Temu BW905 Mini Karaoke Speaker User Manual
- September 23, 2024
- TEMU
Table of Contents
BW905 Mini Karaoke Speaker
“`html
Specifications:
-
Model: BW905 (Wireless Name)
-
Output power: 15W (Max)
-
Charging power: TYPE-C 5V 1A
-
Wireless Range: 20 meters, version 5.4
-
Battery: Lithium battery (refer to the bottom of the
speaker) -
Input audio: Bluetooth/TF/AUX/FM
-
Lighting Mode: RGB LED color change
-
Frequency Response: 90Hz-18KHz
Product Usage Instructions:
Power and Volume Control:
– Tap the LED to change to the last track. Long press to turn
down the volume.
– Long press to turn on and off the speaker. Short press to
pause and play music.
– Long press to turn off the RGB light. Short press to change
the light color.
– Tap to change to the next track. Long press to turn up the
volume.
Audio Input Modes:
– Wireless: Make sure the device is within 20 meters range.
Press and hold for 2 seconds to activate TWS.
– FM Radio: Select FM mode on the device.
– TF Card: Insert a TF card with MP3 format for automatic
recognition and playback.
– AUX: Connect via an AUX cable to play music.
Charging and Battery Information:
– Use TYPE-C charging with a maximum input power of 5V 1A.
– Charging indicator lights on when charging and goes off when
fully charged.
Special Reminders:
– Avoid pressing the bass vibration film at the bottom too hard
for a long time to prevent damage.
– Prolonged low power conditions for more than 6 months without
charging may damage the battery. Keep the battery full if not in
use for an extended period.
Frequently Asked Questions:
Q: Unable to turn on?
A: Check the battery status and charging indicator when
charging.
Q: Wireless connection issues?
A: Ensure the device is within 20 meters range and check the
mode settings.
Q: Noise interference?
A: Check for signal interference from nearby devices.
“`
LED
/
20
/
:Tap to change to last track, and long press it to turn down thevolume. :
Audio input mode: Wireless /FM radio /TF card /AUX. (Note: Press and
holdfor 2 seconds to activate TWS) : Long press to turn on and off the
speaker, and short press to pause andplay. : Long press to turn off the RGB
light, and short press to change the light. : Tap to change to next track, and
long press to turn up the volume.
Features
Model:BW905(Wireless Name)
Output power:15W(Max)
Charging power:TYPE-C 5V 1A
Wireless:20 meters, version 5.4
Battery :Lithium battery (refer to the bottom of the speaker)
Input audio:Bluetooth/TF/AUX/FM Lighting Mode: RGB LED color change
Frequency:90Hz-18KHz
Questions and Answer:
Q:Unable to turn on? A:Please check the battery, and check if the charging
indicator is on when charging. Q:Wireless to connect? A:Please check whether
the M button is in the proper mode and confirm the device range(less than 20
meters). Q:Noise? A: Check whether there is signal interference from other
devices in the near distance.
: TF Card Input: automatically recognize Mp3 format and play if you insert a
TF card. : Aux Output: use AUX cable to play music. : Power Input: type-c
charging, accept input maximum power voltage 5V 1A. charging indicator lights
on when charging and goes off when full charged. (Note: voltage support 5V,
current 1A~10A)
Special reminder: The bass vibration film at the bottom of the stereo should
not be pressed toohard for a long time to avoid damage. Low power conditions
for longer than 6 months without
charging may damagethe battery. Please try to keep the battery full if not use
for a long time.
2
2
FCC Warning Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.