ATOLL ELECTRONIQUE AM100 S Signature Power Amplifier Rapallo Owner’s Manual
- September 20, 2024
- ATOLL ELECTRONIQUE
Table of Contents
AM100 S Signature Power Amplifier Rapallo
“`html
Specifications
- Power: [specify power here]
- Impulse power: [specify impulse power here]
- Supply: [specify supply details here]
- Total of capacitors: [specify total capacitors]
- Number of inputs: [specify number of inputs]
- Switch OFF consumption: [specify consumption when off]
- ON consumption: [specify consumption when on]
- Input impedance: [specify input impedance]
- Sensibility: [specify sensibility]
- Signal/Noise ratio: [specify ratio]
- Distortion at 1kHz: [specify distortion level]
- Bandwidth: [specify bandwidth]
- Rising time: [specify rising time]
- Dimensions: [specify dimensions]
- Weight: [specify weight]
Product Usage Instructions
Connecting the Amplifier
-
Connect the amplifier input to your audio source.
-
If bi-amping, connect the amplifier output to another power
amplifier. -
Connect the right and left channel outputs accordingly.
-
For Trigger function, connect a 12V input to synchronize with
other devices. -
Plug in the power cord and use the ON/SLEEP switch for power
control.
Details of Functions
The power indicator LED will show the operational status of the
amplifier.
Cleaning Instructions
Before cleaning, ensure the appliance is switched off. Use a
soft, dry rag for cleaning. Avoid harsh chemicals or cleaning
inside the appliance.
Technical Data
[Include technical data details here]
FAQ
Q: What is the warranty period for the amplifier?
A: The warranty period is two years from the date of purchase.
Keep your proof of purchase for authenticity.
Q: How to switch the Power Amplifier from Stereo to Mono?
A: To switch to Mono mode, push the switch inside the appliance
after ensuring it is unplugged and no other devices are
connected.
“`
OWNER’S MANUAL ~ AMPLIFIER
CONNECTING
12 3 4 5
6
-
Amplifier input. 2) Amplifier output (to another power
amplifier for bi-amp). 3) Right channel output. -
Trigger 12V input(1). 5) Left channel output. 6) General power plug and ON/SLEEP
switch (with internal fuse).
(1) Trigger input: This input allows the control ON/SLEEP of your amplifier simultaneously to any device with a 12V Trigger outlet. In order that the system is operating, the ON/SLEEP button of your Amplifier must remain in position SLEEP (0). If the switch is in the ON position (I), the amplifier will work but not the Trigger function.
Jack Ø 3,5 mm
Trigger cable must be a Male to Male stereo jack plug Ø 3,5 mm (1/8″).
DETAILS OF FUNCTIONS
- Power indicator led.
7 Page 4 ATOLL ELECTRONIQUE
CONNECTING (Configuration: 1 Preamplifier and 2 mono amplifiers).
AM100 Sig
PRE-OUT
DO NOT
L
OPEN
NE PAS
R
OUVRIR
SERIAL NUMBER NUMERO DE SERIE MADE IN FRANCE FABRIQUE EN FRANCE
PREAMP
AMPLI IN OUT L
R
RIGHT +
LEFT +
DO NOT OPEN NE PAS OUVRIR
SERIAL NUMBER NUMERO DE SERIE MADE IN FRANCE FABRIQUE EN FRANCE
POWER
AMP 1
AMPLI IN OUT L
R
RIGHT +
LEFT +
DO NOT OPEN NE PAS OUVRIR
SERIAL NUMBER NUMERO DE SERIE MADE IN FRANCE FABRIQUE EN FRANCE
POWER
AMP 2
+
+
MONO BRIDGE MODE
Warning: for the AM100 Signature, bridged mono mode is not recommended on speakers with an impedance of less than 6 .
To transform your Power Amplifier from Stereo to Mono, you have to push the switch a placed inside the appliance as shown below:
Warning: be sure
that your amplifier is unplugged and that no other appliance is plug in during
this operation.
a
LEFT
Internal view.
Page 5 ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ AMPLIFIER
E.C. MARKING
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE and national transpositions.
WARRANTY CONDITIONS
ATOLL ELECTONIQUE warranty is two years period from the date of purchase; date
and stamp of the seller being authentic. We recommend you to keep your proof
of purchase (invoice). The warranty, as well as the terms of service, should
be specified at the time of purchase by your dealer who will advise you, in
case of faulty behaviour or failure. This warranty covers labour and
replacement of parts acknowledged to be faulty, and not the normal wear and
tear caused.
Devices with traces of disassembly, drop, immersion, abnormal voltage or any
cause of degradation and damage resulting from a contrary use of the
indications included in this owner manual, automatically lose the benefit of
the guarantee.
CLEANING
Before any cleaning, switch off your appliance. Use a soft and dry rag to
clean up the device. Never use acetone, white-spirit, ammoniac, or any kind of
product containing an abrasive agent. Never try to clean up inside the
appliance.
TECHNICAL DATA
Power:
Impulse power: Supply: Total of capacitors: Number of inputs: Switch OFF
consumption: ON consumption: Input impedance: Sensibility: Signal/Noise ratio:
Distortion at 1kHz: Bandwidth: Rising time: Dimensions: Weight:
100 W /ch. /8 140 W /ch. /4 180 W /ch. 2×340 VA 32 247 µF 2 0 W 11 W – 500 W 47 k 1,77 V 100 dBA 0,05% / (10 W) 5 Hz – 100 kHz 1,3 µs 440×291×95 mm 11 Kg
Page 6 ATOLL ELECTRONIQUE
AM100 Sig
CAUTIONS · Do not make any connections when your device is powered on. · Put
your amplifier in a dry and well ventilated place, far from source of
heat. · Do not put something on your amplifier. · Avoid any short-cut. ·
Respect polarity + & and switch left & right: · Do not plug in two speakers in
parallel on the same output.
ADVICES
· To optimize the performance of your device, you should switch it on at least
half an hour before any listening, the time for the power stage to reach its
ideal working temperature.
· Your device will give you optimal listening quality after this time-lapse. ·
Between two uses, it is, therefore, preferable to let the device on so that
it remains at its optimum temperature. · At night or when you leave your home,
it is best to use the main switch
to turn off the device. · To optimize the sound quality of your system, we
recommend that you
choose good-quality connection cords. Do not hesitate to ask your specialist
dealer for advice. · Your Amplifier is equipped with a temporised switch on. A
relay protects loudspeakers on output power stage from over-voltage.
Page 3 ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ AMPLIFIER
You have just bought an amplifier with exceptional audiophile performance. We
really thank you for your confidence in our products. To get the best part
of your amplifier, please read carefully this manual.
YOU WILL FIND ENCLOSED
A power amplifier AM100 Signature. One power cord. This manual with the
warranty certificate.
Latest update: 10th June 2024, 15:00
AM100 Sig
TROUBLESHOOTING
Problem encountered
Possible solutions
The power-on indicator does not light up.
The main switch (6) is in the wrong position. The power cord is not properly connected. Check the fuse in the general power plug (6).
One of the speakers remains silent.
Check the quality of the connections between the amplifier and the speaker in question. Check the quality of the connections between the preamplifier and the amplifier.
ATOLL ELECTRONIQUE® is a French Company that designs, manufactures,
and commercializes all its products.
Page 2 ATOLL ELECTRONIQUE
Page 7 ATOLL ELECTRONIQUE
OWNER’S MANUAL ~ AMPLIFIER
WARRANTY FORM ~ AM100 Sig
To present to your dealer with the invoice when returning back the appliance:
ATOLL ELECTRONIQUE® Bd des Merisiers 50370 BRECEY FRANCE
Date of purchase: Place of purchase: Buyer signature:
Dealer Stamp
Page 8 ATOLL ELECTRONIQUE
OWNER’S MANUAL
AM100 SIGNATURE
POWER AMPLIFIER
www.atoll-electronique.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>