is installed within the range of Wi-Fi signal coverage, and placed as far as possible in a location with better Wi-Fi signal, and try to install it far away from the microwave oven or other locations that may affect the signal.

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE : This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>