GIGABYTE PG5 Gold Fully Modular Power Supply Instruction Manual
- September 21, 2024
- Gigabyte
Table of Contents
GIGABYTE PG5 Gold Fully Modular Power Supply
Power supply manual
Installation
- Unscrew and open the side panel of the chassis
- Install the power supply below
- Connect Motherboard (20+4 Pin) and CPU (4+4 Pin) connectors to your motherboard
- Connect other connectors, like PCI-E (6+2pin), SATA, and Molex from the power supply to your system components and make sure that all of them are well connected
- Close the chassis and reattach the case screws
- Plug in the power cord of the power supply and switch on the power
Cautions and Warnings
- Please unplug or switch off the power supply when installing it
- Please make sure that the power source is consistent and stable before switching on the power supply
- Do not plug or unplug the power cord when the power supply is on. It will cause serious damage to your components
- Do not use the power supply in a high humidity or high-temperature environment
- High voltage exists in the power supply and only an authorized service technician can open the power supply
- All warranties and guarantees will be voided in the event of failure to comply with any of the warnings and cautions covered in this manual.
- If the power supply is not working properly, please contact our Product Service Center.
Troubleshooting
If your computer does not work normally after installing the power supply, please follow the troubleshooting guide as listed below:
- Please make sure the AC power is connected correctly
- Please make sure the Motherboard 20+4pin and CPU 8 pin connectors are connected correctly to the other
- If the power supply still does not work normally, please contact our service center immediately
Warranty
- Gigabyte provides a hardware limited warranty for the power supply on the date of purchase and guarantees this device to be free of defects in material and workmanship. Please keep your receipt with safety.
- This product is designed only for computers and using this device for any other purpose will void the warranty. If you are not familiar with power supply installation, please ask for professional technical assistance.
- The warranty is applied to damages caused through normal usage and it will be void if the device is damaged because of abuse, alteration, misuse, negligence, incorrect voltage supply, air/water pollution, accidents, and natural disasters.
Cable information
Power table
Caution! Hazardous
- Hazardous Voltage inside.
- Trained personnel only.
- Do not open the power supply cover.
- No serviceable components inside.
CONTACT
Asia (Headquarters)
- GIGA-BYTE TECHNOLOGY CO., LTD. Taiwan
- Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
- Tel: +886-2-8912-4000
- http://www.gigabyte.com
China
- GIGABYTE CHINA
- Address: 24/F, HaiTong Securities Tower, No.689 Guangdong Road, Shanghai, China
- Tel: +86-21-6340-0912
Europe
- G.B.T. Technology Trading GmbH
- Address: Am Stadtrand 63, 22047 Hamburg, Germany
- Tel: +49-40-25 33 040
North America
- G.B.T. INC. USA
- Address: 17358 Railroad Street, City of Industry, CA91748 USA
- Tel: +1-626-854-9338
The installation location of the power supply will be changed according to the case setting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>