NIPRO DIAGNOSTICS TRUE2go Meter Test Strips and System User Manual
- June 9, 2024
- NIPRO DIAGNOSTICS
Table of Contents
Meter, Test Strips & System Components
Checking Your Blood Glucose
Using TRUE2go ® A guide for testing your blood glucose
Simple Steps to Test Your Blood Glucose
Blood Glucose Testing
| | 
---|---|---
Wash your hands with warm, soapy water.| Remove Test Strip from vial and close
vial immediately. Insert Test Strip into Test Port with TRUEtest™ facing up.
The Meter turns on.| Lance your finger.
| 
|
Allow a blood drop to form, touch Tip of Strip to top
of blood drop and allow blood to be drawn into
Strip. Remove Test Strip Sample Tip from sample drop
immediately after dashes appear across Meter Display.
CAUTION! Holding the Test Strip Sample Tip to the blood sample too long after
the Meter begins testing may cause inaccurate results.| In as little as 4
seconds, glucose result will be displayed.| Hold Meter in a vertical position
with Test Strip facing down. Press
strip release button to discard the
used Test Strip from the Meter.
WARNING!
NEVER reuse Test Strips. NEVER wipe test Strips with water, alcohol or any
cleaner. DO NOT attempt to remove blood or control sample from Test Strips or
clean Test Strips and re-use. Reuse of Test Strips WILL cause inaccurate
results. NEVER add a second drop of sample to the Strip. Adding more sample
gives an error message.
This guide provides a brief overview on testing your blood glucose. For more
detailed information on complete blood glucose testing procedure, consult
“Testing Your Blood” section in the Owner’s Booklet. For assistance using your
blood glucose System, call our Customer Care Department at
1-800-803-6025.
© 2011 Nipro Diagnostics, Inc. TRUE2go, TRUEtest and the Nipro Diagnostics
logo are
trademarks of Nipro Diagnostics, Inc. F4NPD08 Rev. 22
www.niprodiagnostics.comhttp://goo.gl/PX5h9
Scan this code with your smart phone for additional TRUE2go information. Always refer to the Owner’s Booklet for detailed product information.