Tregaskiss TOUGH GUN TA3 Robotic Air Cooled MIG Gun Owner’s Manual

Tregaskiss TOUGH GUN TA3 Robotic Air Cooled MIG Gun

Quick Specs

Duty Cycle Rating

• 100%: 350 amp with Mixed Gases
• Ratings are based on tests that comply with IEC 60974-7 standards Tregaskiss

Processes

• MIG (GMAW) Welding

Robots
ABB®, COMAU®, FANUC®, Kawasaki®, KUKA®, Yaskawa® Motoman®, OTC Daihen®, Nachi®, Panasonic®.

• Re-engineered neck clamp improves durability and consistency of clamping force
• Additional standard neck options expand the tool center point options and variety of working envelopes
• Direct replacement for TOUGH GUN® ThruArm™ G1 series robotic MIG guns
• Available as a complete package — from the power pin to the contact tip
• Wire brake, air blast and TOUGH GUN I.C.E.® technology are available options for select models

Designed with our unique and durable LSR+ (low-stress robotic) unicable, TOUGH GUN® TA3 robotic air-cooled MIG guns feed through the robot arm and provide outstanding precision and reliability. Conventional style unicables typically come with a connection that limits rotational capabilities and produces torsional stress in on the cable. Unlike conventional unicables, the LSR+ incorporates a rotating power connection that reduces this stress during rotation. Additionally, a protective external conduit contributes to cable longevity by shielding components from harsh welding environments .

System Components

System Components for all Robots excluding FANUC® Robots

System Components for FANUC® Robots

Specifications
Through-Arm Robotic Articulation Limits for LSR+ Unicables

Axis Articulation Limit

• 5 +/- 90°
• 4+6 +/- 270°

NOTE : Any articulation beyond these lmits is considered abuse of the cable and will accelerate LSR+ unicable wear.

Know Your Options

What’s the difference between clutch and solid mount?
A clutch mount is designed to trigger an emergency stop in the event of a robotic collision, whereas a solid mount is not equipped with this functionality. Although many of today’s robots are equipped with independent collision detection software and may not require this functionality in a robotic MIG gun, this option is sometimes selected during gun configuration as an additional safeguard.

Air Blast
Air blast utilizes compressed shop air to clear loose debris from front-end consumables thereby reducing the frequency of nozzle cleaning. 80-100 psi maximum air supply required for proper operation. This option is not available for TOUGH GUN® TA3 Robotic Air-Cooled MIG Guns for FANUC® robots equipped with TOUGH GUN I.C.E.® Technology.

Wire Brake
Wire brake holds wire to a consistent stick out to allow a repeatable tool center point (TCP) for touch sensing / seam tracking while the torch articulates. Selecting the wire brake option when configuring a gun will impact TCP. 40-60 psi maximum air supply is required for proper operation. Wire brake is available for wire sizes between 0.030” and 1/16”, and requires the use of a jump liner (for use with conventional liners). This option is not compatible with QUICK LOAD® Liners or the QUICK LOAD Liner AutoLength™ System.

TOUGH GUN I.C.E.® Technology
This technology boosts the duty cycle of our already highly robust air-cooled TOUGH GUN MIG Guns by providing water-cooled benefits through our I.C.E. (Integrated Cooling Enhancer) component. This component circulates water at the nozzle, keeping TOUGH LOCK® Consumables running cooler and lasting longer. In the TOUGH GUN TA3 Robotic MIG Gun Series, this option is available only for FANUC® and ABB® robots. TOUGH GUN I.C.E. Technology is not compatible with TOUGH ACCESS™ Consumables.

AccuLock™ R Consumables Eliminate contact tip cross-threading issues with AccuLock R Consumables. These new consumables are designed for increased tip life, which can reduce replacement frequency and related downtime. AccuLock HDP Contact Tips can increase life by an additional 6-10x longer in pulse welding applications. And in most cases, your current tip and diffuser can be replaced with no impact to Tool Center Point (TCP), making this upgrade low effort, low risk, and high payoff.

QUICK LOAD® Liners The QUICK LOAD Liner System loads from the front of the MIG gun, and requires less than half the time and effort for replacement when compared with conventional liners. These liners interface with a QUICK LOAD Liner Retainer that is seated within the power pin of the gun on first use. QUICK LOAD Liners come standard on TOUGH GUN® Robotic MIG Guns unless wire brake is a selected option. Available for wire sizes between 0.023” and 3/32” and in lengths of up to 15 feet for robotic applications.

Gun Configurations

NOTE : For Center Of Mass information, please visit Tregaskiss.com/TA3

Standard Configurations – Clutch

Clutch

Clutch with Wire Brake

Robot

| ****

Model

| ****

Neck

| ****

Neck Angle

| Clutch| Clutch with Wire Brake
---|---|---|---|---|---
TCP (mm)| TCP (mm)
A1| A2| A3| B1| B2| A1| A2| A3| B1| B2

COMAU®

| ****

Smart5 Arc6

| 405-22QC| 22| –| 414| –| 47| –| –| 451| –| 47| –
405-22QCL| 22| –| 472| –| 47| –| –| 509| –| 47| –
405-22QCL1| 22| –| 527| –| 47| –| –| 564| –| 47| –
405-45QC| 45| –| 367| –| –| 100| –| 403| –| –| 100
405-45QCL| 45| –| 414| –| –| 120| –| 451| –| –| 120
405-45QCL1| 45| –| 469| –| –| 120| –| 506| –| –| 120
405-45QCL2| 45| –| 519| –| –| 120| –| 556| –| –| 120

Kawasaki®

| ****

BA006N, BA006L

| 405-22QC| 22| –| –| 488| 47| –| –| –| 525| 47| –
405-22QCL| 22| –| –| 545| 47| –| –| –| 582| 47| –
405-22QCL1| 22| –| –| 601| 47| –| –| –| 638| 47| –
405-45QC| 45| –| –| 440| –| 100| –| –| 477| –| 100
405-45QCL| 45| –| –| 487| –| 120| –| –| 524| –| 120
405-45QCL1| 45| –| –| 542| –| 120| –| –| 579| –| 120
405-45QCL2| 45| –| –| 592| –| 120| –| –| 629| –| 120

KUKA®

| ****

KR 5 HW,

KR 16 L8 HW

| 405-22QC| 22| 403| –| –| 47| –| 440| –| –| 47| –
405-22QCL| 22| 461| –| –| 47| –| 498| –| –| 47| –
405-22QCL1| 22| 516| –| –| 47| –| 553| –| –| 47| –
405-45QC| 45| 355| –| –| –| 100| 391| –| –| –| 100
405-45QCL| 45| 402| –| –| –| 120| 438| –| –| –| 120
405-45QCL1| 45| 458| –| –| –| 120| 493| –| –| –| 120
405-45QCL2| 45| 508| –| –| –| 120| 543| –| –| –| 120

KUKA

| ****

KR 16 arc HW

| 405-22QC| 22| –| 414| –| 47| –| –| 451| –| 47| –
405-22QCL| 22| –| 473| –| 47| –| –| 509| –| 47| –
405-22QCL1| 22| –| 527| –| 47| –| –| 564| –| 47| –
405-45QC| 45| –| 367| –| –| 100| –| 403| –| –| 100
405-45QCL| 45| –| 414| –| –| 120| –| 450| –| –| 120
405-45QCL1| 45| –| 469| –| –| 120| –| 506| –| –| 120
405-45QCL2| 45| –| 519| –| –| 120| –| 556| –| –| 120

KUKA

| ****

KR8 R1420HW, KR8 R1620HW, KR8 R2100HW, KR6 R1820HW

| 405-22QC| 22| –| –| 516| 47| –| –| –| 553| 47| –
405-22QCL| 22| –| –| 574| 47| –| –| –| 611| 47| –
405-22QCL1| 22| –| –| 629| 47| –| –| –| 666| 47| –
405-45QC| 45| –| –| 469| –| 100| –| –| 505| –| 100
405-45QCL| 45| –| –| 516| –| 120| –| –| 553| –| 120
405-45QCL1| 45| –| –| 571| –| 120| –| –| 608| –| 120
405-45QCL2| 45| –| –| 621| –| 120| –| –| 658| –| 120

Yaskawa® Motoman®

| ****

All models except MA1440, AR1440, MH12, MA2010, AR2010, MA3120, AR3120, MH24 and AR1730

| 405-22QC| 22| 403| –| –| 47| –| 440| –| –| 47| –
405-22QCL| 22| 461| –| –| 47| –| 498| –| –| 47| –
405-22QCL1| 22| 516| –| –| 47| –| 553| –| –| 47| –
405-45QC| 45| 355| –| –| –| 100| 392| –| –| –| 100
405-45QCL| 45| 402| –| –| –| 120| 439| –| –| –| 120
405-45QCL1| 45| 458| –| –| –| 120| 495| –| –| –| 120
405-45QCL2| 45| 508| –| –| –| 120| 545| –| –| –| 120

Standard Configurations – Clutch (Continued)

Robot

| ****

Model

| ****

Neck

| ****

Neck Angle

| Clutch| Clutch with Wire Brake|
---|---|---|---|---|---|---
TCP (mm)| TCP (mm)|
A1| A2| A3| B1| B2| A1| A2| A3| B1| B2|
 | ****

MA1440, AR1440, MH12, MA2010, AR2010, MA3120, AR3120, MH24, AR1730

| 405-22QC| 22| –| –| 508| 47| –| –| –| 545| 47| –|
 | 405-22QCL| 22| –| –| 566| 47| –| –| –| 603| 47| –|

Yaskawa®

| 405-22QCL1| 22| –| –| 621| 47| –| –| –| 658| 47| –|
405-45QC| 45| –| –| 460| –| 100| –| –| 497| –| 100|
Motoman®|
405-45QCL| 45| –| –| 507| –| 120| –| –| 544| –| 120|
 | 405-45QCL1| 45| –| –| 563| –| 120| –| –| 600| –| 120|
 | 405-45QCL2| 45| –| –| 613| –| 120| –| –| 649| –| 120|

OTC Daihen®

| ****

AX-V4, AX-V4L

| 405-22QC| 22| 403| –| –| 47| –| 439| –| –| 47| –|
405-22QCL| 22| 461| –| –| 47| –| 497| –| –| 47| –|
405-22QCL1| 22| 516| –| –| 47| –| 552| –| –| 47| –|
405-45QC| 45| 355| –| –| –| 100| 391| –| –| –| 100|
405-45QCL| 45| 402| –| –| –| 120| 439| –| –| –| 120|
405-45QCL1| 45| 458| –| –| –| 120| 494| –| –| –| 120|
405-45QCL2| 45| 508| –| –| –| 120| 554| –| –| –| 120|
 |  | 405-22QC| 22| –| 413| –| 47| –| –| 449| –| 47| –|
 | OTC Daihen:| 405-22QCL| 22| –| 471| –| 47| –| –| 507| –| 47| –|
 | AII B4, AII B4L,| 405-22QCL1| 22| –| 526| –| 47| –| –| 563| –| 47| –|
OTC Daihen /| FD B4, FD B4L|
405-45QC| 45| –| 365| –| –| 100| –| 402| –| –| 100|
Nachi®|  |
405-45QCL| 45| –| 412| –| –| 120| –| 449| –| –| 120|
 | Nachi:|
 | NB04, NB04L|
405-45QCL1| 45| –| 467| –| –| 120| –| 504| –| –| 120|
 |  | 405-45QCL2| 45| –| 517| –| –| 120| –| 554| –| –| 120|
 |  | 405-22QC| 22| –| –| 503| 47| –| –| –| 540| 47| –|
 | OTC Daihen:| 405-22QCL| 22| –| –| 561| 47| –| –| –| 597| 47| –|
405-22QCL1| 22| –| –| 616| 47| –| –| –| 653| 47| –|

OTC Daihen / Nachi

| FD B6, FD B6L|
405-45QC| 45| –| –| 455| –| 100| –| –| 492| –| 100|
 |
 | Nachi:|
405-45QCL| 45| –| –| 502| –| 120| –| –| 539| –| 120|
 | NB6, NB6L|
405-45QCL1| 45| –| –| 557| –| 120| –| –| 594| –| 120|
 |  | 405-45QCL2| 45| –| –| 607| –| 120| –| –| 644| –| 120|

Panasonic®

| ****

TB1800WGIII

| 405-22QC| 22| 403| –| –| 47| –| 440| –| –| 47| –|
405-22QCL| 22| 461| –| –| 47| –| 498| –| –| 47| –|
405-22QCL1| 22| 516| –| –| 47| –| 553| –| –| 47| –|
405-45QC| 45| 355| –| –| –| 100| 392| –| –| –| 100|
405-45QCL| 45| 402| –| –| –| 120| 439| –| –| –| 120|
405-45QCL1| 45| 458| –| –| –| 120| 495| –| –| –| 120|
405-45QCL2| 45| 508| –| –| –| 120| 545| –| –| –| 120|
 |  | 405-22QC| 22| –| –| 471| 47| –| –| –| 508| 47| –|
 | TM-1100,| 405-22QCL| 22| –| –| 529| 47| –| –| –| 566| 47| –|
405-22QCL1| 22| –| –| 584| 47| –| –| –| 621| 47| –|
 | TM-1400,|
405-45QC| 45| –| –| 423| –| 100| –| –| 460| –| 100|
Panasonic| TM-1600,|
 | TM-1800,|
405-45QCL| 45| –| –| 470| –| 120| –| –| 507| –| 120|
 | TM-2000|
405-45QCL1| 45| –| –| 526| –| 120| –| –| 563| –| 120|
 |  | 405-45QCL2| 45| –| –| 576| –| 120| –| –| 613| –| 120|

NOTE : For Center Of Mass information, please visit Tregaskiss.com/TA3

Standard Configurations – Solid Mount

Robot

| ****

Model

| ****

Neck

| ****

Neck Angle

| Solid Mount| Solid Mount with Wire Brake
---|---|---|---|---|---
TCP (mm)| TCP (mm)
A1| A2| A3| B1| B2| A1| A2| A3| B1| B2

ABB®

| ****

IRB1600ID, IRB1520ID

| 405-22QC| 22| –| 356| –| 47| –| –| 392| –| 47| –
405-22QCL| 22| –| 414| –| 47| –| –| 450| –| 47| –
405-22QCL1| 22| –| 470| –| 47| –| –| 505| –| 47| –
405-45QC| 45| –| 309| –| –| 100| –| 345| –| –| 100
405-45QCL| 45| –| 356| –| –| 120| –| 392| –| –| 120
405-45QCL1| 45| –| 411| –| –| 120| –| 447| –| –| 120
405-45QCL2| 45| –| 461| –| –| 120| –| 497| –| –| 120

ABB

| ****

IRB2600ID, IRB1660ID

| 405-22QC| 22| –| 359| –| 47| –| –| 395| –| 47| –
405-22QCL| 22| –| 417| –| 47| –| –| 453| –| 47| –
405-22QCL1| 22| –| 472| –| 47| –| –| 508| –| 47| –
405-45QC| 45| –| 309| –| –| 100| –| 347| –| –| 100
405-45QCL| 45| –| 356| –| –| 120| –| 394| –| –| 120
405-45QCL1| 45| –| 411| –| –| 120| –| 450| –| –| 120
405-45QCL2| 45| –| 461| –| –| 120| –| 500| –| –| 120

FANUC®

| 100iC, 100iC-12,

100iC-6L,

100iC-7L,

100iC-8L, 120iC,

120iC-10L,

120iC-12L M10iA-6L, M10iA-7L, M10iA-12

| 405-22QC| 22| –| –| 386| 47| –| –| –| 421| 47| –
405-22QCL| 22| –| –| 443| 47| –| –| –| 479| 47| –
405-22QCL1| 22| –| –| 499| 47| –| –| –| 534| 47| –
405-45QC| 45| –| –| 338| –| 100| –| –| 373| –| 100
405-45QCL| 45| –| –| 385| –| 120| –| –| 420| –| 120
405-45QCL1| 45| –| –| 440| –| 120| –| –| 475| –| 120
405-45QCL2| 45| –| –| 490| –| 120| –| –| 525| –| 120

FANUC

| ****

100iD,

100iD-12,

100iD-8L,

100iD-10L, 120iD,

120iD-12L

| 405-22QC| 22| –| –| 461| 47| –| –| –| 461| 47| –
405-22QCL| 22| –| –| 519| 47| –| –| –| 519| 47| –
405-22QCL1| 22| –| –| 574| 47| –| –| –| 574| 47| –
405-45QC| 45| –| –| 413| –| 100| –| –| 413| –| 100
405-45QCL| 45| –| –| 460| –| 120| –| –| 460| –| 120
405-45QCL1| 45| –| –| 516| –| 120| –| –| 516| –| 120
405-45QCL2| 45| –| –| 566| –| 120| –| –| 566| –| 120

Kawasaki®

| ****

BA006N, BA006L

| 405-22QC| 22| –| –| 432| 47| –| –| –| 467| 47| –
405-22QCL| 22| –| –| 489| 47| –| –| –| 525| 47| –
405-22QCL1| 22| –| –| 545| 47| –| –| –| 580| 47| –
405-45QC| 45| –| –| 384| –| 100| –| –| 420| –| 100
405-45QCL| 45| –| –| 431| –| 120| –| –| 467| –| 120
405-45QCL1| 45| –| –| 486| –| 120| –| –| 522| –| 120
405-45QCL2| 45| –| –| 536| –| 120| –| –| 572| –| 120

Kawasaki

| ****

BA013N, BA013L

| 405-22QC| 22| –| –| 450| 47| –| –| –| –| –| –
405-22QCL| 22| –| –| 507| 47| –| –| –| –| –| –
405-22QCL1| 22| –| –| 563| 47| –| –| –| –| –| –
405-45QC| 45| –| –| 402| –| 101| –| –| –| –| –
405-45QCL| 45| –| –| 449| –| 121| –| –| –| –| –
405-45QCL1| 45| –| –| 504| –| 121| –| –| –| –| –
405-45QCL2| 45| –| –| 554| –| 121| –| –| –| –| –

Robot

| ****

Model

| ****

Neck

| ****

Neck Angle

| Solid Mount| Solid Mount with Wire Brake
---|---|---|---|---|---
TCP (mm)| TCP (mm)
A1| A2| A3| B1| B2| A1| A2| A3| B1| B2

KUKA®

| ****

KR5 HW, KR16 L8 HW

| 405-22QC| 22| 346| –| –| 47| –| 383| –| –| 47| –
405-22QCL| 22| 405| –| –| 47| –| 441| –| –| 47| –
405-22QCL1| 22| 460| –| –| 47| –| 496| –| –| 47| –
405-45QC| 45| 299| –| –| –| 100| 335| –| –| –| 100
405-45QCL| 45| 346| –| –| –| 120| 382| –| –| –| 120
405-45QCL1| 45| 402| –| –| –| 120| 437| –| –| –| 120
405-45QCL2| 45| 452| –| –| –| 120| 487| –| –| –| 120

KUKA

| ****

KR16 arc HW

| 405-22QC| 22| –| 358| –| 47| –| –| 394| –| 47| –
405-22QCL| 22| –| 416| –| 47| –| –| 452| –| 47| –
405-22QCL1| 22| –| 471| –| 47| –| –| 507| –| 47| –
405-45QC| 45| –| 310| –| –| 100| –| 346| –| –| 100
405-45QCL| 45| –| 358| –| –| 120| –| 393| –| –| 120
405-45QCL1| 45| –| 413| –| –| 120| –| 449| –| –| 120
405-45QCL2| 45| –| 463| –| –| 120| –| 499| –| –| 120

KUKA

| ****

KR8 R1420HW, KR8 R1620HW, KR8 R2100HW, KR6 R1820HW

| 405-22QC| 22| –| –| 459| 47| –| –| –| 495| 47| –
405-22QCL| 22| –| –| 517| 47| –| –| –| 553| 47| –
405-22QCL1| 22| –| –| 572| 47| –| –| –| 608| 47| –
405-45QC| 45| –| –| 412| –| 100| –| –| 447| –| 100
405-45QCL| 45| –| –| 459| –| 120| –| –| 494| –| 120
405-45QCL1| 45| –| –| 514| –| 120| –| –| 550| –| 120
405-45QCL2| 45| –| –| 564| –| 120| –| –| 600| –| 120

Yaskawa® Motoman®

| ****

All models except MA1440, AR1440, MH12, MA2010, AR2010, MA3120, AR3120, MH24 and AR1730

| 405-22QC| 22| 347| –| –| 47| –| 383| –| –| 47| –
405-22QCL| 22| 405| –| –| 47| –| 441| –| –| 47| –
405-22QCL1| 22| 460| –| –| 47| –| 496| –| –| 47| –
405-45QC| 45| 299| –| –| –| 100| 335| –| –| –| 100
405-45QCL| 45| 346| –| –| –| 120| 382| –| –| –| 120
405-45QCL1| 45| 402| –| –| –| 120| 438| –| –| –| 120
405-45QCL2| 45| 452| –| –| –| 120| 487| –| –| –| 120

Yaskawa® Motoman®

| ****

MA1440, AR1440, MH12, MA2010, AR2010, MA3120, AR3120, MH24, AR1730

| 405-22QC| 22| –| –| 452| 47| –| –| –| 488| 47| –
405-22QCL| 22| –| –| 510| 47| –| –| –| 546| 47| –
405-22QCL1| 22| –| –| 565| 47| –| –| –| 601| 47| –
405-45QC| 45| –| –| 404| –| 100| –| –| 440| –| 100
405-45QCL| 45| –| –| 451| –| 120| –| –| 487| –| 120
405-45QCL1| 45| –| –| 507| –| 120| –| –| 543| –| 120
405-45QCL2| 45| –| –| 557| –| 120| –| –| 593| –| 120

Robot

| ****

Model

| ****

Neck

| ****

Neck Angle

| Solid Mount| Solid Mount with Wire Brake
---|---|---|---|---|---
TCP (mm)| TCP (mm)
A1| A2| A3| B1| B2| A1| A2| A3| B1| B2

Panasonic®

| ****

TM-1100, TM-1400, TM-1600, TM-1800, TM-2000

| 405-22QC| 22| –| –| 415| 47| –| –| –| 451| 47| –
405-22QCL| 22| –| –| 473| 47| –| –| –| 509| 47| –
405-22QCL1| 22| –| –| 528| 47| –| –| –| 564| 47| –
405-45QC| 45| –| –| 367| –| 100| –| –| 403| –| 100
405-45QCL| 45| –| –| 414| –| 120| –| –| 450| –| 120
405-45QCL1| 45| –| –| 470| –| 120| –| –| 505| –| 120
405-45QCL2| 45| –| –| 520| –| 120| –| –| 555| –| 120

Panasonic

| ****

TB1800WGIII

| 405-22QC| 22| 347| –| –| 47| –| 386| –| –| 47| –
405-22QCL| 22| 405| –| –| 47| –| 444| –| –| 47| –
405-22QCL1| 22| 460| –| –| 47| –| 499| –| –| 47| –
405-45QC| 45| 299| –| –| –| 100| 338| –| –| –| 100
405-45QCL| 45| 346| –| –| –| 120| 385| –| –| –| 120
405-45QCL1| 45| 402| –| –| –| 120| 440| –| –| –| 120
405-45QCL2| 45| 452| –| –| –| 120| 490| –| –| –| 120

Robot Make and Model Options
Note : The 3-digit character selections provided for the following available robot makes and models are intended for use when configuring a TOUGH GUN TA3 MIG Gun part number (see Ordering Information on page 18).

Consumable Options

AccuLockTM Heavy Duty (HD) Copper Contact Tips

• T-A030CH* for 0.030” (0.8 mm) wire; qty. 10
• T-A062CH for 1/16″ (1.6 mm) wire; qty. 10
• T-A035CH* for 0.035” (0.9 mm) wire; qty. 10
• T-A072CH for 0.070″ (1.8 mm) wire; qty. 10
• T-A039CH* for 0.039″ (1.0 mm) wire; qty. 10
• T-A078CH for 5/64″ (2.0 mm) wire; qty. 10
• T-A045CH* for 0.045″ (1.2 mm) wire; qty. 10
• T-A094CH for 3/32″ (2.4 mm) wire; qty. 10
• T-A052CH* for 0.052″ (1.3 mm) wire; qty. 10
  NOTE : add “-100” to end of the above HD copper contact tip part numbers for quantities of 100. add “-1000” to end of the above part numbers for quantities of 1000.

AccuLock Heavy Duty (HD) Chrome Zirconium Contact Tips

• T-A030ZH for 0.030” (0.8 mm) wire; qty. 10
• T-A045ZH for 0.045″ (1.2 mm) wire; qty. 10
• T-A035ZH for 0.035” (0.9 mm) wire; qty. 10
• T-A052ZH for 0.052” (1.3 mm); qty. 10
• T-A039ZH for 0.039″ (1.0 mm) wire; qty. 10
• T-A062ZH 1/16” (1.6 mm); qty. 10
  NOTE : add “-100” to the end of the above HD chrome zirconium contact tip part numbers for quantities of 100.

AccuLock HDP Contact Tips

• T-A035WH for 0.035” (0.9 mm) wire; qty. 10
• T-A045WH for 0.045″ (1.2 mm) wire; qty. 10
• T-A039WH for 0.039” (1.0 mm) wire; qty. 10
• T-A052WH for 0.052″ (1.3 mm) wire; qty. 10
  NOTE : add “-100” to the end of the above HDP contact tip part numbers for quantities of 100.

AccuLock Teach Pointers (used for robotic programming)

• T-A001TP Adjustable teach pointer
• T-A075TP Teach pointer, 3/4″ CTWD
• T-A050TP Teach pointer, 1/2″ CTWD
• T-A10MTP Teach pointer, 10 mm CTWD
• T-A062TP Teach pointer, 5/8” CTWD
• T-A15MTP Teach pointer, 15 mm CTWD

AccuLock R Gas Diffusers

• D-ATTH Gas diffuser, thread-on, AccuLock R
• D-ATSH Gas diffuser, slip-on, AccuLock R
  NOTE : add “-100” to the end of the above gas diffuser part numbers for quantities of 100.

TOUGH LOCK® Heavy Duty (HD) Contact Tips

• 403-20-30 for 0.030” (0.8 mm) wire
• 403-20-1.4 for 0.055″ (1.4 mm) wire
• 403-20-35 for 0.035” (0.9 mm) wire
• 403-20-116 for 1/16” (1.6 mm) wire
• 403-20-1.0 for 0.040″ (1.0 mm) wire 403-20-1.8 for 0.070″ (1.8 mm) wire
• 403-20-45 for 0.045” (1.2 mm) wire
• 403-20-78 for 0.078” (2.0 mm) wire
• 403-20-364 for 3/64” (1.2 mm) wire
• 403-20-564 for 5/64” (2.0 mm) wire
• 403-20-52 for 0.052” (1.3 mm) wire
• 403-20-332 for 3/32” (2.4 mm) wire

TOUGH LOCK Heavy Duty Tapered Contact Tips

• 403-21-30 for 0.030” (0.8 mm) wire
• 403-21-35 for 0.035” (0.9 mm) wire
• 403-21-1.0 for 0.040″ (1.0 mm) wire
• 403-21-45 for 0.045” (1.2 mm) wire
• 403-21-52 for 0.052” (1.3 mm) wire
• 403-21-116 for 1/16” (1.6 mm) wire

TOUGH LOCK Extended Life Heavy Duty (EHD) Contact Tips

• 403-27-30 for 0.030” (0.8 mm) wire
• 403-27-35 for 0.035” (0.9 mm) wire
• 403-27-1.0 for 0.040″ (1.0 mm) wire
• 403-27-45 for 0.045” (1.2 mm) wire
• 403-27-364 for 3/64” (1.2 mm) wire

TOUGH LOCK Standard Duty (SD) Contact Tips

• 403-14-30 for 0.030” (0.8 mm) wire
• 403-14-35 for 0.035” (0.9 mm) wire
• 403-14-45 for 0.045″ (1.2 mm) wire

TOUGH LOCK Standard Duty Tapered Contact Tips

• 403-12-30 for 0.030” (0.8 mm) wire
• 403-12-35 for 0.035” (0.9 mm) wire
• 403-12-1.0 for 0.040″ (1.0 mm) wire
• 403-12-45 for 0.045” (1.2 mm) wire

TOUGH LOCK Teach Tips (used for robotic programming)

• 403-20-01 Adjustable teach tip
• 403-20-05 Teach tip 1/2″ CTWD
• 403-20-062 Teach tip 5/8” CTWD
• 403-20-075 Teach tip 3/4″ CTWD
• 403-20-10mm Teach tip 10 mm CTWD
• 403-20-15mm Teach tip 15 mm CTWD

TOUGH LOCK Retaining Heads

• 404-18 SD – retaining head for slip-on nozzles
• 404-52 HD – retaining head for thread-on nozzles
• 404-32 HD – retaining head for slip-on nozzles

Nozzles

Part Number| Description| Style| TOUGH LOCK| AccuLock R
---|---|---|---|---
401-6-62| HD – 5/8″ bore, 1/8″ recess (copper)| Slip-on| X| X
401-81-62| HD – 5/8” bore, 1/8” stick out (copper)| Slip-on| X| X
401-4-62| SD – 5/8” bore, 1/8” recess (copper)| Slip-on| X| X
401-8-62| SD – 5/8″ bore, 1/8″ stick out (copper)| Slip-on| X| X
401-42-50| SD – 1/2″ bore, 1/8” recess (bottleneck, brass)| Slip-on| X| –
401-48-50| SD – 1/2″ bore, 1/8” stick out (bottleneck, brass)| Slip-on| X| –
401-48-62| HD – 5/8” bore, flush tip (bottleneck, copper)| Slip-on| X| X
401-44-50| SD – 1/2″ bore, 1/4″ stick out (bottleneck, brass)| Slip-on| X| –
401-49-50| HD – 1/2″ bore, flush tip (bottleneck, brass)| Slip-on| X| –
401-71-62| HD – 5/8” bore, 1/8” recess (brass), straight bore| Slip-on| –| X
401-87-62| HD – 5/8” bore, 1/8” stick out (brass)| Slip-on| X| X
401-14-62| HD – 5/8″ bore, 1/8″ recess (copper)| Thread-on| X| X
401-41-62| HD – 5/8″ bore, 1/8″ stick out (brass)| Thread-on| X| –
401-53-62| HD – 5/8″ bore, 1/8″ stick out (bottleneck, copper)| Thread- on| X| –
401-20-62| HD – 5/8″ bore, 1/8″ stick out (copper)| Thread-on| X| X
401-43-62| SD – 5/8″ bore, 1/8″ recess (copper)| Thread-on| X| X
401-18-62| SD – 5/8″ bore, 1/8″ stick out (copper)| Thread-on| X| X
401-30-62| SD – 5/8″ bore, 1/8″ stick out (bottleneck, brass)| Slip-on| X| X
401-30-62T| SD – 5/8″ bore, 1/8″ stick out (bottleneck, brass)| Thread- on| X| X

See the TOUGH LOCK Consumables spec sheet (SP-TLC) for more options

Consumable Options

QUICK LOAD® Liners

• 415-26 QUICK LOAD Liner Retainer
• 415-24 QUICK LOAD Liner Retainer (required for 3/32” wire)
• 415-35-6Q QUICK LOAD Liner for 0.035” (0.9 mm) – 0.045” (1.2 mm) wire; 6’ (1.8 m)
• 415-35-10Q QUICK LOAD Liner for 0.035” (0.9 mm) – 0.045” (1.2 mm) wire; 10’ (3.05 m)
• 415-35-15Q QUICK LOAD Liner for 0.035” (0.9 mm) – 0.045” (1.2 mm) wire; 15’ (4.5 m)
• 415-116-6Q QUICK LOAD Liner for 0.052” (1.3 mm) – 1/16” (1.6 mm) wire; 6’ (1.8 m)
• 415-116-10Q QUICK LOAD Liner for 0.052” (1.3 mm) – 1/16” (1.6 mm) wire; 10’ (3.05 m)
• 415-116-15Q QUICK LOAD Liner for 0.052” (1.3 mm) – 1/16” (1.6 mm) wire; 15’ (4.5 m)

QUICK LOAD E-Z Feed ™ Liners

• 415-31 QUICK LOAD Liner Retainer (required for 415-116-062Q liner)
• 415-35-062Q QUICK LOAD Liner for 0.035″ (0.9 mm) – 0.045″ (1.2 mm) cored wire; 6′ (1.8 m) (requires 415-26 retainer)
• 415-116-062Q QUICK LOAD Liner for 0.045″ (1.2 mm) – 1/16″ (1.6 mm) cored wire; 6′ (1.8 m) (requires 415-31 retainer)

Conventional Liners (required for MIG guns equipped with wire brake only)

• 415-30-6 for 0.030” (0.8 mm) wire; 6’ (1.8 m) – round wound
• 415-30-15 for 0.030” (0.8 mm) wire; 15’ (4.5 m) – round wound
• 415-35-6 for 0.035” (0.9 mm) – 0.045” (1.2 mm) wire; 6’ (1.8 m) – round wound
• 415-35-10 for 0.035” (0.9 mm) – 0.045” (1.2 mm) wire; 10’ (3.05 m) – round wound
• 415-35-15 for 0.035” (0.9 mm) – 0.045” (1.2 mm) wire; 15’ (4.5 m) – round wound
• 415-116-6 for 0.052” (1.3 mm) – 1/16” (1.6 mm) wire; 6’ (1.8 m) – round wound
• 415-116-10 for 0.052” (1.3 mm) – 1/16” (1.6 mm) wire; 10’ (3.05 m) – round wound
• 415-116-15 for 0.052” (1.3 mm) – 1/16” (1.6 mm) wire; 15’ (4.5 m) – round wound
• 415-564-6 for 1/16” (1.6 mm) – 5/64” (2.0 mm) wire; 6’ (1.8 m) – round wound
• 415-564-15 for 1/16” (1.6 mm) – 5/64” (2.0 mm) wire; 15’ (4.5 m) – flat wound
• 415-332-6 for 0.078” (2.0 mm) – 3/32” (2.4 mm) wire; 6’ (1.8 m) – flat wound
• 415-332-15 for 0.078” (2.0 mm) – 3/32” (2.4 mm) wire; 15’ (4.5 m) – flat wound

Jump Liners (required for MIG guns equipped with wire brake only; to be used with conventional liners)

• 495-18-35 for 0.035” (0.9 mm) – 0.045” (1.2 mm) wire; 26”
• 495-18-116 for 0.045” (1.2 mm) – 1/16” (1.6 mm) wire; 26”

Components

Air-Cooled Necks

• 405-22QC 22 degree neck, short length
• 405-22QCL 22 degree neck, medium length
• 405-22QCL1 22 degree neck, long length
• 405-45QC 45 degree neck, short length
• 405-45QCL 45 degree neck, medium length
• 405-45QCL1* 45 degree neck, long length
• 405-45QCL2* 45 degree neck, extended length

TOUGH GUN I.C.E.™ Necks

• 590-22-XXXX 22 degree neck, short length
• 590-22L-XXXX 22 degree neck, medium length
• 590-22L1-XXXX 22 degree neck, long length
• 590-45-XXXX 45 degree neck, short length
• 590-45L-XXXX* 45 degree neck, medium length
• 590-45L1-XXXX* 45 degree neck, long length
• 590-45L2-XXXX* 45 degree neck, extended length
• Non-configurable neck option
• NOTE : XXXX in the part numbers above represent nozzle O.D.; i.e. 590-22-0.938 = 0.938” O.D., 590-45L1-1.106 = 1.106” O.D. (refer to the O.D. column in the TOUGH LOCK Consumables spec sheet (SP-TLC) for more information)

LSR+ (Low-Stress Robotic) Unicables
NOTE : LSR+ unicable part numbers are determined by gun model type, robot brand, robot model, and gun options.

Please find the LSR+ unicable part number you require from the appropriate chart provided:

• For Clutch models…………………………………………………………………………………………………………..page 11
• For Clutch models (equipped with TOUGH GUN I.C.E.™ Technology)………………………………….page 12
• For Clutch models (Euro)…………………………………………………………………………………………………page 12
• For Clutch models (Euro; equipped with TOUGH GUN I.C.E. Technology)……………………………..page 13
• For Solid Mount models…………………………………………………………………………………………………..page 13
• For Solid Mount models (equipped with TOUGH GUN I.C.E. Technology)………………………….page 14
• For Solid Mount models (Euro)…………………………………………………………………………………………page 15
• For Solid Mount models (Euro; equipped with TOUGH GUN I.C.E. Technology)……………………..page 15

LSR+ (Low-Stress Robotic) Unicables – Clutch

Robot Brand

| ****

Robot Model

| LSR+ Unicable Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
COMAU®| Smart5 Arc6| 58CM002| 58CM002A| 58CM002W| 58CM002AW
Kawasaki®| BA006N| 58CKW042| 58CKW042A| 58CKW042W| 58CKW042AW
Kawasaki| BA006L| M58CKW045| M58CKW045A| M58CKW045W| M58CKW045AW
KUKA®| KR 5 arc HW| 58CK023| 58CK023A| 58CK023W| 58CK023AW
KUKA| KR 16 L8 HW| 58CK027| 58CK027A| 58CK027W| 58CK027AW
KUKA| KR 16 arc HW| 58CK030| 58CK030A| 58CK030W| 58CK030AW
KUKA| KR6 R1820HW| M58CK031| M58CK031A| M58CK031W| M58CK031AW
KUKA^| KR8 R1820HW| L58CK031^| L58CK031A^| L58CK031W^| L58CK031AW^
KUKA^^| KR8 R1420HW, KR8 R1620HW| MC58CK032^^| MC58CK032A^^| MC58CK032W^^| MC58CK032AW^^
KUKA^| KR8 R1420HW, KR8 R1620HW| L58CK032^| L58CK032A^| L58CK032W^| L58CK032AW^
KUKA^^| KR8 R2100HW| MC58CK033^^| MC58CK033A^^| MC58CK033W^^| MC58CK033AW^^
KUKA^| KR8 R2100HW| L58CK033^| L58CK033A^| L58CK033W^| L58CK033AW^
Motoman®| EA1400 XRC| 58CM016| 58CM016A| 58CM016W| 58CM016AW
Motoman| EA1900 XRC| 58CM017| 58CM017A| 58CM017W| 58CM017AW
Motoman| EA1400N, SSA2000, MA1400, VA1400| 58CM001| 58CM001A| 58CM001W| 58CM001AW
Motoman| MA1440, AR1440, MH12| 58CM035| 58CM035A| 58CM035W| 58CM035AW
Motoman| EA1900N| 58CM002| 58CM002A| 58CM002W| 58CM002AW
Motoman| MA2010, AR2010| 58CM038| 58CM038A| 58CM038W| 58CM038AW
Motoman| MA3100, MA3120, AR3120| 58CM031| 58CM031A| 58CM031W| 58CM031AW
Motoman| MH24, AR1730| 58CM039| 58CM039A| 58CM039W| 58CM039AW
Nachi®| NB04| 58CD036| 58CD036A| 58CD036W| 58CD036AW
Nachi| NB04L| 58CD037| 58CD037A| 58CD037W| 58CD037AW
Nachi| NB6| 58CD038| 58CD038A| 58CD038W| 58CD038AW
Nachi| NB6L| 58CD050| 58CD050A| 58CD050W| 58CD050AW

• Only available for use with a Panasonic® power pin
• Only available for use with a Lincoln® power pin
• Only available for use with a Miller® power pin w/Miller Auto-Axcess® feeder
• Only available for use with a Miller power pin w/Miller Auto-Continuum® feeder

__

Robot Brand

| __

Robot Model

| LSR+ Unicable Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
OTC Daihen®| AII-B4| 58CD025| 58CD025A| 58CD025W| 58CD025AW
OTC Daihen| AII-B4L| 58CD026| 58CD026A| 58CD026W| 58CD026AW
OTC Daihen| AX-V4| 58CD003| 58CD003A| 58CD003W| 58CD003AW
OTC Daihen| AX-V4L| 58CD022| 58CD022A| 58CD022W| 58CD022AW
OTC Daihen| FD B4| 58CD036| 58CD036A| 58CD036W| 58CD036AW
OTC Daihen| FD B4L| 58CD037| 58CD037A| 58CD037W| 58CD037AW
OTC Daihen| FD B6| 58CD038| 58CD038A| 58CD038W| 58CD038AW
OTC Daihen| FD B6L| 58CD050| 58CD050A| 58CD050W| 58CD050AW
Panasonic®| TB1800WGIII| 58CP034| 58CP034A| 58CP034W| 58CP034AW
Panasonic| TM-1100, TM-1400| P58CP037| P58CP037A| P58CP037W| P58CP037AW
Panasonic| TM-1600| P58CP039| P58CP039A| P58CP039W| P58C9039AW
Panasonic| TM-1800| P58CP039| P58CP039A| P58CP039W| P58CP039AW
Panasonic| TM-2000| P58CP041| P58CP041A| P58CP041W| P58CP041AW
Panasonic| TM-1100, TM-1400| M58CP037| M58CP037A| M58CP037W| M58CP037AW
Panasonic| TM-1800| M58CP039| M58CP039A| M58CP039W| M58CP039AW
Panasonic| TM-1600| M58CP040| M58CP040A| M58CP040W| M58CP040AW
Panasonic| TM-2000| M58CP041| M58CP041A| M58CP041W| M58CP041AW
Panasonic^^| TM-1100, TM-1400| MC58CP037^^| MC58CP037A^^| MC58CP037W^^| MC58CP037AW^^
Panasonic^^| TM-1800| MC58CP039^^| MC58CP039A^^| MC58CP039W^^| MC58CP039AW^^
Panasonic^^| TM-1600| MC58CP040^^| MC58CP040A^^| MC58CP040W^^| MC58CP040AW^^
Panasonic^^| TM-2000| MC58CP041^^| MC58CP041A^^| MC58CP041W^^| MC58CP041AW^^

• Only available for use with a Panasonic® power pin
• Only available for use with a Lincoln® power pin
• Only available for use with a Miller® power pin w/Miller Auto-Axcess® feeder
• Only available for use with a Miller power pin w/Miller Auto-Continuum® feeder

LSR+ (Low-Stress Robotic) Unicables – Clutch (equipped with TOUGH GUN I.C.E.® Technology)

Robot Brand

| ****

Robot Model

| LSR+ Unicable Part Number (for TOUGH GUN I.C.E. Assembly)
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
Nachi®| NB04| I58CD036| I58CD036A| I58CD036W| I58CD036AW
Nachi| NB04L| I58CD037| I58CD037A| I58CD037W| I58CD037AW
OTC Daihen®| FD B4| I58CD036| I58CD036A| I58CD036W| I58CD036AW
OTC Daihen| FD B4L| I58CD037| I58CD037A| I58CD037W| I58CD037AW
Panasonic| TM-1100, TM-1400| IP58CP037| IP58CP037A| IP58CP037W| IP58CP037AW
Panasonic| TM-1800| IP58CP039| IP58CP039A| IP58CP039W| IP58CP039AW
Panasonic| TM-2000| IP58CP041| IP58CP041A| IP58CP041W| IP58CP041AW*
Panasonic| TM-1100, TM-1400| IM58CP037| IM58CP037A| IM58CP037W| IM58CP037AW
Panasonic| TM-1800| IM58CP039| IM58CP039A| IM58CP039W| IM58CP039AW
Panasonic| TM-1600| IM58CP040| IM58CP040A| IM58CP040W| IM58CP040AW
Panasonic| TM-2000| IM58CP041| IM58CP041A| IM58CP041W| IM58CP041AW
Panasonic^^| TM-1100, TM-1400| IMC58CP037^^| IMC58CP037A^^| IMC58CP037W^^| IMC58CP037AW^^
Panasonic^^| TM-1800| IMC58CP039^^| IMC58CP039A^^| IMC58CP039W^^| IMC58CP039AW^^
Panasonic^^| TM-1600| IMC58CP040^^| IMC58CP040A^^| IMC58CP040W^^| IMC58CP040AW^^
Panasonic^^| TM-2000| IMC58CP041^^| IMC58CP041A^^| IMC58CP041W^^| IMC58CP041AW^^

• Only available for use with a Panasonic® power pin
• Only available for use with a Miller power pin w/Miller Auto-Continuum® feeder
• Only available for use with a Miller® power pin w/Miller Auto-Axcess® feeder

LSR+ (Low-Stress Robotic) Unicables – Clutch (Euro)

Robot Brand

| ****

Robot Model

| Euro LSR+ Unicable Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
COMAU®| Smart5 Arc6| E58CM002| E58CM002A| E58CM002W| E58CM002AW
Kawasaki®| BA006N| E58CKW042| E58CKW042A| E58CKW042W| E58CKW042AW
KUKA®| KR 5 arc HW| E58CK023| E58CK023A| E58CK023W| E58CK023AW
KUKA| KR 16 L8 HW| E58CK027| E58CK027A| E58CK027W| E58CK027AW
KUKA| KR 16 arc HW| E58CK030| E58CK030A| E58CK030W| E58CK030AW
Motoman®| EA1400 XRC| E58CM016| E58CM016A| E58CM016W| E58CM016AW
Motoman| EA1900 XRC| E58CM017| E58CM017A| E58CM017W| E58CM017AW
Motoman| EA1400N, SSA2000, MA1400, VA1400| E58CM001| E58CM001A| E58CM001W| E58CM001AW
Motoman| MA1440, AR1440, MH12| E58CM035| E58CM035A| E58CM035W| E58CM035AW
Motoman| EA1900N| E58CM002| E58CM002A| E58CM002W| E58CM002AW
Motoman| MA2010, AR2010| E58CM038| E58CM038A| E58CM038W| E58CM038AW
Motoman| MA3100, MA3120, AR3120| E58CM031| E58CM031A| E58CM031W| E58CM031AW
Motoman| MH24, AR1730| E58CM039| E58CM039A| E58CM039W| E58CM039AW
Nachi®| NB04| E58CD036| E58CD036A| E58CD036W| E58CD036AW
Nachi| NB04L| E58CD037| E58CD037A| E58CD037W| E58CD037AW
OTC Daihen®| AII-B4| E58CD025| E58CD025A| E58CD025W| E58CD025AW
OTC Daihen| AII-B4L| E58CD026| E58CD026A| E58CD026W| E58CD026AW
OTC Daihen| AX-V4| E58CD003| E58CD003A| E58CD003W| E58CD003AW
OTC Daihen| AX-V4L| E58CD022| E58CD022A| E58CD022W| E58CD022AW
OTC Daihen| FD B4| E58CD036| E58CD036A| E58CD036W| E58CD036AW
OTC Daihen| FD B4L| E58CD037| E58CD037A| E58CD037W| E58CD037AW
Panasonic®| TB1800WGIII| E58CP034| E58CP034A| E58CP034W| E58CP034AW

LSR+ (Low-Stress Robotic) Unicables – Clutch (Euro; equipped with TOUGH GUN I.C.E.® Technology)

Robot Brand

| ****

Robot Model

| LSR+ Unicable Part Number (for TOUGH GUN I.C.E. Assembly)
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
Nachi®| NB04| IE58CD036| IE58CD036A| IE58CD036W| IE58CD036AW
Nachi| NB04L| IE58CD037| IE58CD037A| IE58CD037W| IE58CD037AW
OTC Daihen®| FD B4| IE58CD036| IE58CD036A| IE58CD036W| IE58CD036AW
OTC Daihen| FD B4L| IE58CD037| IE58CD037A| IE58CD037W| IE58CD037AW

LSR+ (Low-Stress Robotic) Unicables – Solid Mount

Robot Brand

| ****

Robot Model

| LSR+ Unicable Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
ABB®| IRB1600ID, IRB1520ID| 58SA024| 58SA024A| 58SA024W| 58SA024AW
ABB| IRB2600ID-15/1.85| 58SA028| 58SA028A| 58SA028W| 58SA028AW
ABB| IRB2600ID-8/2.00| 58SA029| 58SA029A| 58SA029W| 58SA029AW
ABB| IRB1660ID| 58SA030| 58SA030A| 58SA030W| 58SA030AW
FANUC®| 100iC, 100iC-12| 58SF005| 58SF005A| 58SF005W| 58SF005AW
FANUC| 100iC-6L, 100iC-7L| 58SF007| 58SF007A| 58SF007W| 58SF007AW
FANUC| 100iC-8L| 58SF010| 58SF010A| 58SF010W| 58SF010AW
FANUC^^| 100iD, 100iD-12| 58SF011^^| –| 58SF011W^^| –
FANUC^| 100iD, 100iD-12| L58SF011^| –| L58SF011W^| –
FANUC^^| 100iD-8L| MC58SF012^^| –| MC58SF012W^^| –
FANUC^| 100iD-8L| L58SF012^| –| L58SF012W^| –
FANUC^^| 100iD-10L| MC58SF014^^| –| MC58SF014W^^| –
FANUC^| 100iD-10L| L58SF014^| –| L58SF014W^| –
FANUC| 120iC| 58SF006| 58SF006A| 58SF006W| 58SF006AW
FANUC| 120iC-10L, 120iC-12L| 58SF008| 58SF008A| 58SF008W| 58SF008AW
FANUC^^| 120iD| MC58SF015^^| –| MC58SF015W^^| –
FANUC^| 120iD| L58SF015^| –| L58SF015W^| –
FANUC^^^| 120iD| F58SF015^^^| –| F58SF015W^^^| –
FANUC^^| 120iD-12L| MC58SF016^^| –| MC58SF016W^^| –
FANUC^| 120iD-12L| L58SF016^| –| L58SF016W^| –
FANUC| M10iA-6L, M10iA-7L| 58SF007| 58SF007A| 58SF007W| 58SF007AW
Kawasaki®| BA0006N| 58SKW042| 58SKW042A| 58SKW042W| 58SKW042AW
Kawasaki| BA0006L| M58SKW045| M58SKW045A| M58SKW045W| M58SKW045AW
Kawasaki^^| BA013N| 58SKW046^^| 58SKW046A^^| 58SKW046W^^| 58SKW046AW^^
Kawasaki^^| BA013L| 58SKW047^^| 58SKW047A^^| 58SKW047W^^| 58SKW047AW^^
KUKA®| KR 5 arc HW| 58SK023| 58SK023A| 58SK023W| 58SK023AW
KUKA| KR 16 L8 HW| 58SK027| 58SK027A| 58SK027W| 58SK027AW
KUKA| KR 16 arc HW| 58SK030| 58SK030A| 58SK030W| 58SK030AW
KUKA| KR6 R1820HW| M58SK031| M58SK031W| M58SK031W| M58SK031AW
KUKA^| KR8 R1820HW| L58SK031^| L58SK031W^| L58SK031W^| L58SK031AW^
KUKA^^| KR8 R1420HW, KR8 R1620HW| MC58SK032^^| MC58SK032A^^| MC58SK032W^^| MC58SK032AW^^
KUKA^| KR8 R1420HW, KR8 R1620HW| L58SK032^| L58SK032A^| L58SK032W^| L58SK032AW^
KUKA^^| KR8 R2100HW| MC58SK033^^| MC58SK033A^^| MC58SK033W^^| MC58SK033AW^^
KUKA^| KR8 R2100HW| L58SK033^| L58SK033A^| L58SK033W^| L58SK033AW^
Motoman®| EA1400 XRC| 58SM016| 58SM016A| 58SM016W| 58SM016AW
Motoman| EA1900 XRC| 58SM017| 58SM017A| 58SM017W| 58SM017AW
Motoman| EA1400N, SSA2000, MA1400, VA1400| 58SM001| 58SM001A| 58SM001W| 58SM001AW
Motoman| MA1440, AR1440, MH12| 58SM035| 58SM035A| 58SM035W| 58SM035AW
Motoman| EA1900N| 58SM002| 58SM002A| 58SM002W| 58SM002AW
Motoman| MA2010, AR2010| 58SM038| 58SM038A| 58SM038W| 58SM038AW
Motoman| MA3100, MA3120, AR3120| 58SM031| 58SM031A| 58SM031W| 58SM031AW
Motoman| MH24, AR1730| 58SM039| 58SM039A| 58SM039W| 58SM039AW
Panasonic®| TB1800WGIII| 58SP034| 58SP034A| 58SP034W| 58SP034AW
Panasonic| TM-1100, TM-1400| P58SP037| P58SP037A| P58SP037W| P58SP037AW
Panasonic| TM-1800| P58SP039| P58SP039A| P58SP039W| P58SP039AW
Panasonic| TM-2000| P58SP041| P58SP041A| P58SP041W| P58SP041AW*
Panasonic| TM-1100, TM-1400| M58SP037| M58SP037A| M58SP037W| M58SP037AW
Panasonic| TM-1800| M58SP039| M58SP039A| M58SP039W| M58SP039AW
Panasonic| TM-2000| M58SP041| M58SP041A| M58SP041W| M58SP041AW**
Panasonic^^| TM-1100, TM-1400| MC58SP037^^| MC58SP037A^^| MC58SP037W^^| MC58SP037AW^^
Panasonic^^| TM-1800| MC58SP039^^| MC58SP039A^^| MC58SP039W^^| MC58SP039AW^^
Panasonic^^| TM-1600| MC58SP040^^| MC58SP040A^^| MC58SP040W^^| MC58SP040AW^^
Panasonic^^| TM-2000| MC58SP041^^| MC58SP041A^^| MC58SP041W^^| MC58SP041AW^^

• Only available for use with a Panasonic® power pin.
• Only available for use with a Lincoln® power pin.
• Only available for use with a Miller® power pin w/Miller Auto-Axcess® feeder.
• Only available for use with a Miller power pin w/Miller Auto-Continuum® feeder.
• Only available for use with Fronius® VR-1500 PAP feeder.

LSR+ (Low-Stress Robotic) Unicables – Solid Mount (equipped with TOUGH GUN I.C.E.® Technology)

Robot Brand

| ****

Robot Model

| LSR+ Unicable Part Number (for TOUGH GUN I.C.E. Assembly)
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
ABB®| IRB1600ID, IRB1520ID| I58SA024| I58SA024A| I58SA024W| I58SA024AW
ABB| IRB2600ID-15/1.85| I58SA028| I58SA028A| I58SA028W| I58SA028AW
ABB| IRB2600ID-8/2.00| I58SA029| I58SA029A| I58SA029W| I58SA029AW
ABB| IRB1660ID| I58SA030| I58SA030A| I58SA030W| I58SA030AW
FANUC®| 100iC, 100iC-12| 58SF205| –| 58SF205W| –
FANUC| 100iC-6L, 100iC-7L| 58SF207| –| 58SF207W| –
FANUC| 100iC-8L| 58SF210| –| 58SF210W| –
FANUC^^| 100iD, 100iD-12| 58SF211^^| –| 58SF211W^^| –
FANUC^| 100iD, 100iD-12| L58SF211^| –| L58SF211W^| –
FANUC^^| 100iD-10L| MC58SF214^^| –| MC58SF214W^^| –
FANUC^| 100iD-10L| L58SF214^| –| L58SF214W^| –
FANUC| 120iC| 58SF206| –| 58SF206W| –
FANUC| 120iC-10L, 120iC-12L| 58SF208| –| 58SF208W| –
FANUC^^| 120iD| MC58SF215^^| –| MC58SF215W^^| –
FANUC^| 120iD| L58SF215^| –| L58SF215W^| –
FANUC^^| 120ID-12L| MC58SF216^^| –| MC58SF216W^^| –
FANUC^| 120ID-12L| L58SF216^| –| L58SF216W^| –
FANUC| M10iA-6L, M10iA-7L| 58SF207| –| 58SF207W| –
Panasonic| TM-1100, TM-1400| IP58SP037| IP58SP037A| IP58SP037W| IP58SP037AW
Panasonic| TM-1800| IP58SP039| IP58SP039A| IP58SP039W| IP58SP039AW
Panasonic| TM-2000| IP58SP041| IP58SP041A| IP58SP041W| IP58SP041AW*
Panasonic| TM-1100, TM-1400| IM58SP037| IM58SP037A| IM58SP037W| IM58SP037AW
Panasonic| TM-1800| IM58SP039| IM58SP039A| IM58SP039W| IM58SP039AW
Panasonic| TM-1600| IM58SP040| IM58SP040A| IM58SP040W| IM58SP040AW
Panasonic| TM-2000| IM58SP041| IM58SP041A| IM58SP041W| IM58SP041AW
Panasonic^^| TM-1100, TM-1400| IMC58SP037^^| IMC58SP037A^^| IMC58SP037W^^| IMC58SP037AW^^
Panasonic^^| TM-1800| IMC58SP039^^| IMC58SP039A^^| IMC58SP039W^^| IMC58SP039AW^^
Panasonic^^| TM-1600| IMC58SP040^^| IMC58SP040A^^| IMC58SP040W^^| IMC58SP040AW^^
Panasonic^^| TM-2000| IMC58SP041^^| IMC58SP041A^^| IMC58SP041W^^| IMC58SP041AW^^

• Only available for use with a Panasonic® power pin
• Only available for use with a Lincoln® power pin
• Only available for use with a Miller® power pin w/Miller Auto-Axcess® feeder
• Only available for use with a Miller power pin w/Miller Auto-Continuum® feeder

LSR+ (Low-Stress Robotic) Unicables – Solid Mount (Euro)

Robot Brand

| ****

Robot Model

| Euro LSR+ Unicable Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
ABB®| IRB1600ID, IRB1520ID| E58SA024| E58SA024A| E58SA024W| E58SA024AW
ABB| IRB2600ID-15/1.85| E58SA028| E58SA028A| E58SA028W| E58SA028AW
ABB| IRB2600ID-8/2.00| E58SA029| E58SA029A| E58SA029W| E58SA029AW
ABB| IRB1660ID| E58SA030| E58SA030A| E58SA030W| E58SA030AW
FANUC®| 100iC, 100iC-12| E58SF005| E58SF005A| E58SF005W| E58SF005AW
FANUC| 100iC-6L, 100iC-7L| E58SF007| E58SF007A| E58SF007W| E58SF007AW
FANUC| 100iC-8L| E58SF010| E58SF010A| E58SF010W| E58SF010AW
FANUC| 120iC| E58SF006| E58SF006A| E58SF006W| E58SF006AW
FANUC| 120iC-10L, 120iC-12L| E58SF008| E58SF008A| E58SF008W| E58SF008AW
FANUC| M10iA-6L, M10iA-7L| E58SF007| E58SF007A| E58SF007W| E58SF007AW
Kawasaki®| BA006N| E58SKW042| E58SKW042A| E58SKW042W| E58SKW042AW
KUKA®| KR 5 arc HW| E58SK023| E58SK023A| E58SK023W| E58SK023AW
KUKA| KR 16 L8 HW| E58SK027| E58SK027A| E58SK027W| E58SK027AW
KUKA| KR 16 arc HW| E58SK030| E58SK030A| E58SK030W| E58SK030AW
Motoman®| EA1400 XRC| E58SM016| E58SM016A| E58SM016W| E58SM016AW
Motoman| EA1900 XRC| E58SM017| E58SM017A| E58SM017W| E58SM017AW
Motoman| EA1400N, SSA2000, MA1400, VA1400| E58SM001| E58SM001A| E58SM001W| E58SM001AW
Motoman| MA1440, AR1440, MH12| E58SM035| E58SM035A| E58SM035W| E58SM035AW
Motoman| EA1900N| E58SM002| E58SM002A| E58SM002W| E58SM002AW
Motoman| MA2010, AR2010| E58SM038| E58SM038A| E58SM038W| E58SM038AW
Motoman| MA3100, MA3120, AR3120| E58SM031| E58SM031A| E58SM031W| E58SM031AW
Motoman| MH24, AR1730| E58SM039| E58SM039A| E58SM039W| E58SM039AW
Panasonic®| TB1800WGIII| E58SP034| E58SP034A| E58SP034W| E58SP034AW

• Only available for use with a Panasonic® power pin.
• Only available for use with a Lincoln® power pin.
• Only available for use with a Miller® power pin w/Miller Auto-Axcess® feeder.
• Only available for use with a Miller power pin w/Miller Auto-Continuum® feeder.

Low-Stress Robotic+ (LSR+) Unicables – Solid Mount (Euro; equipped with TOUGH GUN I.C.E.® Technology)

Robot Brand

| ****

Robot Model

| LSR+ Unicable Part Number (for TOUGH GUN I.C.E. Assembly)
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
ABB®| IRB1600ID, IRB1520ID| IE58SA024| IE58SA024A| IE58SA024W| IE58SA024AW
ABB| IRB2600ID-15/1.85| IE58SA028| IE58SA028A| IE58SA028W| IE58SA028AW
ABB| IRB2600ID-8/2.00| IE58SA029| IE58SA029A| IE58SA029W| IE58SA029AW
ABB| IRB1660ID| IE58SA030| IE58SA030A| IE58SA030W| IE58SA030AW
FANUC®| 100iC, 100iC-12| E58SF205| –| E58SF205W| –
FANUC| 100iC-6L, 100iC-7L, M10iA-6L, M10iA-7L| E58SF207| –| E58SF207W| –
FANUC| 100iC-8L| E58SF210| –| E58SF210W| –
FANUC| 120iC| E58SF206| –| E58SF206W| –
FANUC| 120iC-10L, 120iC-12L| E58SF208| –| E58SF208W| –

Mounting Options

Clutch

Robot Brand

| ****

Robot Model

| Clutch Mount Connector Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
COMAU®| Smart5 Arc6| C58G1| C58G1| C58G1W| C58G1W
Kawasaki®| BA006N, BA006L| KW58G1| KW58G1| KW58G1W| KW58G1W
KUKA®| KR 5 arc HW, KR 16 L8 HW| K5800| K5800| K5800W| K5800W
KUKA| KR 16 arc HW| K258G1| K258G1| K258G1W| K258G1W
KUKA| KR6 R1820HW, KR6 2100HW, KR8 R1420HW,

KR8 R 1620 HW

| K358G1| K358G1| K358G1W| K358G1W

Motoman®

| EA1400 XRC, EA1900 XRC, EA1400N, EA1900N, SSA2000, MA1400, VA1400, MA3100, MA3120, AR3120| ****

5800

| ****

5800

| ****

5800W

| ****

5800W

Motoman| MA1440, AR1440, MH12, MH24, AR1730,

MA2010, AR2010

| M58G1| M58G1| M58G1W| M58G1W
Nachi®| NB04, NB04L| D25800| D25800| D25800W| D25800W
Nachi| NB6, NB6L| D35800| D35800| D35800W| D35800W
OTC Daihen®| AII-B4, AII-B4L| D25800| D25800| D25800W| D25800W
OTC Daihen| AX-V4, AX-V4L| D5800| D5800| D5800W| D5800W
OTC Daihen| FD B4, FD B4L| D25800| D25800| D25800W| D25800W
OTC Daihen| FD B6, FD B6L| D35800| D35800| D35800W| D35800W
Panasonic®| TB1800WGIII| P5800| P5800| P5800W| P5800W
Panasonic| TM-1100, TM-1400, TM-1800, TM-1600, TM-2000| P258G1| P258G1| P258G1W| P258G1W

Clutch – TOUGH GUN I.C.E.® Technology

Robot Brand

| ****

Robot Model

| Clutch Mount Connector Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
Nachi®| NB04, NB04L| ID25800| ID25800| ID25800W| ID25800W
OTC Daihen®| FD B4, FD B4L| ID25800| ID25800| ID25800W| ID25800W
Panasonic| TM-1100, TM-1400, TM-1800, TM-1600, TM-2000| IP258G1| IP258G1| IP258G1W| IP258G1W

Solid Mount

Robot Brand

| ****

Robot Model

| Solid Mount Connector Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
ABB®| IRB1600ID, IRB1520ID| A58G1S| A58G1S| A58G1SW| A58G1SW
ABB| IRB2600ID-15/1.85, IRB2600ID-8/2.00, IRB1660ID| A258G1S| A258G1S| A258G1SW| A258G1SW
FANUC®| 100iC, 100iC-12, 100iC-6L, 100iC-7L, 100iC-8L,

120iC, 120iC-10L, 120iC-12L, M10iA-6L, M10iA-7L

| 560-500| 560-502| W560-500-XXX| W560-500-XXXA
FANUC| 100iD, 100iD-12, 100iD-8L, 100iD-10L, 120iD,

120iD-12L

| 560-600| –| *560-600W-XXX| –
Kawasaki®| BA006N| KW58G1S| KW58G1S| KW58G1SW| KW58G1SW
Kawasaki| BA013N| KW258G1S| KW258G1S| –| –
KUKA®| KR 5 arc HW, KR 16 L8 HW| K58G1S| K58G1S| K58G1SW| K58G1SW
KUKA| KR 16 arc HW| K5800S| K5800S| K5800SW| K5800SW
KUKA| KR6 R1820HW, KR6 R2100HW, KR8 R1420HW,

KR8 R1620HW

| K358G1S| K358G1S| K358G1SW| K358G1SW

Motoman®

| EA1400 XRC, EA1900 XRC, EA1400N, EA1900N, SSA2000, MA1400, VA1400, MA3100, MA3120,

AR3120

| ****

5800S

| ****

5800S

| ****

5800SW

| ****

5800SW

Motoman| MA1440, AR1440, MH12, MH24, AR1730,

MA2010, AR2010

| M58G1S| M58G1S| M58G1SW| M58G1SW
Panasonic®| TB1800WGIII| P58G1S| P58G1S| P58G1SW| P58G1SW
Panasonic| TM-1100, TM-1400, TM-1800, TM-1600, TM-2000| P258G1S| P258G1S| P258G1SW| P258G1SW

*XXX in the part numbers above represent wire size. For wire sizes between 0.035” and 0.045”, XXX = “045”; For wire sizes between 0.052” and 1/16”, XXX = “116”.

Solid Mount – TOUGH GUN I.C.E.® Technology

Robot Brand

| ****

Robot Model

| Solid Mount Connector Part Number
---|---|---
No Options| Air Blast| Wire Brake| Air Blast + Wire Brake
ABB®| IRB1600ID, IRB1520ID| IA58G1S| IA58G1S| IA58G1SW| IA58G1SW
ABB| IRB2600ID-15/1.85, IRB2600ID-8/2.00, IRB1660ID| IA258G1S| IA258G1S| IA258G1SW| IA258G1SW
FANUC®| 100iC, 100iC-12, 100iC-6L, 100iC-7L, 100iC-8L,

120iC, 120iC-10L, 120iC-12L, M10iA-6L, M10iA-7L

| 560-501| –| W560-501-XXX| –
FANUC| 100iD, 100iD-12, 100iD-10L, 120iD, 120ID-12L| 560-600I| –| 560-600IW- XXX| –
Panasonic| TM-1100, TM-1400, TM-1800, TM-1600, TM-2000| IP258G1S| IP258G1S| IP258G1SW| IP258G1SW

*XXX in the part numbers above represent wire size. For wire sizes between 0.035” and 0.045”, XXX = “045”; For wire sizes between 0.052” and 1/16”, XXX = “116”.

Insulating Discs

• AS-114-1 Motoman® insulating disc.
• AS-114-6 KUKA® insulating disc.
• AS-115-1 Panasonic® TB1800WGIII insulating disc.
• AS-116-1 OTC Daihen® insulating disc.
• 560-500-11 FANUC® iC Series (except when equipped with TOUGH GUN I.C.E.) FANUC iC insulating disc.
• 560-501-11 FANUC® iD Series and TOUGH GUN I.C.E FANUC iC series insulating disc.

Spacers (Clutch Systems)

• AS-114-9 KUKA KR 16 arc HW Spacer + M5x0.8-12Lg. SHCS
• AS-114-13 Motoman MA1440 / AR1440 / MH12 / MH24 / MA2010 /
• AR2010 Spacer + M4x0.7-60Lg. SHCS
• AS-114-10 COMAU® Smart5 Arc4 Spacer + M6x1-12Lg. SHCS
• AS-114-12 + Panasonic TM-1100 / 1400 / 1600 / 1800 / 2000 Spacer
• AS-114-11 + M5x0.8-70Lg. SHCS (must be used with AS-114-11 Transition Disc, sold separately)
• AS-114-18 KUKA KR6 R1820HW / KR8 R1420HW / KR8 R1620HW, KR8 R2100HW Spacer + M4x0.7-80Lg. SHCS
• AS-116-2 OTC AII-B4 / AII-B4L / FD B4 / FD B4L Transition Disc + M5x0.8-10Lg. SHCS
• AS-116-4 + AS-116-3 OTC FD B6 / FD B6L Spacer + M4x0.7-60Lg. SHCS (must be used with AS-116-3 Transition Disc, sold separately)

Spacers (Solid Mount Systems)

• AS-114-7 ABB 1600ID / 1520ID Spacer + M6x1-16Lg. SHCS
• AS-114-9 KUKA KR 16 arc HW Spacer + M5x0.8-12Lg. SHCS
• AS-114-8 ABB 2600ID Spacer + M8x1.25-12Lg. SHCS
• AS-114-15 + AS-114-16^ Kawasaki BA006N Spacer + M5x0.8-16Lg.SHCS (^must be used with AS-114-16 Transition Disc, sold separately)
• AS-114-12 + AS-114-11 Panasonic TM-1100 / 1400 / 1600 / 1800 / 2000 Spacer + M5x0.8-70Lg. SHCS (must be used with AS-114-11 Transition Disc, sold separately)
• AS-114-18 KUKA KR6 R1820HW / KR8 R1420HW / KR8 R1620HW, KR8 R2100HW Spacer + M4x0.7-80Lg. SHCS
• 560-600-11 FANUC 100iD Spacer + M4x0.7-12Lg. SHCS
• AS-116-5 Kawasaki B013N Spacer + M6x1-16Lg.SHCS (^must be used with AS-114-15 + AS-114-16 Transition Disc, Spacer, sold separately)

Power Pins

Power Pins

• 425-10E Euro 214-39 OTC Daihen®
• 214-41 Fronius® 214-30 Panasonic®
• 214-40 Lincoln® 214 Tweco® #4
• 214-1 Miller® 214-24 Tweco #5

**AutoLength™ Pins***

• 214-X41 Fronius 214-X30 Panasonic
• 214-X40 Lincoln 214-X0 Tweco #4
• 214-X1 Miller 214-X12 Tweco #5
• 214-X39 OTC Daihen

For use with QUICK LOAD Liners only.
NOTE : For wire sizes between 0.035” and 0.045”, X=”8”; For wire sizes between 0.052” and 3/32”, X=”9”. AutoLength™ Pin not compatible with wire size selections for aluminum wire.

Peripherals & Accessories

TOUGH GUN® TT4 Reamer
Power Through Weld Spatter for Increased Uptime and Weld Quality Automating spatter removal helps to extend the life of your robotic MIG guns and consumables, benefiting your bottom line, production uptime and throughput. Operates reliably in the harshest welding environments.
Visit Tregaskiss.com/robotic-nozzle-cleaning  stations for ordering information.

TOUGH GARD Anti-Spatter Liquid ****

This ready-to-use water soluble, non-toxic product creates a sacrificial surface that reduces spatter adhesion. This prolongs the life of your consumables and minimizes downtime due to nozzle cleaning which can help reduce your operating and maintenance costs.

TOUGH GARD Anti-Spatter Liquid

• TG-101-05 5.28 U.S. Gallon / 20 L
• TG-101-55 55 U.S. Gallon / 208 L
• TG-101-01 1 U.S. Gallon / 3.78 L
• TG-101-32SP 32 fl. oz. / 946 mL (spray bottle)
• TG-101-14S 16.9 fl. oz. / 500 mL

TOUGH GARD® Multi-Feed System

Eliminate the need to frequently refill sprayer reservoirs with the TOUGH GARD Multi-Feed System from Tregaskiss. Feed up to 10 TOUGH GUN Reamer units from a single 5-gallon or 55-gallon drum of TOUGH GARD Anti-Spatter Liquid.

• TG-103-05-2 for 5-Gallon pail (up to 2 nozzle cleaning stations)
• TG-103-05-10 for 5-Gallon pail (up to 10 nozzle cleaning stations)
• TG-103-55-10 for 55-Gallon drum (up to 10 nozzle cleaning stations)

TOUGH GARD Multi-Feed System Hose (sold separately)

• TG-103-100 100’ Multi-Feed Hose
• TG-103-200 200’ Multi-Feed Hose

Neck Checking Fixture

The TOUGH GUN Neck Checking Fixture allows you to verify and re-master your tool center point (TCP). In the event of a collision, this fixture can be used to realign the neck.
G-405CA Neck Checking Fixture for air-cooled and TOUGH GUN I.C.E.® Neck assemblies.

TOUGH GUN® TA3 Robotic MIG Guns

• Air blast option not available for FANUC® configurations equipped with TOUGH GUN I.C.E.® Technology.
• Available for FANUC® and ABB®; Not compatible with TOUGH ACCESS™ Consumables; X.XXX represents nozzle O.D.
• XX=wire size.
• Available for wire sizes between 0.030″ and 0.045″.
• Available for wire sizes between 0.035″ and 0.052″.
• Wire Size option determines contact tip, liner type and liner size.
• If you are configuring a gun that will plug into a Fronius® feeder, please contact Tregaskiss Tech Support with feeder model number.
• If configuring gun without consumables, “0” must be for Gas Diffuser and Contact Tip, Nozzle and Wire Size Option.
• Only available for use with a Miller power pin with Miller Auto- Continuum feeder.

Brand and product names shown above are trademarks of their respective owners. Tregaskiss®, TOUGH GUN®, TOUGH LOCK®, QUICK LOAD® and AccuLock™ are trademarks of Tregaskiss, a division of ITW Canada Inc. Subject to Change – The information presented in this spec sheet is accurate to the best of our knowledge at the time of printing. Please visit Tregaskiss.com for the most up-to-date information.

References

• Semi-Automatic MIG Guns, Robotic MIG Guns, Fixed Automatic Torches, Nozzle Cleaning Stations, and Welding Consumables - Bernard and Tregaskiss

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>