LFP-HC12V165 Shandong Haicen Power Instruction Manual

September 19, 2024
Haicen

LFP-HC12V165 Shandong Haicen Power

Product Information

Specifications:

  • Allowed MAX charge current: 150A
  • End of discharge voltage: 10V
  • Operation temperature:
    • Charging: -20-45°C (charging current less than 5A) 0-45°C (charging current over 5A)
    • Discharging: -20-60°C
    • Storage environment: 1 month recommended environment -20-35°C, 45-75%RH 15-30°C, 45-75%RH

Product Usage Instructions

  1. General Information:
    This specification defines the performance of the rechargeable LiFePO4 battery pack HC12V165 manufactured by HAICEN.

  2. Battery Performance:
    The battery cycle life is specified at different depths of discharge (DOD) and temperatures. Ensure proper charging and discharging cycles are maintained to maximize battery life.

  3. BMS Function:
    The battery pack is equipped with a Battery Management System (BMS) that provides various protections such as overcharge, over-discharge, over-current, short circuit, and temperature protection. The BMS can be monitored through Bluetooth for real-time status updates.

  4. Bluetooth Function Interface:
    The battery pack supports Bluetooth connectivity for monitoring and controlling the heating function, display settings, and CAN communication interface.

Frequently Asked Questions

Q: How do I ensure the longevity of the battery?

A: Follow the recommended charging and discharging cycles as per the specifications provided. Avoid extreme temperatures and maintain proper storage conditions.

Q: Can I connect the battery pack to external monitoring devices?

A: Yes, the battery pack supports CAN communication for interfacing with compatible monitoring devices like the Victron Cerbo GX box.

Q: What should I do if the BMS triggers a protection mechanism?

A: If any protection mechanism is triggered, stop using the battery immediately and consult the user manual for troubleshooting steps or contact the manufacturer for assistance.

Preface

  • Thank you so much for buying lithium batteries from HAICEN
  • Be sure to finish reading before installation/use; So you can use the lithium pack properly. After reading it, please keep it safe!
  • If there is any ambiguity about this specification, or if you need to discuss technical issues, please contact our company!

General Information

This specification defines the performance of the rechargeable LiFePO4 battery pack HC12V165 manufactured by HAICEN. describes the type, performance, technical characteristics, installation, warning and caution of the battery pack.

Battery Specification

Battery Specification(@ 25±5℃)

NO Items Characteristics
2.1 Normal capacity 165Ah
2.2 Nominal energy 2.1KWh
2.3 Nominal voltage 12.8V (4Serial-cell)
2.4 Internal resistance ≤25mΩ @1kHz AC
2.5 Normal charge voltage 14.6±0.1V
2.6 Float charge voltage(for Standby use) 13.8±0.1V
2.7 Allowed MAX charge current 82.5A
2.8 Recommended charge current ≤33A
2.9 Allowed MAX discharge current 150A
2.10 End of discharge voltage 10V
2.11 Over current protection 700±50A

2.12

|

Dimensions

| Length     355±2 mm
Height     175±2 mm
width       188±2 mm
2.13| Weight| 15±0.5kg
2.14| Self-discharge rate| ≤3%/Month;     ≤15%/ year

2.15

|

Operation temperature

|

Charging

| -20~45℃(charging current less than 5A)

0~45℃(charging current over 5A)

Discharging| -20~60℃

2.16

| Storage environment| ≤1month| -20~+35℃、45~75%RH
Recommend environment| 15~30℃、45~75%RH

Battery Performance

  • Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~85%.
  • Normal charge: Charge battery under CC(0.2C)/CV(14.4V) mode until overcharge protection or the charge current reduces to 0.02C, and then rest for 0.5h.

NO

| Items| Criterion|

Condition

---|---|---|---

3.1

|

Cycle life @DOD100%

|

≥2000cycles

| After Normal charge, discharge @0.2C current to the end Of discharge voltage. Repeat the above process until discharge capacity reduces to 80% of the initial value.

Cycle life @DOD70%

|

≥7500cycles

| Charge the battery to 3.45V@0.2C current and hold for 0.5h, then discharge @0.2C current to 3.1V. Repeat the above process until discharge capacity is reduced to 80% of the initial value.

3.2

| Discharge temperature characteristic@

0.33C

| -20℃| ≥70%|

Capacity @specified temperature Capacity @ 25℃

-0℃| ≥80%
25℃| ≥100%

55℃

|

≥95%

3.2

| Capacity

retention rate

| remain capacity ≥90%| After the normal charge, store the battery at @25±5℃ for two months., then discharge capacity @0.2C, the retention capacity accord with criterion.

BMS function

This battery pack has a battery management system (BMS), which can monitor the operation status of the system through Bluetooth, providing over-discharge, overcharge, over the current, short circuit, over-temperature and low- temperature protection, display, heating, and CAN communication.

BMS parameters

No| Item| Content|

Criterion

---|---|---|---

4.1

| Over

charge

| Over-charge protection for each cell| 3.75±0.05V
Over-charge release for each cell| 3.55±0.1V
Over-charge release method| Under the release voltage
4.2| Over discharge| Over-discharge protection of each cell| 2.3±0.1V
Over-discharge release for each cell| 2.4±0.10V
Discharge over discharge release| Charge or Cut load

4.3

|

Over

current

| Discharge over current warning| 700±50A
Discharge over current delay| ≤100ms
Discharge over the current release| Auto release or Cut load
4.4| Short circuit| Short circuit protection value| 900A(<100us)
4.5| Internal

resistance

|  | <5mΩ

4.6

| Cell balancing| Cell Balance Threshold| ≥3400mV
Cell Balance Current| 50±20mA

Bluetooth function interface

Function Description

Heating function description

  • A. The heating function adopts BMS to control the heating film, and the protection plate can start the heating mode by collecting the temperature and current;
  • B. Heating film: The main cross-sectional structure of the diaphragm includes polyimide film
    (0.08), heating element (0.05), and polyimide in order Membrane (0.08), double-sided tape (0.11) with a total thickness of 0.36±0.1MM, strong adhesion and no cracking after long-term use;

Working mode: Charging working mode: after the charging device is connected to the battery, the protection board performs current detection. If the current is less than 5A, the battery can be charged; if the current is more than 5A, the protection board needs to detect the temperature: a, when the temperature is less than 0 ℃, turn on the heating film, the temperature When heated to above 0 ℃, the battery can be recharged, continue to heat until the temperature≥ 15 ℃ to stop heating. b. When the temperature is ≥0℃, it can be charged without heating.

Display

CAN
The BMS has the function of battery pack upload to CAN communication, 500K baud rate CAN communication interface adopts 8 P8C network interface. You can communicate with the Victron Cerbo GX box.

Dimension

Transport & Store

  • Lithium-ion batteries are hazardous goods. Therefore the following points must be observed when transporting the battery modules:
  • Observe the general transport regulations based on the mode of transport as well as all legal regulations.
  • No fall down, no pile up over 5 layers and keep face up.
  • Check the battery immediately after transporting the battery.

If a user finds shell deformation in the battery pack, don’t use it and contact us.

Warning & Tips

Please read and follow the handling instructions before use. Improper use may cause heat, fire, rupture, damage or capacity deterioration of the battery. HAICEN.Describes is not responsible for any accidents caused by the usage without following our handling instructions.

Warning

  • Battery must be far away from heat source, high voltage, and no exposed in sunshine for long time.
  • Never throw the battery into water or fire.
  • Never reverse two electrodes when use the battery.
  • Never connect the positive and negative of battery with metal.
  • Never knock, throw or trample the battery.
  • Never disassemble the battery without manufacturer’s permission and guidance.
  • Never use mixed with other type of battery.

Tips

  • Keep the battery against high temperature. Otherwise it will cause battery heat, get into fire or lose some function and reduce the life.
  • When battery run out of power, please charge your battery timely (≤15day).
  • Please use the matched or suggested charger for this battery.
  • If battery emit peculiar smell, heating, distortion or appear any abnormity, please stop using.
  • If the battery leaks and get into the eyes or skin, do not wipe, instead, rinse it with clean water and see doctor immediately.
  • Please far away from children or pets.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals