ZillionTrace ZT-28S Environmental Variable Collector Instructions
- September 21, 2024
- ZillionTrace
Table of Contents
Zillion Trace ZT-28S Environmental Variable Collector
Technical Specification
Physical | Dimensions | Main body: L (70mm) x W (51mm) x H (12mm) |
---|---|---|
Weight | Device: 46g (with polymer lithium battery); Optional advanced |
door status module: 39g
Case Enclosure| IP67 dust and water proof
Shell| High performance and anti-flaming engineering plastic
Sensing & Reporting Intervals| Sensing| Collect and process data in
sub-second intervals
Standard Reporting| 5 minutes to 24 hours intervals, programmable
Active Reporting| 5 minutes to 24 hours intervals, programmable
LED| Activation indication
Shutdown Privilege| On-site manual shutdown prohibited
Communication 1| 4G Cellular Communication Networks
Power Design| Battery| 1000mAh Polymer Lithium Battery, Non-
Rechargeable
Battery Life| Up to 90 days with 2 hour reporting interval with strong
cellular coverage and none-extreme temperatures; supports variable intervals
Parameters Monitored 3| Location| Satellite
Positioning(GLONASS, Galileo, GPS and BeiDou); Enhanced positioning (based on
Wi-Fi); Cellular triangulation
Door open| Physical detection (when equipped with the optional door open
status module)
Static Mode| Automatic stationary state detection, 2-30 times of
standard report interval can be set up
Acceleration & Attitude| 3 axis acceleration sensor
Temperature| -35°C ~ +75°C (±0.5°C)
Geo-route/geo-fence| Configurable geo-route/geo-fence with worldwide map
coverage
Features| Can be used as one-time disposable device, recycled multi-trip
device, or fixed-installation long-term use device
Annotations:
- Works with 4G cellular communication networks only; no coverage in countries where 4G networks are not available.
- Not designed to work over an extended period of time outside the temperature range of -30°C ~ 60°C
- Parameter accuracy is based on sensor manufacturer’s specifications and lab testing; accuracy may vary in the field.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
- To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the device, including the antenna.
LTE Band 4: 24.50dB
LTE Band 12: 22.76dB
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>