Iceagle GmbH Q6 Childrens Multifunctional Chair Instruction Manual
- September 19, 2024
- Iceagle GmbH
Table of Contents
Iceagle GmbH Q6 Children Multifunctional Chair
Specifications
- Model: Q6
- Materials: Steel, PP, PU
- Compliance: EN14988:2017+A1:2020
- Age Range : 6-36 months
Product Usage Instructions
Installation and Setup
- Pull out the bottom of the tray handle for installation.
- Align the fitting plate with the holes on the armrest and insert it securely.
- Release the handle and confirm that the tray is securely in place.
- Adjust the seat height by pressing the height adjustment button to choose from 7 height positions.
- To adjust the seat back angle, squeeze the handle behind the back of the seat and adjust as needed.
- Ensure that the seat back angle is suitable for the baby’s age and weight.
Maintenance and Safety
- Always follow the manufacturer’s instructions.
- Never leave children unattended while using the product.
- Make sure all harnesses are correctly fastened.
- Do not use the high chair if any part is damaged, torn, or missing.
- Position the high chair on a flat, even surface away from any structures or tables.
- Avoid placing the high chair near sources of heat or fire.
- Ensure the child can sit unaided before using the highchair.
- Maximize safety by using the restraint system at all times.
WARNING
-
Follow the manufacturer’s Instructions.
-
Do not leave children unattended.
-
Make sure that any harness is correctly fitted.
-
Do not use the high chair unless all components are correctly fitted and adjusted.
-
Be aware of the risk of an open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the vicinity of the high chair.
-
Do not use the high chair until the child can sit up unaided.
-
Do not use the high chair if any part is broken, torn, or missing.
-
Position the high chair away from solid structures and benches to avoid injuries caused by falls and by access to dangerous items.
-
Use the high chair on a flat, even, and horizontal floor, and do not elevate the high chair on any structure or table.
-
To reduce the risk of injury, advice shall be provided to position the high chair away from furniture, walls, hot surfaces and liquids, window covering cords, and electrical cords and position the high chair away from furniture when the chair is not being used at a table with a tray removed.
-
The maximum mass of the child should be 15KGS.
-
Prevent serious injury or death from falls or sliding out. Always use the restraint system.
-
The child should be secured in the high chair at all times by the restraining system, either in the reclining or upright position. It is recom-
mended that the high chair be used in the upright position only by children capable of sitting upright unassisted. -
It is suitable for 0-36 months kids.
-
Be sure the user is familiar with the product instructions, and easily expand and collapse, not use it by force.
-
Do not let the baby clim ,play, or hang in the high chair.
-
To avoid the danger of suffocation, remove the plastic cover before using. This cover shall be destroyed or kept away from babies and children.
-
Always apply the parking device when it is not being moved. If relevant, a statement to keep children away when unfolding and folding the product to avoid injury.
Maintenance of Common Sense
- Do not place the chair in the sun exposure for a long time.
- The cushion cannot be dry-cleaned, dried by machine, or iron.
- Please Clean the seat cushion: Remove the seat cover, with a mild detergent to clean and maintain dry naturally.
- Please often examine the chair to check whether there are any loose or damaged connections, and stop using it once any damage.
- Please carefully follow the instruction manual to avoid tunnel
PARTS
- Seat back angle adjustment button
- Belt anchorage holes
- Cloth cover retention hooks
- Seat height adjustment button
- Frame collapse button
- Anti-slip seal
- Five-point harness
- Tray
- Dinner plate Hook
- By turning the button tray
- Chair leg
Warning: Keep baby away when assembly.
INSTALL AND USE
-
Insert the product out of the box, (please properly handle bags) hold the seat height adjustment button, and raise the seat.
-
Press the round button on both sides to expand the largest state and release the button, make sure it is locked.
-
Press the round button on both sides to make sure the chairs collapse.
-
Pull out the bottom of the tray handle demolition, while the installation fitting plate is aligned with the holes on the armrest insert. Insert it all the way, release the handle, and pull back to confirm that the tray is securely in place.
-
Pull out the tray at the bottom of the handle when disassembly or repair is required. Then you can remove the plate by pulling out the tray.
-
Pull out the bottom of the tray handle to disassemble. When you see a red dot, the tray can be turned on.
-
Press the button on the side of the tray and the tray can be flipped down.
-
When using the chair normally, remember not to remove the board to
-
Press the seat height adjustment button to adjust 7 height positions
-
When the seat belt buckles, the waist buckle (which comes with shoulder strap buckles) snaps into the separator until you hear a “click” sound. When unfasten their seat belts, pressing the middle button will automatically pop up on both sides of the buckle.
-
The safety belt strap has two height options. Remove the start behind the back when adjusting the height of the shoulder strap, and pull out from the back seat, the shoulder strap when installing the seat cushion and inserted into the slot on the back can be. ( Note: You must use seat belts when using a baby chair.)
-
Squeeze the handle to adjust the seat back behind the back, then the front-rear direction biasing, you can adjust depending on the desired angle of the seat back. Five-speed back angle can be adjusted.
( Note: only for use in the vertical position back more than 6 months baby weighing less than 15kg loungers mode is not suitable for long sleep,this product is not available as an alternative to the use of a small bed.)
SPECIFICATION
Iceagle GmbH
Ludwig-Erhard-Str. 27, 93073 Neutraubling, Germany:
info@iceagle.eu
Frequently Asked Questions
- Q: What is the maximum weight capacity for the high chair?
- A: The maximum weight for a child should not exceed 15 kg.
- Q: Can the seat height be adjusted?
- A: Yes, the seat height can be adjusted to 7 different positions.
- Q: How do I clean the seat cushion?
- A: Remove the seat cushion and clean it according to the manufacturer’s instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>