Haicen HC12V225 Lithium Cells Smart Batteries Instruction Manual

June 1, 2024
Haicen

Haicen-LOGOHaicen HC12V225 Lithium Cells Smart Batteries

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-PRODUCT

Specifications

  • Normal capacity: 112.5A
  • Nominal energy: 45A
  • Nominal voltage: 200A
  • Internal resistance: Approx. 26kg
  • Normal charge voltage: 10V
  • Float charge voltage (for Standby use): -2045 (charging current less than 5A), 045 (charging current over 5A)
  • Allowed MAX charge current: -2060
  • Recommended charge current: 3%/Month; 15%/year
  • Allowed MAX discharge current: -20+354575%RH, 15304575%RH

Product Usage Instructions

General Information

This specification defines the performance of the rechargeable LiFePO4 battery pack HC12V225 manufactured by HAICEN. It describes the type, performance, technical characteristics, installation, warnings, and cautions of the battery pack.

Battery Performance

The battery cycle life is defined at various Depth of Discharge (DOD) levels. Ensure proper charging and discharging cycles to maintain battery health and longevity.

BMS Function

The battery pack includes a Battery Management System (BMS) that monitors various parameters and provides protection against overcharge, over-discharge, over-current, short circuit, over-temperature, and low-temperature conditions.

Bluetooth Function Interface

The battery pack features a Bluetooth interface for monitoring and controlling the BMS wirelessly.

Function Description

The BMS offers functions such as heating, display, and CAN communication for seamless integration with compatible devices like the Victron Cerbo GX box.

Dimension

Refer to the product manual for detailed dimensions of the battery pack for installation purposes.

Transport & Store

Lithium-ion batteries are hazardous goods and must be handled, transported, and stored with care following the recommended guidelines to ensure safety.

FAQ

  • Q: How do I know if my battery pack is fully charged?
    • A : The recommended charge voltage for the battery pack is 10V. Use a compatible charger that indicates when the battery reaches this voltage to know it is fully charged.
  • Q: Can I use the battery pack in extreme temperatures?
    • A: The operating temperature range for charging is -2045°C  (charging current less than 5A) to 045°C (charging current over 5A)and for discharging is -2060°C. Avoid using the battery pack outside these temperature limits.

Preface

Thank you so much for buying lithium batteries from HAICEN Be sure to finish reading before installation/use; So you can use the lithium pack properly. After reading it, please keep it safe! If there is any ambiguity about this specification, or if you need to discuss technical issues, please contact our company!

General Information

This specification defines the performance of the rechargeable LiFePO4 battery pack HC12V225 manufactured by HAICEN. describes the type, performance, technical characteristics, installation, warning and caution of the battery pack. Battery Specification(@ 25±5℃)

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-FIG1

Battery Performance

  • Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~85%.
  • Normal charge : Charge battery under CC(0.2C)/CV(14.4V) mode until over charge protection or the charge current reduce to 0.02C, and then rest for 0.5h.

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-FIG2

BMS function

This battery pack has a battery management system (BMS), which can monitor the operation status of the system through Bluetooth, providing over discharge, overcharge, over current, short circuit, over temperature and low-temperature protection, display, heating,CAN communication。

BMS parameters

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-FIG3

Bluetooth function interface

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-FIG4

Function description

Heating function

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-FIG5

  • A. The heating function adopts BMS to control the heating film, and the protection plate can start the heating mode by collecting the temperature and current;
  • B. Heating film :The main cross-sectional structure of the diaphragm includes polyimide film (0.08), heating element (0.05), and polyimide in order Membrane (0.08), double-sided tape (0.11) with a total thickness of 0.36± 0.1MM, strong adhesion and no cracking after long-term use; Working mode: Charging working mode: after the charging device is connected to the battery, the protection board performs current detection. If the current is less than 5A, the battery can be charged; if the current is more than 5A, the protection board needs to detect the temperature: a, when the temperature is less than 0 ℃, turn on the heating film, the temperature When heated to above 0 ℃, the battery can be recharged, continue to heat until the temperature≥ 15 ℃ to stop heating. b. When the temperature is ≥0℃, it can be charged without heating.

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-FIG6

Display

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-FIG7

CAN

Dimension

Haicen-HC12V225-Lithium-Cells-Smart-Batteries-FIG9

Transport & Store

  • Lithium-ion batteries are hazardous goods. Therefore the following points must be observed when transporting the battery modules:
  • Observe the general transport regulations based on the mode of transport as well as all legal regulations.
  • No fall down, no pile up over 5 layers and keep face up.
  • Check the battery immediately after transporting the battery.
  • If a user finds shell deformation of the battery pack, don’t use it and contact us.

Warning & Tips.

Please read and follow the handling instructions before use. Improper use may cause heat, fire, rupture, damage or capacity deterioration of the battery. HAICEN.Describes is not responsible for any accidents caused by the usage without following our handling instructions.

Warning

  • The battery must be far away from the heat source, high voltage, and no exposed in the sunshine for a long time.
  • Never throw the battery into water or fire.
  • Never reverse two electrodes when use the battery.
  • Never connect the positive and negative of the battery with metal.
  • Never knock, throw or trample the battery.
  • Never disassemble the battery without the manufacturer’s permission and guidance.
  • Never use mixed with another type of battery.

Tips

  • Keep the battery at high temperature. Otherwise, it will cause battery heat, get into fire or lose some function and reduce the life.
  • When the battery run out of power, please charge your battery timely (≤15day).
  • Please use the matched or suggested charger for this battery.
  • If the battery emits a peculiar smell, heating, distortion or appear any abnormality, please stop using it.
  • If the battery leaks and get into the eyes or skin, do not wipe, instead, rinse it with clean water and see a doctor immediately.
  • Please be far away from children or pets.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals