FISHER and PAYKEL OB60SMPTDB1 60CM Ovens and Companions Minimal User Guide

: September 21, 2024
: FISHER and PAYKEL

Table of Contents

OB60SMPTDB1 60CM Ovens and Companions Minimal
Specifications:
Product Usage Instructions:
Oven:
Steam Oven:
Combination Microwave Oven:
Built-in Coffee Maker:
Warming Drawer:
Vacuum Seal Drawer:

OB60SMPTDB1 60CM Ovens and Companions Minimal

“`html

Specifications:

Oven: OB60SMPTDB1, OB60SMPTDG1
Steam Oven: OS60SMTDB1, OS60SMTDG1, OS60NMTDB1, OS60NMTDG1
Combination Microwave Oven: OM60NMTDB1, OM60NMTDG1
Built-in Coffee Maker: EB60MSB1, EB60MSG1
Warming Drawer: WB60SMB1-SET, WB60SMG1-SET, WB60SMTB1-SET
Vacuum Seal Drawer: VB60SMB1-SET, VB60SMG1-SET

Product Usage Instructions:

Oven:

Instructions for using the oven…

Steam Oven:

Instructions for using the steam oven…

Combination Microwave Oven:

Instructions for using the combination microwave oven…

Built-in Coffee Maker:

Instructions for using the built-in coffee maker…

Warming Drawer:

Instructions for using the warming drawer…

Vacuum Seal Drawer:

Instructions for using the vacuum seal drawer…

FAQ:

Q: Are these products available in all markets?

A: The models shown in the guide may not be available in all
markets and are subject to change. Please check availability in
your region.

Q: Can this guide be used for installation?

A: This guide should not be used as installation guidance.
Specific installation instructions will be available on the Fisher
& Paykel website.

“`

60CM OVENS AND COMPANIONS MINIMAL
PLANNING GUIDE
OVEN | OB60SMPTDB1, OB60SMPTDG1 STEAM OVEN | OS60SMTDB1, OS60SMTDG1, OS60NMTDB1, OS60NMTDG1 COMBINATION MICROWAVE OVEN | OM60NMTDB1, OM60NMTDG1 BUILT-IN COFFEE MAKER | EB60MSB1, EB60MSG1 WARMING DRAWER | WB60SMB1-SET, WB60SMG1-SET, WB60SMTB1-SET VACUUM SEAL DRAWER | VB60SMB1-SET, VB60SMG1-SET

PLANNING GUIDE | OVENS AND COMPANIONS, 60CM
This comprehensive Planning Guide provides you with the framework and tools to achieve your desired design outcome with Fisher & Paykel appliances. In this guide, you will find a range of conceptual, detailed and dimensional product information to bring your ideas to life and create spaces that truly reflect your vision.

CONTENTS

High-level product information

CONCEPT DESIGN i

for the initial stages of

PAG E

conceptualising and refining

Design Choices

your design.

Ovens and Companions – ALL MODELS

4

Configurations – ALL MODELS

5

Overview – ALL MODELS

6

Specification Guides

Oven

8

Combination Steam Oven

9

Combination Steam Oven

10

Combination Microwave Oven

11

Built-in Coffee Maker

12

Warming Drawer, Tall

13

Warming Drawer

14

Vacuum Seal Drawer

15

Dimensions – ALL MODELS

16

Power, Weight and Capacity – ALL MODELS

17

DEVELOPED AND DETAILED DESIGN i
Data Sheets Oven Combination Steam Oven Combination Steam Oven Combination Microwave Oven Built-in Coffee Maker Warming Drawer, Tall Warming Drawer Vacuum Seal Drawer

Detailed information, including

product specs and dimensions,

PAG E

DEVELOPED AND DETAILED DESIGN

to support you in the advanced

design stages.

Planning Considerations

19

Cabinetry Preparation – ALL MODELS

20

Configurations – ALL MODELS

21

Oven

22

Combination Steam Oven

23

Combination Steam Oven

24

Combination Microwave Oven

25

Built-in Coffee Maker

26

Warming Drawer, Tall

Warming Drawer

Vacuum Seal Drawer

PAG E
28 29 30 31 32 33 34 35 36 37

Services

Power Cord Length and Location – COMPANIONS

39

Power Cord Length and Location – OVENS

40

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

PAGE 2

DESIGN CHOICES

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

PAGE 3

DESIGN CHOICES | OVENS AND COMPANIONS, 60CM

OVENS

STEAM OVENS

MICROWAVES

COFFEE MAKER

DRAWERS

ALL MODELS
INSTALLATION OPTIONS

COLOUR
Grey Black Glass Glass

DIAL AND HANDLE FAMILY HANDLELESS FAMILY

*Note: Warming Drawer Tall only available in Black Glass finish

Installation in wall

Installation under-bench

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 4

DESIGN CHOICES | CONFIGURATIONS, 60CM

STACKED INSTALLATION
Stack Height 1060mm

ROW INSTALLATION
Stack Height 600mm

Stack Height 1210mm

Stack Height 600mm

GRID INSTALLATION
Stack Height 1060mm

ALL MODELS
CONSIDERATIONS
Different configurations possible, considerations are height,
colour, dial and handle or handleless.

Stack Height 1200mm

Note: Stack Height is overall product height with minimum clearances above appliance front panel to upper cabinetry front panel or appliance.

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 5

DESIGN CHOICES | OVERVIEW, 60CM
FRONT ELEVATION

ALL MODELS

SIDE ELEVATION

VACUUM SEAL DRAWER

Series
Model Codes Black Glass Model Codes Grey Glass
Interface
Overall Product Heights
Front Panel Thickness

Series 9 VB60SMB1-SET VB60SMG1-SET
140mm 20mm

WARMING DRAWER Series 9
WB60SMB1-SET WB60SMG1-SET
140mm 20mm

WARMING DRAWER TALL Series 9

BUILT-IN COFFEE MAKER

COMBINATION MICROWAVE OVEN

Series 9

COMBINATION STEAM OVEN
Series 9

WB60SMTB1-SET

EB60MSB1

OM60NMTDB1

OS60NMTDB1

–

EB60MSG1

OM60NMTDG1

OS60NMTDG1

–

4.3″ Touchscreen

5″ Touchscreen

290mm

458mm

20mm

COMBINATION STEAM OVEN Series 11
OS60SMTDB1 OS60SMTDG1 5″ Touchscreen
598mm 20mm

OVEN Series 9 OB60SMPTDB1 OB60SMPTDG1 5″ Touchscreen 598mm 20mm

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 6

SPECIFICATION GUIDE

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

PAGE 7

SPECIFICATION GUIDE | OVEN, 60CM
OB60SMPTDB1

OB60SMPTDB1 | OB60SMPTDG1

OVERVIEW Designed to fit seamlessly into any kitchen with Minimal styling, this 60cm oven features a generous 85L total capacity. Achieve perfect results with 16 oven functions, plus a Wireless Temperature Sensor for monitoring cooking in real time. Beautiful to use, the large 5″ touchscreen interface features simple and intuitive guided cooking, while Pyrolytic self-cleaning breaks down grime and grease, to keep the oven pristine for the next use.
sold separately
PRODUCTS OB60SMPTDB1 – Black Glass Oven, 60cm, 16 Function, Self-cleaning
OB60SMPTDG1 – Grey Glass Oven, 60cm, 16 Function, Self-cleaning
SERIES & STYLE
Series 9 Minimal

FEATURES 1 Minimal style, designed to fit flush with cabinetry
2 Generous 85L total capacity with six shelf positions
3 Intuitive, large 5″ touchscreen display with illuminated dial
4 16 oven functions including Air fry, Fan Bake, and Roast 5 Pyrolytic self- cleaning function breaks down food residue
for an easy clean 6 Includes a Wired Temperature Sensor for real-time
monitoring of cooking temperatures 7 Guided touchscreen cooking makes it simple to cook by
food, function or recipe 8 Moisture control and even heat distribution thanks to
ActiveVent and AeroTechTM technology 9 Automatic rapid pre-heat function for added convenience
“0 Soft open and close door
“1 Wi-Fi/Connected capability through the SmartHQTM app

OB60SMPTDG1

ACCESSORIES 1 Full Extension Sliding Shelf 2 Grill Rack 3 Smokeless Grill Tray 4 Roasting Dish 5 Step Down Wire Shelf

ACCESORIES 5 Wired Temperature Sensor 6 Flat Brushed Baking Tray 7 Pyrolytic Proof Shelf Runners

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 8

SPECIFICATION GUIDE | COMBINATION STEAM OVEN, 60CM

OS60SMTDB1 | OS60SMTDG1

OS60SMTDB1

OVERVIEW
Experience the precise control, repeatability and certainty of steam with our flagship Combination Steam Oven. Harnessing all the advantages of AeroTechTM technology, the oven features 23 functions, including steam-only, convection- only, or a combination of both. A Wireless Temperature Sensor precisely monitors food in real time, while the intuitive interface and dial offer simple guided cooking, helping to ensure perfect results.
sold separately
PRODUCTS OS60SMTDB1 – Black Glass Combination Steam Oven, 60cm, 23 Function
OS60SMTDG1 – Grey Glass Combination Steam Oven, 60cm, 23 Function

FEATURES 1 Minimal style, designed to fit flush with cabinetry
2 Generous 85L total capacity with six shelf positions
3 Intuitive, large 5” touchscreen display with illuminated dial
4 23 oven functions including six steam-only functions
5 Moisture control and even heat distribution thanks to ActiveVent and AeroTechTM technology
6 Guided touchscreen cooking makes it simple to cook by food, function or recipe
7 Includes a Wired Temperature Sensor for real-time monitoring of cooking temperatures
8 Water tank capacity of 1.5L
9 Wi-Fi/Connected capability through the SmartHQTM app

SERIES & STYLE
Series 11 Minimal

OS60SMTDG1

ACCESSORIES 1 Chromed Shelf Runners 2 2x Descale Solutions 3 Flat Brushed Baking Tray 4 2x Full Extension Sliding Shelves 5 Grill Rack 6 Large Steam Dish

ACCESORIES 7 Step Down Wire Shelf 8 Large Perforated Steam Dish 9 Small Perforated Steam Dish “0 Roasting Dish “1 Smokeless Grill Tray “2 Wired Temperature Sensor

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 9

SPECIFICATION GUIDE | COMBINATION STEAM OVEN, 60CM

OS60NMTDB1 | OS60NMTDG1

OS60NMTDB1 OS60NMTDG1, paired with Warming Drawer WB60SMG1-SET

OVERVIEW With timeless Minimal styling, the compact Combination Steam Oven is designed to fit seamlessly into any kitchen. It features 23 functions, including steam-only, convection-only, or a combination of both. Reduce the need for oils and fats with six standalone steam functions, perfect for creating flavourful and healthy restaurant-quality meals at home. Beautiful to use, the large 5″ touchscreen interface has simple and intuitive guided cooking, helping to ensure perfect results.
PRODUCTS OS60NMTDB1 – Black Glass Combination Steam Oven, 60cm, 23 Function OS60NMTDG1 – Grey Glass Combination Steam Oven, 60cm, 23 Function
SERIES & STYLE Series 9 Minimal

FEATURES 1 Minimal style, designed to fit flush with cabinetry
2 55L total capacity
3 Intuitive, large 5” touchscreen display with illuminated dial
4 23 oven functions, including six steam-only functions
5 Includes a Wired Temperature Sensor for real-time monitoring of cooking temperatures
6 Guided touchscreen cooking makes it simple to cook by food, function or recipe
7 Moisture control and even heat distribution thanks to ActiveVent and AeroTechTM technology
8 Motorised control panel reveals large 1.5L water tank
9 Wi-Fi/Connected capability through the SmartHQTM app
ACCESSORIES 1 Chromed Shelf Runners 2 Full Extension Sliding Shelf 3 2x Descale Solutions 4 Flat Brushed Baking Tray 5 Grill Rack 6 Large Steam Dish 7 Wire Shelf 8 Large Perf.orated Steam Dish 9 Small Perforated Steam Dish “0 Roasting Dish “1 Wired Temperature Sensor

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 10

SPECIFICATION GUIDE | COMBINATION MICROWAVE OVEN, 60CM

OM60NMTDB1 | OM60NMTDG1

OM60NMTDB1

OVERVIEW With timeless Minimal styling, the Combination Microwave Oven is designed to fit seamlessly into any kitchen. A flexible appliance that pairs the speed of microwave cooking with oven technology, which can crisp and brown as it cooks. Featuring 22 cooking functions on an intuitive touch display for easy programming of desired cooking mode and duration. A Wired Temperature Sensor monitors cooking in real time for complete control.
PRODUCTS OM60NMTDB1 – Black Glass Combination Microwave Oven, 60cm, 22 Function OM60NMTDG1 – Grey Glass Combination Microwave Oven, 60cm, 22 Function
SERIES & STYLE Series 9 Minimal

FEATURES
1 Minimal style, designed to fit flush with cabinetry
2 Compact size for smaller kitchens, and generous 49L capacity with 4 shelf positions to cook for everyday’s needs
3 Intuitive, large 5” touchscreen display with illuminated dial
4 The benefits of both microwave and convection oven cooking in one
5 22 cooking functions, including 14 traditional convection functions, 4 microwave-only functions, and 4 microwave combination functions
6 Guided touchscreen cooking makes it simple to cook by food and function
7 Includes a Wired Temperature Sensor for real-time monitoring of cooking temperatures
8 Inverter technology for fast and even heating, and quiet product operation
9 Wi-Fi/Connected capability through the SmartHQTM app

OM60NMTDG1

ACCESSORIES 1 Chromed Shelf Runners 2 Glass Tray 3 Step Down Wire Shelf 4 Wire Shelf 5 Wired Temperature Sensor 6 Grill Rack

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 11

SPECIFICATION GUIDE | BUILT-IN COFFEE MAKER, 60CM

EB60MSB1 | EB60MSG1

Built-in Coffee Maker EB60MSB1, paired with Warming Drawer WB60SMB1-SET Built- in Coffee Maker EB60MSG1, paired with Warming Drawer WB60SMG1-SET

OVERVIEW The Built-in Coffee Maker features a stylish finish and can be installed in multiple configurations to suit kitchen design and preference. With 13 beverage options, our Coffee Maker is designed to consistently pour delicious coffee from Flat White to Latte or Americano. Favourite coffee styles are memorised for a fast brew with the push of a button. A programmable timer turns the Coffee Maker on at the ideal time each day, while the conical burr grinder delivers a consistent grind for a perfect coffee.
PRODUCTS EB60MSB1 – Black Glass Built-in Coffee Maker, 60cm
EB60MSG1 – Grey Glass Built-in Coffee Maker, 60cm
ACCESSORIES 1 Thermal milk jug (0.5L) 2 Water filter 3 Coffee spoon 4 Extractable steam outlet 5 Descaling agent bottle 6 Telescopic runners

FEATURES 1 Designed to pair perfectly with 60cm ovens and companion
products 2 Install in multiple configurations to suit your kitchen design 3 Intuitive touch display 4 13 functions to suit any taste and selection from Espresso
to Latte 5 Programmable timer turns on the Coffee Maker at the ideal
time each day 6 Favourite coffee types are memorised and stored in custom
profiles 7 Stainless steel conical burr grinder with 13 coarseness
positions 8 15 bar pump pressure “0 Self-cleaning function and easy to empty coffee grounds
container and drip tray “1 2.4L water tank capacity
SERIES & STYLE Series 9 Minimal

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 12

SPECIFICATION GUIDE | WARMING DRAWER, 60CM, TALL

WB60SMTB1-SET

OVERVIEW
Designed to complement our Minimal style ovens, these warming drawers are handle-free, and push-to-open for a coherent, considered look. Beautiful to use, with capacitive touch controls and six tailored functions for warming, proofing, dehydrating and slow cook. Pair with other companion products to create a kitchen suite for every need.
PRODUCTS WB60SMTB1-SET – Black Glass Warming Drawer, 60cm, Tall, Panel Ready
This model comes with an accessory door panel, and is not suitable for use with a custom door panel

FEATURES 1 Seamless pairing with our Minimal style ovens and other
companion products 2 Push-to-open drawer
3 Easy-to-use capacitive touch controls
4 Automatic timing and switch-off functionality
5 Easy-to-clean, smooth-glass base
6 Room for 16 standard-sized place settings 7 Versatile with six tailored programmes for warming,
proofing, dehydrating and slow cook

Warming Drawer WB60SMTB1-SET, paired with Steam Oven OS60NMTDB1

SERIES & STYLE
Series 9 Minimal

ACCESSORIES 1 Accessory rack for optimising space

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 13

SPECIFICATION GUIDE | WARMING DRAWER, 60CM

WB60SMB1-SET | WB60SMG1-SET

Warming Drawer WB60SMB1-SET, paired with Steam Oven OS60NMTDB1

OVERVIEW
Designed to complement our Minimal style ovens, these warming drawers are handle-free, and push-to-open for a coherent, considered look. Beautiful to use, with capacitive touch controls and six tailored functions for warming, proofing, dehydrating and slow cook. Pair with other companion products to create a kitchen suite for every need.
PRODUCTS WB60SMB1-SET – Black Glass Warming Drawer, 60cm, Panel Ready WB60SMG1-SET – Grey Glass Warming Drawer, 60cm, Panel Ready
*This model comes with an accessory door panel, and is not suitable for use with a custom door panel

FEATURES 1 Seamless pairing with our Minimal style ovens and other
companion products 2 Push-to-open drawer
3 Easy-to-use capacitive touch controls
4 Easy-to-clean, smooth-glass base
5 Room for six standard-sized place settings
6 Automatic timing, switch-off functionality
7 Interior LED lighting 8 Versatile with six tailored programmes for warming,
proofing, dehydrating and slow cook

Warming Drawer WB60SMG1-SET, paired with Steam Oven OS60NMTDG1

SERIES & STYLE
Series 9 Minimal

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 14

SPECIFICATION GUIDE | VACUUM SEAL DRAWER, 60CM

VB60SMB1-SET | VB60SMG1-SET

Vacuum Seal Drawer VB60SMB1-SET, paired with Steam Oven OS60NMTDB1 Vacuum Seal Drawer VB60SMG1-SET, paired with Steam Oven OS60NMTDG1

OVERVIEW Designed to match our Minimal style appliances, the Vacuum Seal Drawer is the ideal companion for our Combination Steam Oven. Prepares food for sous vide cooking, or vacuum sealing for marinating, food storage and portioning and resealing. Beautiful to use, with capacitive touch controls, these drawers deliver the performance to achieve perfect results.
PRODUCTS VB60SMB1-SET – Black Glass Vacuum Seal Drawer, 60cm, Panel Ready VB60SMG1-SET – Grey Glass Vacuum Seal Drawer, 60cm, Panel Ready
*This model comes with an accessory door panel, and is not suitable for use with a custom door panel
SERIES & STYLE Series 9 Minimal

FEATURES 1 Seamless pairing with our Minimal style ovens and other
companion products 2 Push-to-open drawer 3 Three levels of vacuum and heat sealing 4 Easy-to-clean base 5 Easy-to-use capacitive touch controls 6 Vacuum sealing for easy food portioning, marinating,
storage and extended shelf life, or re-sealing 7 Effortless preparation for sous vide cooking 8 Maintenance and moisture indicator
ACCESSORIES 1 External vacuuming accessory kit 2 Large BPA free vacuum seal bags (50 bags, part 793034) 3 Small BPA-free vacuum seal bags (50 bags, part 793033)

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 15

SPECIFICATION GUIDE | DIMENSIONS

ALL MODELS

PRODUCT DIMENSIONS

e f A
B

d

e

f

A c

B

e

d

f

A c

B

e

d

f

A c

B

d

e

f

A c

B

d

e

f

A c

B

e

d

f

A c

B

d

e

f

A c

B

d c

CAVITY DIMENSIONS

I

h

I

h

I

h

I

h

I

h

I

h

I

h

I

h

g

VACUUM SEAL DRAWER VB60SMB1-SET VB60SMG1-SET

WARMING DRAWER WB60SMB1-SET WB60SMG1-SET

WARMING DRAWER TALL WB60SMTB1-SET

BUILT-IN COFFEE MAKER EB60MSB1 EB60MSG1

COMBINATION MICROWAVE OVEN
OM60NMTDB1 OM60NMTDG1

COMBINATION STEAM OVEN
OS60NMTDB1 OS60NMTDG1

COMBINATION STEAM OVEN
OS60SMTDB1 OS60SMTDG1

OVEN OB60SMPTDB1 OB60SMPTDG1

PRODUCT DIMENSIONS A Overall height B Overall width C Chassis height D Chassis width E Chassis depth F Front panel thickness
Depth of oven door fully open *Measured from front of control panel **Includes side brackets

140mm 596mm 140mm 556mm** 545mm 20mm
–

140mm 596mm 140mm 543mm 547mm 20mm
–

290mm 596mm 290mm 543mm 547mm 20mm
–

458mm 596mm 445mm 560mm 460mm 20mm
–

CAVITY DIMENSIONS
G Minimum inside height of cavity

142mm**

292mm**

450mm

H Minimum inside width of cavity

560mm

I Minimum inside depth of cavity

550mm

545mm*

Recommened cabinet width

600mm

*Requires ventilation at the rear of the cavity **Standalone installation measurement can be installed with appliance on top. Drawers can fully support 60cm Fisher & Paykel wall oven, without adding shelf in between

458mm 596mm 435mm 556mm 545mm 20mm 320mm
440mm 560mm 550mm 600mm

458mm 596mm 435mm 556mm 545mm 20mm 320mm*
440mm 560mm 550mm 600mm

598mm 596mm 575mm 556mm 545mm 20mm 460mm*
580mm 560mm 550mm 600mm

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 16

SPECIFICATION GUIDE | POWER, WEIGHT AND CAPACITY

ALL MODELS

VACUUM SEAL DRAWER VB60SMB1-SET VB60SMG1-SET

POWER REQUIREMENTS Supply Service Connection
WEIGHT Packaged Unpackaged
CAPACITY Total oven Total water tank

220240 V, 50 Hz 10 A
Flex cord 1800mm
42kg 35kg
–

WARMING DRAWER WB60SMB1-SET WB60SMG1-SET

WARMING DRAWER TALL WB60SMTB1-SET

BUILT-IN COFFEE MAKER EB60MSB1 EB60MSG1

COMBINATION MICROWAVE OVEN
OM60NMTDB1 OM60NMTDG1

COMBINATION STEAM OVEN
OS60NMTDB1 OS60NMTDG1

220240 V, 50 Hz 10 A
Flex cord 1800mm

220240 V, 50 Hz 10 A
Flex cord 1700mm

220240 V, 50 Hz 20 A
Hard wired

22kg 18kg

25kg 20kg

39kg 29kg

46kg 41kg

52kg 39kg

–

49L

55L

–

2.4L

–

1.4L

COMBINATION STEAM OVEN
OS60SMTDB1 OS60SMTDG1
220240 V, 50 Hz 20 A
Hard wired
65kg 46kg
85L 1.4L

OVEN OB60SMPTDB1 OB60SMPTDG1
220240 V, 50 Hz 20 A
Hard wired
44kg 38kg
85L –

SERVICES
For more infomation on cord length, water supply and electrical requirements, refer to the ‘Services’ section of this Planning Guide.

WAT E R
All Coffee Makers and Steam Ovens have internal water tanks which need to be filled manually. No external water supply is required.

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 17

DATA SHEETS

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

PAGE 18

DATA SHEET | OVEN, 60CM

POWER OUTLET LOCATION

G

C
PLAN VIEW B 596
J HM
FRONT VIEW
90003508B

D 565
DATUM : FRONT OF CHASSIS
L

DATUM : FRONT OF CHASSIS

N

E

K

O

A 598

OB60SMPTDB1 | OB60SMPTDG1

Model no: Oven, 60cm – OB60SMPTDB1, OB60SMPTDG1
Product Dimensions A Overall height of product B Overall width of product C Depth of control panel (excludes dial and handle) D Depth of chassis and control panel (excludes dial and handle) E Depth of chassis F Height of chassis G Width of chassis H Height from bottom datum to top of oven door I Height from bottom datum to bottom of door J Height of control panel K Gap between door and control panel L Depth of door when open (measured from front of door) M Height from bottom datum to centerline of handle N Depth of handle (measured from front of door) O Thickness of handle

mm 598 596
20 565 545 575 556 487
12 100
11 460 464
42 16

Minimum Clearances – Flush Installation

mm

Minimum inside height of cavity

580

Minimum inside width of cavity

560

Minimum inside depth of cavity

550

Minimum clearances above oven control panel to upper cabinetry

front panel or appliance

2

Minimum clearances between bottom of oven chassis to lower

cabinetry front panel or appliance

2

Ensure a 5mm minimum clearance is maintained between the top of the oven chassis and the cabinetry. Ensure the oven is not bearing any weight from cabinetry or products installed above.

IMPORTANT NOTE: For full installation and clearance details please refer to our installation manual.
F

I L

PROFILE VIEW

DATUM : BOTTOM OF CHASSIS

INDICATES PRODUCT DATUM ——————————————INDICATES CABINETRY CLEARANCES ——————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 19

DATA SHEET | COMBINATION STEAM OVEN, 60CM

POWER OUTLET LOCATION

G

C P
WATER TANK FULLY OPEN
PLAN VIEW B 596
J
HM

D 565

WATER TANK

DATUM : FRONT OF CHASSIS

CONTROL PANEL

R Q

L

DATUM : FRONT OF CHASSIS

N

E

K

O

A 598

OS60SMTDB1 | OS60SMTDG1

Model no: Combination Steam Oven, 60cm – OS60SMTDB1, OS60SMTDG1
Product Dimensions A Overall height of product B Overall width of product C Depth of control panel (excludes dial and handle) D Depth of chassis and control panel (excludes dial and handle) E Depth of chassis F Height of chassis G Width of chassis H Height from bottom datum to top of oven door I Height from bottom datum to bottom of door J Height of control panel K Gap between door and control panel L Depth of door when open (measured from front of door) M Height from bottom datum to centerline of handle N Depth of handle (measured from front of door) O Thickness of handle P Control panel fully open (measured from front of door) Q Control panel half open (measured from front of door) R Water tank carriage fully open (measured from front of door)

mm 598 596
20 565 545 575 556 487
12 100
11 460 464
42 16 170 84 133

Minimum Clearances – Flush Installation

mm

Minimum inside height of cavity

580

Minimum inside width of cavity

560

Minimum inside depth of cavity

550

Minimum clearances above oven control panel to upper cabinetry

front panel or appliance

2

Minimum clearances between bottom of oven chassis to lower

cabinetry front panel or appliance

2

Ensure a 5mm minimum clearance is maintained between the top of the oven chassis and

F

the cabinetry. Ensure the oven is not bearing any weight from cabinetry or products installed above.

IMPORTANT NOTE: For full installation and clearance details please refer to our installation manual.

FRONT VIEW
90003508B

I L

PROFILE VIEW

DATUM : BOTTOM OF CHASSIS

INDICATES PRODUCT DATUM ——————————————INDICATES CABINETRY CLEARANCES ——————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 20

DATA SHEET | COMBINATION STEAM OVEN, 60CM

OS60NMTDB1 | OS60NMTDG1

G
POWER OUTLET LOCATION

C P
WATER TANK FULLY OPEN

PLAN VIEW

J HM

B 596

FRONT VIEW

D 565

WATER TANK

DATUM : FRONT OF CHASSIS

CONTROL PANEL

L

N

K A 458

O

I L

R Q
DATUM : FRONT OF CHASSIS

Model no: Combination Steam Oven, 60cm – OS60NMTDB1, OS60NMTDG1

Product Dimensions

mm

A Overall height of product

458

B Overall width of product

596

C Depth of control panel (excludes dial and handle)

20

D Depth of chassis and control panel (excludes dial and handle)

565

E Depth of chassis

545

F Height of chassis

435

G Width of chassis

556

H Height from bottom datum to top of oven door

347

I Height from bottom datum to bottom of door

12

J Height of control panel

100

K Gap between door and control panel

11

L Depth of door when open (measured from front of door)

320

M Height from bottom datum to centerline of handle

324

N Depth of handle (measured from front of door)

42

O Thickness of handle

16

P Control panel fully open (measured from front of door)

170

Q Control panel half open (measured from front of door)

84

R Water tank carriage fully open (measured from front of door)

133

E PROFILE VIEW

F
DATUM : BOTTOM OF CHASSIS

Minimum Clearances – Flush Installation Minimum inside height of cavity Minimum inside width of cavity Minimum inside depth of cavity
Minimum clearances above oven control panel to upper cabinetry front panel or appliance

mm 440 560 550
2

Minimum clearances between bottom of oven chassis to lower cabinetry front panel or appliance

2

Ensure a 5mm minimum clearance is maintained between the top of the oven chassis and the cabinetry. Ensure the oven is not bearing any weight from cabinetry or products installed above.

IMPORTANT NOTE: For full installation and clearance details please refer to our installation manual.

INDICATES PRODUCT DATUM ——————————————INDICATES CABINETRY CLEARANCES ——————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 21

DATA SHEET | COMBINATION MICROWAVE OVEN, 60CM

OM60NMTDB1 | OM60NMTDG1

G
POWER OUTLET LOCATION

C

J HM

PLAN VIEW B 596

FRONT VIEW

D 565
DATUM : FRONT OF CHASSIS
L

Model no: Combination Microwave Oven, 60cm – OM60NMTDB1, OM60NMTDG1

Product Dimensions

mm

A Overall height of product

458

B Overall width of product

596

C Depth of control panel (excludes dial and handle)

20

D Depth of chassis and control panel (excludes dial and handle)

565

E Depth of chassis

545

F Height of chassis

435

G Width of chassis

556

H Height from bottom datum to top of oven door

347

I Height from bottom datum to bottom of door

12

J Height of control panel

100

K Gap between door and control panel

11

L Depth of door when open (measured from front of door)

320

M Height from bottom datum to centerline of handle

324

N Depth of handle (measured from front of door)

42

O Thickness of handle

16

K A 458

DATUM : FRONT OF CHASSIS

N

E

O

Minimum Clearances – Flush Installation Minimum inside height of cavity Minimum inside width of cavity Minimum inside depth of cavity Rear ventilation air vent depth Rear ventilation air vent width Minimum clearances above oven control panel to upper cabinetry front panel or appliance

mm 440 560 550
50 560
2

Minimum clearances between bottom of oven chassis to lower

cabinetry front panel or appliance

2

F

*A rear ventilation air vent totalling 280cm2 is required. The air vent must be located at the rear of the cabinet, it can be positioned at the base, sides, back or top of the cavity.

Ensure a 5mm minimum clearance is maintained between the top of the oven chassis and the cabinetry. Ensure the oven is not bearing any weight from cabinetry or products installed above.

I L

PROFILE VIEW

DATUM : BOTTOM OF CHASSIS VENTILATION

IMPORTANT NOTE: For full installation and clearance details please refer to our installation manual.
INDICATES PRODUCT DATUM ——————————————INDICATES CABINETRY CLEARANCES ——————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 22

DATA SHEET | BUILT-IN COFFEE MAKER, 60CM
E

F

DATUM : FRONT OF CHASSIS
G

PLAN VIEW

K

B 596 H
458 A

DATUM : BOTTOM OF CHASSIS

I
FRONT VIEW

EB60MSB1 | EB60MSG1

NOT TO SCALE DATUM : FRONT OF CHASSIS

K

C 480

SPACERS OPTIONAL, SUPPLIED WITH COFFEEMAKER
J
D

Model no: Built-in Coffee Maker, 60cm – EB60MSB1, EB60MSG1
Product Dimensions A Overall height of product B Overall width of product C Overall depth of product (excludes front metal trim) D Height of chassis E Width of chassis F Depth of chassis G Depth of coffee maker front frame and control panel (excludes
front metal trim) H Height of control panel I Height of horizontal lower section from bottom datum J Stepdown from control panel to chassis K Extent coffee maker pulls out

mm 458 596 480 445 560 460
20
100 83 13
435

Minimum Clearances – Flush Installation Minimum inside height of cavity Minimum inside width of cavity Minimum inside depth of cavity from front datum Overall height of cabinetry Overall width of cabinetry Rear ventilation air vent depth Rear ventilation air vent width
Minimum clearances above built-in coffee maker control panel to upper cabinetry front panel or appliance
Minimum clearances between bottom of coffee maker rails to lower cabinetry front panel or appliance
*A rear ventilation air vent totalling 280cm2 is required. The air vent must be located at the rear of cabinet. It can be positioned at the base, sides, back or top of the cavity.

mm 450 560 545 460 600
50 560
2
2

IMPORTANT NOTE: For full installation and clearance details please refer to our installation manual.

PROFILE VIEW

VENTILATION

INDICATES PRODUCT DATUM ——————————————INDICATES CABINETRY CLEARANCES ——————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 23

DATA SHEET | WARMING DRAWER, 60CM, TALL

H

E

H

G

PLAN VIEW B 596

DATUM : BOTTOM OF PRODUCT

0

100 200

FRONT VIEW
400 millimetres

90003508B

F

DATUM : FRONT OF CHASSIS

NOT TO SCALE

I

DATUM : FRONT OF CHASSIS
C 564

A
290

D

J F

PROFILE VIEW

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

WB60SMTB1-SET

Model no: Warming Drawer, 60cm, Tall – WB60SMTB1-SET

Product Dimensions

mm

A Overall height of product

290

B Overall width of product

596

C Overall depth (incl. front panel & power plug)

564

D Height of drawer front panel

286

E Width of chassis

543

F Depth of drawer front panel and flange

20

G Depth of chassis (includes power plug, excludes flange)

547

H Distance from side of chassis to side of drawer front

36

I Depth of open drawer (mesured from front of drawer panel)

414

J Height from bottom of chassis to bottom of front panel

2

Dimension Clearances – Flush Installation Minimum inside height of cavity Minimum inside width of cavity Minimum inside depth of cavity Overall width of cabinetry
Minimum clearances above drawer front panel to upper cabinetry front panel or appliance*
Minimum clearances between bottom of drawer chassis to lower cabinetry front panel or appliance

mm 292 560 550 600
4
2

*Achieve a smaller gap between drawer front panel to upper cabinetry front panel by dropping cabinetry front panel down

IMPORTANT NOTE: For full installation and clearance details please refer to our installation manual.

INDICATES PRODUCT DATUM ——————————————INDICATES CABINETRY CLEARANCES ——————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com

<< CONTENTS PAGE 24

DATA SHEET | WARMING DRAWER, 60CM

H

E

H

PLAN VIEW

B 596

DATUM : BOTTOM OF PRODUCT

0

100 200

FRONT VIEW
400 millimetres

G F

DATUM : FRONT OF CHASSIS

NOT TO SCALE

DATUM : FRONT OF CHASSIS

I

C 567

A

D

140

J F

PROFILE VIEW

WB60SMB1-SET | WB60SMG1-SET

Model no: Warming Drawer, 60cm – WB60SMB1-SET, WB60SMG1-SET

Product Dimensions

mm

A Overall height of product

140

B Overall width of product

596

C Overall depth (incl. front panel & power plug, excludes

stainless cap)

567

D Height of drawer front panel

136

E Width of chassis

543

F Depth of drawer front panel and flange (excludes stainless cap)

20

G Depth of chassis (includes power plug, excludes flange)

547

H Distance from side of chassis to side of drawer front

36

I Depth of open drawer (mesured from front of drawer panel)

414

J Height from bottom of chassis to bottom of front panel

2

Dimension Clearances – Flush Installation Minimum inside height of cavity Minimum inside width of cavity Minimum inside depth of cavity Overall width of cabinetry
Minimum clearances above drawer front panel to upper cabinetry front panel or appliance*
Minimum clearances between bottom of drawer chassis to lower cabinetry front panel or appliance

mm 142 560 550 600
4
2

*Achieve a smaller gap between drawer front panel to upper cabinetry front panel by dropping cabinetry front panel down

IMPORTANT NOTE: For full installation and clearance details please refer to our installation manual.

INDICATES PRODUCT DATUM ——————————————INDICATES CABINETRY CLEARANCES ——————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 25

DATA SHEET | VACUUM SEAL DRAWER, 60CM

H

E

H

PLAN VIEW

B 596

DATUM : BOTTOM OF PRODUCT

FRONT VIEW

0

100 200

400 millimetres

G F

DATUM : FRONT OF CHASSIS

NOT TO SCALE

DATUM : FRONT OF CHASSIS

J

C 565

A

D

140

K F

I PROFILE VIEW

VB60SMB1-SET | VB60SMG1-SET

Model no: Vacuum Seal Drawer – VB60SMB1-SET, VB60SMG1-SET

Product Dimensions

mm

A Overall height of product

140

B Overall width of product

596

C Overall depth (incl. front panel & power plug)

565

D Height of drawer front panel

136

E Width of chassis (includes side brackets)

556

F Depth of drawer front panel and flange

20

G Depth of chassis (includes power plug, excludes flange)

545

H Distance from side bracket to side of drawer front

20

I Distance between flange and side bracket

358

J Depth of open drawer (measured from front of drawer panel)

414

K Height from bottom of chassis to bottom of front panel

2

Dimension Clearances – Flush Installation Minimum inside height of cavity Minimum inside width of cavity Minimum inside depth of cavity Overall width of cabinetry
Minimum clearances above drawer front panel to upper cabinetry front panel or appliance*
Minimum clearances between bottom of drawer chassis to lower cabinetry front panel or appliance

mm 142 560 550 600
4
2

*Achieve a smaller gap between drawer front panel to upper cabinetry front panel by dropping cabinetry front panel down

IMPORTANT NOTE: For full installation and clearance details please refer to our installation manual.

INDICATES PRODUCT DATUM ——————————————INDICATES CABINETRY CLEARANCES ——————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”). Please read the Installation Guide for detailed information on installing the product. For full installation instructions visit fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 26

PLANNING CONSIDERATIONS

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

PAGE 27

PLANNING CONSIDERATIONS | CABINETRY PREPARATION

ALL MODELS

DIVIDING SHELF
If the appliance front panel is thicker than the cabinetry front panel, adjust the dividing shelf depth
to ensure the oven sits flush with the front of the c a b i n e t r y.

BLACK CLASHING
Black clashing is recommended on front facing edges where products are located and on side cabinets if cabinet is rebated.

Adjacent cabinet

Ventilation gap

OVEN CABINETRY TRIM
If using light-colored cabinets, we recommend using black cabinetry trim to help hide the cabinetry beneath
the front door panel of the appliance. Ensure the trim height does not interfere with any appliances or cabinetry below. Black cabinetry trim is included with
ovens.

LEVEL CABINETRY
Check the shelves are level and the side panels are straight.

Depth 20mm

Width 594mm

Thickness 1.5mm
Height 20mm

Cabinetry front panel above

Dividing shelf

Combination Steam Oven or Combination Microwave Oven or Built-in Coffee Maker

Supporting shelf

Oven or Combination Steam Oven

Cabinetry front panel below

Warming Drawer, Tall or Warming Drawer or Vacuum Seal Drawer

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 28

PLANNING CONSIDERATIONS | CONFIGURATIONS, 60CM

Ventilation air vent is required at rear for some products.

B
2mm

Dividing shelves are required to support stacked appliances and to achieve correct clearance.
Dividing shelves must be constructed from material that will support the weight of the appliances. Ensure the oven is not bearing any weight from cabinetry or products installed above.
Warming Drawers and Vacuum Seal Drawers can fully support a 60cm Fisher & Paykel oven, without adding a shelf in between.
STACK EXPLODED PROFILE VIEW

Minimum clearances above appliance control panel to upper appliance
STACK HEIGHT
A Overall product height

B Minimum clearances above appliance control panel or
front panel to upper appliance =
C Stacked Height

B

C

A

FRONT

Stack Height Minimum inside height of cavity

ALL MODELS
Dividing shelf location, shelf must be above min inside height of cavity.

D

PRODUCT PROFILE VIEW

BACK

MINIMUM DIMENSION CLEARANCES

VACUUM SEAL DRAWER VB60SMB1-SET VB60SMG1-SET

WARMING DRAWER WB60SMB1-SET WB60SMG1-SET

WARMING DRAWER TALL WB60SMTB1-SET

DIMENSIONS A Overall product height B Minimum clearance
above C Stack height
D Minimum inside height of cavity

140mm –
140mm** 140mm

290mm –
290mm** 290mm

Stack Height is overall product height with minimum clearances above appliance control panel or front panel to upper appliance Warming Drawers and Vacuum Seal Drawers can fully support a 60cm Fisher & Paykel oven, without adding a shelf in between. Includes coffee maker rail height

BUILT-IN COFFEE MAKER EB60MSB1 EB60MSG1

COMBINATION MICROWAVE OVEN
OM60NMTDB1 OM60NMTDG1

458mm** 2mm
460mm 450mm

458mm 2mm
460mm* 440mm

COMBINATION STEAM OVEN
OS60NMTDB1 OS60NMTDG1
458mm 2mm
460mm*
440mm

COMBINATION STEAM OVEN
OS60SMTDB1 OS60SMTDG1
598mm 2mm
600mm*
580mm

OVEN OB60SMPTDB1 OB60SMPTDG1
598mm 2mm
600mm* 580mm

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 29

PLANNING CONSIDERATIONS | OVEN, 60CM

COOKTOP CLEARANCE

1 J

If installing a cooktop above the oven, ensure adequate clearance is provided for the
cooktop as per the cooktop manufacturer’s instructions.

CLEARANCE ABOVE PROFILE VIEW

FRONT

J

1

A
2 K

BACK
D I G

2 K
CLEARANCE BOTTOM PROFILE VIEW
3
B

3
L
ADJACENT CABINET PLAN VIEW
C

OB60SMPTDB1 | OB60SMPTDG1

Model no: Oven – OB60SMPTDB1, OB60SMPTDG1

Cabinetry Dimensions – Flush A Overall cabinet height*

mm 600

B Overall cabinet width – single installation

600

C Minimum inside width of cavity

560

D Minimum inside height of cavity

580

E Minimum inside depth of cavity

550

F Thickness of cabinetry front panel**

16-20

*Overall cabinet height is overall product height with minimum clearance above oven control panel to upper cabinetry front panel. **Cabinetry shown in drawings 19mm panels.

Note: Concider placement of shelf above minimum inside height of cavity.

Product Dimensions

mm

G Overall height of product

598

H Overall width of product

596

I Thickness of oven front panel (excludes dial and handle)

20

Cabinetry Clearances

mm

J Minimum clearances above oven control panel to upper cabinetry front panel

2

K Minimum clearances between bottom of oven chassis to lower cabinetry front panel

2

L Minimum clearance between adjacent front panel or appliance

2

F

E

CABINETRY PROFILE VIEW

H

Oven

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 30

PLANNING CONSIDERATIONS | COMBINATION STEAM OVEN, 60CM

COOKTOP CLEARANCE
If installing a cooktop above the oven, ensure adequate clearance is provided for the
cooktop as per the cooktop manufacturer’s instructions.

1 J
CLEARANCE ABOVE PROFILE VIEW

2
K
CLEARANCE BOTTOM PROFILE VIEW

FRONT

J

1

A
2 K

BACK
D I G

3 B

3
L
ADJACENT CABINET PLAN VIEW
C

OS60SMTDB1 | OS60SMTDG1

Model no: Combination Steam Oven – OS60SMTDB1, OS60SMTDG1

Cabinetry Dimensions – Flush A Overall cabinet Height*

mm 600

B Overall cabinet width – single installation

600

C Minimum inside width of cavity

560

D Minimum inside height of cavity

580

E Minimum inside depth of cavity

550

F Thickness of cabinetry front panel**

16-20

*Overall cabinet height is overall product height with minimum clearance above oven control panel to upper cabinetry front panel. **Cabinetry shown in drawings 19mm panels.

Note: Concider placement of shelf above minimum inside height of cavity.

Product Dimensions

mm

G Overall height of product

598

H Overall width of product

596

I Thickness of oven front panel (excludes dial and handle)

20

Cabinetry Clearances

mm

J Minimum clearances above oven control panel to upper cabinetry front panel

2

K Minimum clearances between bottom of oven chassis to lower cabinetry front panel

2

L Minimum clearance between adjacent front panel or appliance

2

F

E

CABINETRY PROFILE VIEW

H

Combination Steam Oven

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 31

PLANNING CONSIDERATIONS | COMBINATION STEAM OVEN, 60CM

COOKTOP CLEARANCE
If installing a cooktop above the oven, ensure adequate clearance is provided for the
cooktop as per the cooktop manufacturer’s instructions.

1 K
CLEARANCE ABOVE PROFILE VIEW

2
L
CLEARANCE BOTTOM PROFILE VIEW

3
M
ADJACENT CABINET PLAN VIEW

FRONT
K1
A 2
L

BACK
D

F

E

CABINETRY PROFILE VIEW

J H
I

C 3
B
Combination Steam Oven

OS60NMTDB1 | OS60NMTDG1

Model no: Combination Steam Oven – OS60NMTDB1, OS60NMTDG1

Cabinetry Dimensions – Flush A Overall cabinet height*

mm 460

B Overall cabinet width – single installation

600

C Minimum inside width of cavity

560

D Minimum inside height of cavity

440

E Minimum inside depth of cavity

550

F Thickness of cabinetry front panel**

16-20

*Overall cabinet height is overall product height with minimum clearance above oven control panel to upper cabinetry front panel. **Cabinetry shown in drawings 19mm panels.

Note: Concider placement of shelf above minimum inside height of cavity.

Product Dimensions

mm

G Overall height of product

458

H Overall width of product

596

I Thickness of oven front panel (excludes dial and handle)

20

Cabinetry Clearances

mm

J Minimum clearances above oven control panel to upper cabinetry front panel

2

K Minimum clearances between bottom of oven chassis to lower cabinetry front panel

2

L Minimum clearance between adjacent front panel or appliance

2

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 32

PLANNING CONSIDERATIONS | COMBINATION MICROWAVE OVEN, 60CM

C o oVkEtNoTpI LCAl eTaI OraNn c e
VeInf tiinl asttiaolnl i nogf a5 0cmo omk txo 5p6a0bmomve otrh et oot avlel ni n, g e n s2u8r0ecamd2e qi su aret eq ucilreeadr.aTnhce ai si rpvreonvti dme du sftobr et h e
c olookctaotpe da sa tptehret hreeacr ooof kctaobpi nmeat n, ui tf accatnu rbeer ‘s p o s i t i o n e d a t t hi nesbt rauscet,i ot onps ., s i d e s , o r b a c k .

1 K
CLEARANCE ABOVE PROFILE VIEW

2
L
CLEARANCE BOTTOM PROFILE VIEW

3
M
ADJACENT CABINET PLAN VIEW

FRONT
K1
A 2
L

G
BACK
D

F

E

CABINETRY PROFILE VIEW

J H
I

Ventilation gap
C 3
B
Combination Microwave Oven

OM60NMTDB1 | OM60NMTDG1

Model no: Combination Microwave Oven – OM60NMTDB1, OM60NMTDG1

Cabinetry Dimensions – Flush A Overall cabinet height*

mm 460

B Overall cabinet width – single installation

600

C Minimum inside width of cavity**

560

D Minimum inside height of cavity

440

E Minimum inside depth of cavity

550

F Thickness of cabinetry front panel**

16-20

G Ventilation gap***

50

Overall cabinet height is overall product height with minimum clearance above oven control panel to upper cabinetry front panel. Cabinetry shown in drawings 19mm panels. A rear ventilation air vent totalling 280cm2 is required. The air vent must be located at the rear of the cabinet, it can be positioned at the base, sides, back or top of the cavity.

Note: Concider placement of shelf above minimum inside height of cavity.

Product Dimensions

mm

H Overall height of product

458

I Overall width of product

596

J Thickness of oven front panel (excludes dial and handle)

20

Cabinetry Clearances

mm

K Minimum clearances above oven control panel to upper cabinetry front panel

2

L Minimum clearances between bottom of oven chassis to lower cabinetry front panel

2

M Minimum clearance between adjacent front panel or appliance

2

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 33

PLANNING CONSIDERATIONS | BUILT-IN COFFEE MAKER, 60CM

V E N T I L AT I O N
Ventilation of 50mm x 560mm or totalling 280cm2 is required. The air vent must be located at the rear of cabinet, it can be positioned at the base, top, sides, or back.

1 K
CLEARANCE ABOVE PROFILE VIEW

2
L
CLEARANCE BOTTOM PROFILE VIEW

FRONT
K1
A 2
L

F

E

G
BACK
D

J H

3 B

3
M
ADJACENT CABINET PLAN VIEW Ventilation gap
C

EB60MSB1 | EB60MSG1

Model no: Built-in Coffee Maker – EB60MSB1, EB60MSG1

Cabinetry Dimensions – Flush A Overall cabinet height*

mm 460

B Overall cabinet width – single installation

600

C Minimum inside width of cavity**

560

D Minimum inside height of cavity

450

E Minimum inside depth of cavity

545

F Thickness of cabinetry front panel**

16-20

G Ventilation gap***

50

Overall cabinet height is overall product height with minimum clearance above coffee maker control panel to upper cabinetry front panel Cabinetry shown in drawings 19mm panels. A rear ventilation air vent totalling 280cm2 is required. The air vent must be located at the rear of the cabinet, it can be positioned at the base, sides, back or top of the cavity.

Note: Concider placement of shelf above minimum inside height of cavity.

Product Dimensions

mm

H Overall height of product

458

I Overall width of product

596

J Thickness of coffee maker control panel

20

Cabinetry Clearances

mm

K Minimum clearances above coffee maker control panel to upper cabinetry front panel

2

L Minimum clearances between bottom of coffee maker rails to lower cabinetry front panel

2

M Minimum clearance between adjacent front panel or appliance

2

CABINETRY PROFILE VIEW

I

Built-in Coffee Maker

Built-in Coffee Maker Rail

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 34

PLANNING CONSIDERATIONS | WARMING DRAWER, 60CM, TALL

NOTE
The Warming Drawer can fully support a 60cm Fisher & Paykel oven, without adding a shelf in between.

1 J
CLEARANCE ABOVE PROFILE VIEW

2
K
CLEARANCE BOTTOM PROFILE VIEW

3
L
ADJACENT CABINET PLAN VIEW

FRONT

J

1

A 2
K

BACK
D

F

E

CABINETRY PROFILE VIEW

I G
H

C 3
B
Warming Drawer, Tall

WB60SMTB1-SET

Model no: Warming Drawer, Tall – WB60SMTB1-SET

Cabinetry Dimensions – Flush

mm

A Overall cabinet height*

294

B Overall cabinet width

600

C Minimum inside width of cavity

560

D Minimum inside height of cavity

292

E Minimum inside depth of cavity

550

F Thickness of cabinetry front panel**

16-20

*Overall cabinet height is overall product height with minimum clearance above drawer front panel to upper cabinetry front panel. **Cabinetry shown in drawings 19mm panels.

Note: Concider placement of shelf above minimum inside height of cavity.

Product Dimensions

mm

G Overall height of product

290

H Overall width of product

596

I Thickness of warming drawer front panel and flange

20

Cabinetry Clearances

mm

J Minimum clearances above drawer front panel to upper cabinetry front panel*

4

K Minimum clearances between bottom of drawer chassis to lower cabinetry front panel

2

L Minimum clearance between adjacent front panel or appliance

2

*Achieve a smaller gap between drawer front panel to upper cabinetry front panel by dropping cabinetry front panel down

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 35

PLANNING CONSIDERATIONS | WARMING DRAWER, 60CM

NOTE
The Warming Drawer can fully support a 60cm Fisher & Paykel oven, without adding a shelf in between.

1 J
CLEARANCE ABOVE PROFILE VIEW

2
K
CLEARANCE BOTTOM PROFILE VIEW

3
L
ADJACENT CABINET PLAN VIEW

FRONT

J

1

A

2

K

F

E

BACK
D

CABINETRY PROFILE VIEW

I G
H

C 3 B
Warming Drawer

WB60SMB1-SET | WB60SMG1-SET

Model no: Warming Drawer – WB60SMB1-SET, WB60SMG1-SET

Cabinetry Dimensions – Flush

mm

A Overall cabinet height*

144

B Overall cabinet width – single installation

600

C Minimum inside width of cavity

560

D Minimum inside height of cavity

142

E Minimum inside depth of cavity

550

F Thickness of cabinetry front panel**

16-20

*Overall cabinet height is overall product height with minimum clearance above drawer front panel to upper cabinetry front panel. **Cabinetry shown in drawings 19mm panels.

Note: Concider placement of shelf above minimum inside height of cavity.

Product Dimensions

mm

G Overall height of product

140

H Overall width of product

596

I Thickness of warming drawer front panel and flange

20

Cabinetry Clearances

mm

J Minimum clearances above drawer front panel to upper cabinetry front panel*

4

K Minimum clearances between bottom of drawer chassis to lower cabinetry front panel

2

L Minimum clearance between adjacent front panel or appliance

2

*Achieve a smaller gap between drawer front panel to upper cabinetry front panel by dropping cabinetry front panel down

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 36

PLANNING CONSIDERATIONS | VACUUM SEAL DRAWER, 60CM

NOTE
The Vacuum Seal Drawer can fully support a 60cm Fisher & Paykel oven, without adding a
shelf in between.

1 J
CLEARANCE ABOVE PROFILE VIEW

2
K
CLEARANCE BOTTOM PROFILE VIEW

3
L
ADJACENT CABINET PLAN VIEW

FRONT

J

1

A

2

K

F

E

BACK
D

CABINETRY PROFILE VIEW

I G
H

C 3 B
Vacuum Seal Drawer

VB60SMB1-SET | VB60SMG1-SET

Model no: Vacuum Seal Drawer – VB60SMB1-SET, VB60SMG1-SET

Cabinetry Dimensions – Flush

mm

A Overall cabinet height*

144

B Overall cabinet width – single installation

600

C Minimum inside width of cavity

560

D Minimum inside height of cavity

142

E Minimum inside depth of cavity

550

F Thickness of cabinetry front panel**

16-20

*Overall cabinet height is overall product height with minimum clearance above drawer front panel to upper cabinetry front panel. **Cabinetry shown in drawings 19mm panels.

Note: Concider placement of shelf above minimum inside height of cavity.

Product Dimensions

mm

G Overall height of product

140

H Overall width of product

596

I Thickness of vacuum seal drawer front panel and flange

20

Cabinetry Clearances

mm

J Minimum clearances above drawer front panel to upper cabinetry front panel*

4

K Minimum clearances between bottom of drawer chassis to lower cabinetry front panel

2

L Minimum clearance between adjacent front panel or appliance

2

*Achieve a smaller gap between drawer front panel to upper cabinetry front panel by dropping cabinetry front panel down

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 37

SERVICES

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

PAGE 38

SERVICES | POWER CORD LENGTH AND LOCATION

VB60SMB1-SET | VB60SMG1-SET WB60SMB1-SET | WB60SMG1-SET | WB60SMTB1-SET
EB60MSB1 | EB60MSG1

CONNECTION
Connections may be located in an adjacent cabinet to either side of the appliance.
Ensure power will remain accessible following install to allow access for any future product
maintenance.
BUILT-IN COFFEE MAKER
The power cable must be long enough to allow the appliance to be extracted from the cabinet to fill the coffee bean container. Fix
the power cable with the clip.

123

Max 1800mm

4

Max 1700mm

Clip provided

4

Power Cable Water Tank
POWER CORD Maximum power cord length Location Connection Measured from power outlet
WATER Total Capacity Location

1 VACUUM SEAL DRAWER
VB60SMB1-SET VB60SMG1-SET
1800mm Upper right
Flex cord
–

2 WARMING DRAWER
WB60SMB1-SET WB60SMG1-SET
1800mm Upper right
Flex cord
–

3 WARMING DRAWER TALL
WB60SMTB1-SET
1800mm Upper right
Flex cord
–

4 BUILT-IN COFFEE MAKER
EB60MSB1 EB60MSG1
1700mm Lower centered
Flex cord
2.4L Water tank (internal)

ELECTRICAL Supply Service

220240 V, 50 Hz 10 A

Note: Multiple product installation requires the design of power outlets according to local regulations.

220240 V, 50 Hz 10 A

220240 V, 50 Hz 20 A

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 39

SERVICES | POWER CORD LENGTH AND LOCATION

5
Minimum 1500mm

67
Minimum 1500mm

8
Minimum 1500mm

5

67

8

Power Cable Water Tank

5 COMBINATION MICROWAVE OVEN OM60NMTDB1 OM60NMTDG1

6 COMBINATION STEAM OVEN OS60NMTDB1 OS60NMTDG1

POWER CORD Power cord free length Location Connection

Minimum 1500mm* Upper right Hard wire**

Minimum 1500mm* Upper left Hard wire**

*The electrician provides sufficient free length of power supply cable to reach from the bottom rear of the cavity to at least 1.5m in front of the bottom edge of the opening **For more information, refer to the Installation Guide. Ensure power will remain accessible following install to allow access for any future product maintenance.

WATER

Total Capacity

–

Location

–

1.4L Water tank (internal)

7 COMBINATION STEAMOVEN OS60SMTDB1 OS60SMTDG1
Minimum 1500mm* Upper left Hard wire**
1.4L Water tank (internal)

8

OVEN

OB60SMPTDB1

OB60SMPTDG1

Minimum 1500mm* Upper left Hard wire**

–

ELECTRICAL Supply Service

220240 V, 50 Hz 20 A

Note: Multiple product installation requires the design of power outlets according to local regulations.

220240 V, 50 Hz 20 A

The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available on our website fisherpaykel.com

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

<< CONTENTS PAGE 40

90003508B

PLANNING GUIDE COOKING – VERSION B – SEPTEMBER 2024

PAGE 41