styletech STY-BS50 Portable Speaker User Guide

: September 23, 2024
: Styletech

Table of Contents

styletech STY-BS50 Portable Speaker
Product Information
Product Usage Instructions
FAQs
What’s In The Box
Product Specification
CONTROLS
SETUP
Legal information
Warranty
Important Safeguards & Precautions
Battery Core
FCC STATEMENT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

styletech STY-BS50 Portable Speaker

Product Information

Specifications:

Play/Pause: Single press
Power: Press and hold to power on/off
LED Lights: Single press for up to 11 lighting effects. To turn off the LED lighting, press and hold the button
TF Memory Card: Play MP3/WAV format
Pen Drive: Play MP3/WAV format
USB C Connection: Use the provided cable to charge the battery or power the speaker
Plus Symbol: Single press for next track. Press and hold to increase the volume
Minus Symbol: Single press for the previous track. Press and hold to decrease the volume

Product Usage Instructions

Bluetooth Connection:

Press and hold the power button until the speaker confirms it is in Bluetooth mode.
Access Bluetooth settings on your device and select “STY-8550”.
The speaker will confirm the connection with your device.

AUX Connection:

Connect the speaker to a device using a 3.5mm – 3.5mm cable (sold separately).
Insert one end into the compatible device and the other end into the AUX port on the speaker (#6).
The connection should be instant and ready for use.

Charging:

Using the provided cable, insert the smaller end into the USB C port on the speaker and the larger end into a free USB A port.
A red LED next to the AUX port will indicate charging, and it will turn off when fully charged.

LED Lights Adjustment:
To adjust the LED lights, press the light button in single increments. Note that the battery lasts longer with the LED lights turned off.

FAQs

Q: How do I switch between AUX and Bluetooth modes?

A: Simply press the power button once to switch between AUX and Bluetooth modes.

Q: How can I answer calls while listening to music?

A: You can answer calls by pressing the Play/Pause button on the speaker. To end the call, press the same button.

Q: How do I adjust the volume and tracks?

A: Use the Plus Symbol for the next track and volume increase, and the Minus Symbol for the previous track and volume decrease. Single press for track change and hold for volume adjustment.

What’s In The Box

1x Mini Bluetooth Speaker
1x USB A-C Charging/Power Cable

Product Specification

Bluetooth: 5.3
Wireless working distance: 10m
SNR: (Signal to Noise Ration) ≥ 85db
Speaker Driver: Ø52mm
Frequency Response: 120Hz – 18KHz
Power: 49/5w
Battery: 3.7v/1200mAh
Charging: 5v/500mA
Unit Size: 100mm x 101mm x 122.5mm
Unit Weight: 294g

CONTROLS

Play/Pause: Single press
Power: Press and hold to power on/off
LED Lights: Single press for up to 11 lighting effects. To turn off the LED lighting, press and hold the button
TF Memory Card: Play MP3/WAV format
USB Pen Drive: Play MP3/WAV format
AUX Connection: Ploy audio using a 3.5mm – 3.5m jack cable, connected to a compatible device. Cobe not included
USB C Connection: Use the provided cable to charge the battery or power the speaker
+ Plus Symbol: Single press for next track. Press and hold to increase the volume
Minus Symbol: Single press for the previous track. Press and hold to decrease volume.

SETUP

Bluetooth

Press and hold the power button. The speaker will confirm you are in Bluetooth mode.
Go to Bluetooth settings on your chosen device and select – STY-BS50
The speaker will confirm that your device is connected.

If you receive a call whilst music is playing you can answer by pressing the Play/Pause button on your speaker, to end the call simply press the same button.

AUX Connection

To connect the speaker to a chosen device using a 3.5mm – 3.5mm cable (sold separately) insert one end into a compatible device and the other end into the AUX port (#6) on the speaker. This should connect instantly and be ready for use.

To switch between AUX and Bluetooth, just press the power button once.

Charging
Using the provided cable, insert the smaller end into the USB C port on the speaker and the larger end into a free USB A port.

The speaker will signal its charging with a circular LED glowing red next to the AUX port (#6). When fully charged the light will turn off.
To power off – press and hold the power button
To adjust the LED lights, press the light button in single increments
Please Note: The battery lasts much longer with the LED lights turned off.

Legal information

Please keep this instruction manual for future reference. If you require any help or assistance please contact help@abptech.co.uk.

Warranty

This product is guaranteed for one year from my date of purchase. During this period it is a defect due to faulty materials, or workmanship the retailer from whom you purchased it will replace it with the same or a similar model on production of your purchase receipt or proof of purchase. This guarantee does not cover defects arising from accidental damage, misuse, or wear and tear, and is available only to the original purchaser of the product. This does not affect your statutory rights.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Precautions

Ensure that the volume control is set to the minimum level before connecting the speaker to
Ser sys volume control to its minimum level then slowly increase until you reach your desired volume level
Listening to your speaker at its maximum level may cause damage to both the speaker and your ears
Long-term exposure to loud music or other sounds may cause hearing damage. It is best to avoid very high volume levels, especially for extended periods

Important Safeguards & Precautions

Never exposed to direct sunlight or wet weather conditions
Do not expose the unit to sploshing, dripping, rain, or moisture. Do not immerse in liquid
Do not expose to dust, high humidity, high temperatures, or mechanical shock
Avoid any unnecessary strain on the cable
Do not use it if the equipment is damaged
Do not disassemble; there are no serviceable parts inside
For external cleaning, use a soft, clean, damp cloth only. The use of detergents may damage the cabinet finish and leak inside.

Battery Core

The speaker is only to be charged under adult supervision
Once the speaker is fully charged disconnect the USB charging cable
Do not attempt to change any other battery pack or device using the USB charging cable
Do not leave the speaker on charge for longer than 6 hours
We do not recommend leaving the speaker on charge overnight or while unattended
Never dispose of batteries in a fire, as this can cause them to explode
Do not attempt to remove the speaker’s built-in battery pack, it is not replaceable

Recycling
Where you see the reman electric predator broody so bad series disposing of of. as general household waste in the EU or Turkey. To ensure the correct waste treatment of the product and battery, please dispose of them under any applicable local laws or requirements for the disposal of electrical equipment/bombers. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste.

The recycling and processing of Waste Electrical and Electronic Equipment will make a significant contribution towards helping protect the environment by reducing landfill waste. Not recommended for children under 6 years of age.

CE Marking of this symbol
indicates this product has been tested and is compliant with the EMC Directive of the European Union 2014/30/EU.

UK/CA Marking of this symbol
indicates this proud conforms to Electromagnetic Compatibility Regulations 2016 issued by the UK.

FCC STATEMENT

This dovice complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (4) this device may not cause harmful interference, ond (2) this device must accept any interference received, including inferference that may cause undesired operation.

This equipment has been tested and found to comply withthe limits for a Class 8 digital device. under part of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, ano can rodiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver:
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

Canadian ICES Statements
Canadian Department of Communications Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio-noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class 8 digital apparatus complies with Canadian ICES-003.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Not recommended for children under o years of age. Please retain this packaging for future reference. Due to the company’ spolicy of constant improvement and technical refinement, the company reserves the right to alter the specification. Actual products may differ from packaging imagery.