BOXIN BXD04 Car Navigation Owner’s Manual

BOXIN BXD04 Car Navigation

Specifications

• Model: Car navigation V5-4
• DSP
• Rear Camera included
• Multimedia:
  • Music Player
  • Video Player
• Phone Link:
  • Phone Link (method 1)
  • Phone Link (method 2)

Product Usage Instructions

UI Switching

1. Press the Setup icon and open the button.
2. Select General.
3. Select Navigation split screen.
4. Press the Navigation icon.
5. Press the Split screen icon.

FAQ
Question: What should I do if the device does not power on?
Answer: Make sure the device is properly connected to a power source and try resetting it by pressing the reset button if available. If the issue persists, contact customer support for further assistance.

Instructions for use

Thank you for purchasing this product, please read this manual carefully before use to ensure that you can use the machine correctly. After reading the instructions, please keep it for future inspection.

Caveat

To prevent damage to the machine and to use the system safely, please

• To prevent short circuits, do not omit metal objects (coins or other metals) inside the machine.
• Do not install the unit in a way that hinders the driver’s sight or affects the driver’s operation. When you drive, please do not pay attention. In the system, do not watch the screen for a long time.
• The machine consists of high-precision components, and should avoid a strong impact, not to unauthorized removal of the cover or adjust the parts, for maintenance, please go to a nearby professional service center consultation.

Before use

• When you purchase optional accessories or make related system settings, please check with the dealer whether they match the machine.
• You can select your favorite language display in the language setup menu. For more information, see Language Settings (page 4 of the manual)

Protect the display

• Protect the display from damage, do not use a ballpoint pen or sharp tool to touch the display.
• When the machine panel or display screen is dirty, wipe it with a soft cloth and a mild
• You can not use hard cloth or alcohol and other corrosive thinner wipe the display or panel, so as to avoid the display or panel damage, blurred, the screen disappeared and so on.
• Please follow the instructions to use this machine, the damage caused by illegal operation is not covered by the warranty.

note
The machine display screen you see may be inconsistent with the picture of the manual, which is due to the unannounced software upgrade and update, does not affect the normal use. Some function (DVD, color LED, TV, etc.) is optional. The device which you purchase may not includes all the functions that this manual listed.

Troubleshooting

Basic operation

Definition of the keys

Note: This table summarizes the definition of most of the panel buttons, but not every model contains all the keys, someThe model contains only a small number of keys, which does not affect the use, if you have questions, please consult the dealer.

Open the system
Press the power button second, to activate the system.

Turn off the system
When the system is on, press and hold the power button for second to turn off the system.

Operating instructions for main interface

Main interface

1. Press the button , The interface will return to the default main interface.
2. Slide to the left or right interface as you want.
3. .Press the button car interface will come out. Press the button it will display the interface of system applications and third-party applications.
4. long press , Go to the small window interface, Can clear the background running programs Press button B , which can replace the main interface wallpaper

Move or Remove the icons

1. Change the icon option: press and hold the icon, it will pop up and become larger. This time the icon is movable and you can place it wherever you want.
2. View APP information: press and hold the activated icon, drag the icon to
3. Delete icon: press and hold the activated icon, drag the icon

Add shortcuts for initial master interfaces 1 and 2

1.  Press
2. Press and hold the icon to wait for the pop-up panel of the main interface 1 and 2 to pop up.
3. Drag the icon to an empty position, and if you drag to other icons, it will form a folder.

Radio Operation

Radio Basic Operation

1. Select the FM1, FM2, FM3, AM1 or AM2 band

2.  Frequency display
   switches to previous frequency manually.
   switches to next frequency manually.

3. Displays the preset channel list, hold the key (P1-P6) to store the current broadcast frequency.

4.  Multi function menu
   Tunes in a station with good reception automatically.
   Short touch for non stop seek tuning, touch again to cancel.
   Long touch for switching the preset channels, long touch again to cancel.
   Change between Locate and DX mode.
   Switch frequency band.
   Touch to active the RDS function.
   EQ and FAB setting, pls see the EQ and FAB setting below.

5.  Mono and DX
   Displays LOC or DX. Mono
   Displays Mono or Stereo, decided by the radio IC.

RDS

Stores Channel

1. Press the P1 key and hold to store the current channel to P1 key.
2. Press the P2 key and hold, then store the current channel to P2 key. If P3, then to P3key etc.

Bluetooth Control

Connecting
Registing your Bluetooth device

1. Active the Bluetooth on your phone
2.  Touch search to search the Bluetooth waiting for pairing
3. Touch the Bluetooth Device name ( jj or ther ) for connecting
4. Type the pin code (default code is 0000 or 1234) on your phone

Connecting a registered Bluetooth manually

1. Active the Bluetooth on your phone
2. Touch the to see the registered Bluetooth device list
3. Kick the box of the Bluetooth device name to connect
4. Type the pin code (default code is 0000 or 1234) on your phone

Delete a registered device

1.  Touch the to see the registered Bluetooth device list
2. Cross the box of the device name
3. Touch the cross, and it tips “Do you want to unpair the Device?”
4. Touch OK, the device deleted

Hands-Free Call

Phone call

1. Touch the type the phone number, and click , phone call success as screen below, Cancel the phone call by touch the , and touch thellto switch to speaker.

2. Phone book
   Touch the to enter the Bluetooth phone book interface, and follow the to download the phone book.

3. Phone call record

4. Device connection

5. Bluetooth Setup

6. Touch the Bluetooth to change the Name

7. Sync phonebook

Playing Bluetooth Audio Device
Click into BT music and play music of the device connected by BT

Rear Camera

Note: The Reverse cable (pink color) of the power cable must be connected to the car’s parking or reversing wire, then parking or reversing, the parking screen will automatically display.

Note : For Car Navigation for Volkswagen (VW) with CANBUS, the video signal cable (5 red color) must be connected to the Reverse cable of the power cables. for other models no need to connect video signal cable to reverse cable.

Multimedia

Video Player

Music Player

Note: the Music Player and the Video player works when the USB or the SD card is connected. And there are music or video in the USB or SD card.

Phone Link(method 1)

1.  Touch the to enter the PhoneLink interface, Touch the Instructions.
2. Turn on the Phonelink item on head unit.Confim the Phone’s WIFI is open.
3. Connect your phone to the head unit’s BT , after done,it will show a windows on the BT page ,it said use the Carplay function or not ,please dick yes and wait for connect
4. Turn off the headunit hot-spot the wireless carplay will be disconnect.
   Note: Note:After first connection,your phone need to enter the BT device connection page, Turn on and off the carply item ,then will finish connection.

Wire carplay function
Connect the Iphone to the headunit by cable (OTG port) ,Click the “Use carplay” on your iPhone,then will enter the Carplay page.

Wire Android
Autofunction Connect the Android phone to the headunit by cable (OTG port) ,then will enter the Android Auto page.

Phone Link(method 2)

1.  Touch the to enter the PhoneLink interface, Touch the Instructions.
2. Turn on the Phonelink item on headunit.Confim the Phone’s WIFI is open.
3. After the head unit connected with BT ,on phone home page ,click the Setting item →General→find the Carplay item and enter In this page find the head unit’s name and connect it. Then will show a window on phone, please click the use Carplay item and wait for it finish connect.
4. Turn off the headunit hot-spot ,the wireless carplay will be disconnect.
   Note: Note:After first connection,your phone need to enter the BT device connection page, Turn on and off the carply item then will finish connection.

Wire carplay function
Connect the Iphone to the head unit by cable (OTG port), Click the “Use carplay” on your Iphone ,then will enter the Carplay page.

Wire Android
Auto function Connect the Android phone to the headunit by cable (OTG port) ,then will enter the Android Auto page.

DSP Setting

1. EQ interface, you can choose sound effects, such as Flat, Pop, Rock, etc. 2. Curve interface,you can choose custom sound curve.
2. FAB interface, You can set the sound balance.
3. Delay interface, You can set the stereo and sound field delay.

Set up

Video

• Touch I Video 1. if necessary.
  • Parking – In Parking “Off” mode, the screen will display Warning information if you play video.
  • The warning screen will prevent the driver from watching videos while the vehicle is in motion.

General

• Select an option to access/setup.

Wi-Fi Setup

• Tu rnontheWi-Fi and search the available networks.
• Colant a hotennt to connect

Bluetooth settings

• Manage Bluetooth devices.

Language Setup

Source VolumeLevel

• Set the Voluem Level of each Source.

Navigator

• Select a Navigation source from the available list.

ColorLED

• Set the color of the Keys on the front display.

Car Logo

• Choose the LOGO you wan ox.

Steering Wheel Control Setup

• Select [ SWC] in the Settings menu to enter SWC setting menu.
• Select a function icon on the screen
• Long press a steering wheel button
• Repeat step 1 and 2 until all the settings are done.
• Touch [ Save and Exit ] after all buttons are set
• To reset the programming, touch [ Reset ].

Factory

• Acess Factory configuration.
  Default Password: 6666

Original Car

• View and manage CANBUS Settinas. Default Password:0000

Android Settings

• View and manage the Android Settings.

Upgrade & Reset

• Upgrade the software & Reset the default settings.

System Info

• View Svstem Informations.

Ul switching

• Enter Settings, open General, and click Ul.

Interface definition

• A•20Din CIM card audin and viden socket.
• R-12Din 260 nanoramic interfac
• C:8Pin Plug-in protocol, audio output
• D:4Pin USB1 socket(Optional)
• E:6Pin USB2 socket
• F:10Pin Reversing, handbrake, WIFI/BT antenna socket

Split screen

Wiring Diagram

Diagram of power cable and RCA Cable

Note: only work within DC10. 5V-16V power FM 87.5~108.0MHz AM 522KHz~1620KHz Speaker prohibit grounding!

Power Cable Diagram

[2] RCA output socket

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>