tehnoteka DCH-350 Dron Denver Electronics Instruction Manual

: September 19, 2024
: tehnoteka

Table of Contents

DCH-350 Dron Denver Electronics
Product Information
Specifications:
- Product Usage Instructions
Battery Installation & Charging:
Drone:
Remote Control:
Calibration Reset:
Headless Mode:
Standard Operation Steps:

DCH-350 Dron Denver Electronics

“`html

Product Information

Specifications:

Model: DENVER DCH-350
Recommended Age: 14+
Battery Requirements: 3 x 1.5V AA batteries (not included)
Charging: USB connector

Product Usage Instructions

Battery Installation & Charging:

To install batteries: Open the cover of the battery case, insert
3 x 1.5V AA batteries, according to indicated polarity. Make sure
to use new batteries and do not mix different types.

To charge: Connect one side of the USB connector with the
battery and the other side into any USB port of a computer or
smartphone charger.

Drone:

When replacing damaged blades, ensure to match the rotor types
(A or B) with the corresponding motors on the drone.

Remote Control:

Follow the instructions on the remote control for various
functions such as photo, video, throttle control, speed adjustment,
take-off/land, and headless mode.

Calibration Reset:

Before first flying, perform Calibration Reset by pulling the
throttle and rudder to the bottom left corner simultaneously for 3
seconds. This ensures stable flight of the drone.

Headless Mode:

To enter Headless Mode, press the corresponding button on the
controller. This mode fixes the drone’s direction relative to the
controller’s orientation.

Standard Operation Steps:

Turn on the controller
Turn on the drone
Place the drone on a flat surface
Connect the controller with the drone by pushing the throttle
up and down
To start motors: follow one of the three methods provided

Frequently Asked Questions (FAQ):

Q: Can I use rechargeable batteries with the drone?

A: Yes, you can use rechargeable AA batteries with the DENVER
DCH-350 drone.

Q: How do I know if the drone is properly calibrated?

A: The LED lights on the drone will stop flashing and remain
steady once Calibration Reset is complete.

“`

https://tehnoteka.rs
Uputstvo za upotrebu (EN)
DENVER DCH-350 dron
Tehnoteka je online destinacija za uporeivanje cena i karakteristika bele tehnike, potrosacke elektronike i IT ureaja kod trgovinskih lanaca i internet prodavnica u Srbiji. Nasa stranica vam omoguava da istrazite najnovije informacije, detaljne karakteristike i konkurentne cene proizvoda. Posetite nas i uzivajte u ekskluzivnom iskustvu pametne kupovine klikom na link: https://tehnoteka.rs/p/denver-dch-350-dron-akcija-cena/

DCH-350
denver.eu
22/03/2023

For age 14+
Denver DCH-350
DENVER.EU www.facebook.com/denver.eu Please read this instruction manual carefully before using the product
ENGLISH Notice: 1 Instructions Please read the user handbook carefully and then keep it in a safe place for future consultation and maintenance. 1.1 Important Notice (1) This product is not a toy, it’s a piece of complicated equipment which integrated with professional knowledge by mechanic, electric, air mechanics, high-frequency transmitter and so on, so it should be installed correctly and adjusted to avoid any accidents. The owner must always operate in a safe manner, if improper operation that caused human injured or property damage, then we DENVER A/S accept no liability for any safety duties from operation. As we have no control over the way they maintained, used and operated. (2) This product is not suitable for users under 14 years of age. (3) The use of the drone may be prohibited in some areas like train stations, airports, aircrafts, inhabited areas etc. You should check with the authorities whether the use of the drone is permitted in some public or private areas. Always use the drone bearing in mind not to breach people’s privacy. We exclude liability for any wrong use of the drone.
ENG 1

(4) We DENVER accept no liability for any safety duties or fines arising from operation, usage or miscontrol after the sale of products. Warranty does not cover if drone crashes and get damaged. 1.2 Safety Precautions Keep away from crowd when flying, since drone flight is a high-risk hobby. Misassembled or broken main frame or defective electronic equipment or unskilled operation may cause accidents of machine damaged or injured. Please pay special attention to safety operation. (1) Keep away from people and obstacles “The flying speed and status of the drone is uncertain, so it may cause potential danger.” When choosing a flying site should stay clear of buildings, trees and power lines. AVOID flying in or near crowded areas. Meanwhile avoid flying in rain, storms, thunder and lightening to protect machinery and parts out of damage. (2) Keep away from humid environments Inside of drone is made up of precise electronic components. Stay away from humidity or water vapor to protect machinery and parts. (3) Safety operation Please fly your drone according to your physical status and flight skill. Fatigue, listlessness and mis-operation will increase possibilities of accidental hazard. (4) Keep away from rotating blades Keep your face and body as well as all spectators away from the rotating blades. The spinning blades of a model of this type can cause serious injury. (5) We recommend flying the drone below 10 meters of height. (6) Keep away from heat A drone is made up of metal, fiber, plastic, electronic components, etc. Keep it away from heat and sunshine to avoid distortion, and damage. 1.3 Check List Before First Flight (1) Flying field should be in an open space and we suggest at least 5M length 5M wide 3M height. (2) Make sure the receiver and transmitter is fully charged. (3) Please strictly obey the order of turn-on, turn-off before operation. When starting your flight, first turn on the transmitter, and connect the battery with drone last; When finishing your flight, please disconnect the battery from your drone first, turn off transmitter last. An upset in the order of connection may cause your drone loose control to threaten yourself and others safely. Please follow a correct habit of turn-on and turn-off. (4) Make sure the connection is solid between battery or motor. The ongoing vibration may cause bad connection of power terminal and make the drone uncontrollable.
ENG 2

Battery Installation & Charging
Controller

3 x 1.5V AA batteries

Battery cover

To install batteries: Open the cover of battery case, insert 3 x 1.5V AA batteries, according to indicated polarity (batteries not included).
Battery installation should be done under adult supervision only! Do not mix old and new batteries. Do not mix different types of batteries.

Charging
Connect one side of the USB connector with the battery, and the other side into any USB port of computer or a smartphone charger (not included).

Drone

Replacing the damaged blades:

Your set will come with 4 spare rotors, two type A (A1=A2)

and two type B (B1=B2). You will see the “A” and “B” word A

B

on the canopy, then put the rotor on the motor

accordingly

B

A

ENG 3

Remote Control
2. Photo / Video
Photo: short press Video: long press
4. Left joystick (Throttle)
(Ascend/Descend/ turn left/turn right)
6. Start motors 8. Emergency stop 10. Turn left/right trim 12. Speed Down 14. Speed Up

1. Power ON/OFF 3. Flip
5. Right joystick (Rudder)
(Forward/Backward/Leftward/Rightward)
7. Headless / Reverse
11. Leftward / Rightward trim
9. Take off / Land
13. Forward/Backward trim

Calibration Reset (Very important!)
Before first flying, Calibration Reset is necessary to be done, to make sure the drone will fly stably: Pull the throttle and rudder to Bottom Left corner at the same time for 3 secs, the LED lights on the drone flashes quickly, then let go the throttle and rudder. The LED lights on the drone stops flashing and keeps on. Calibration Reset complete.
Headless Mode
Start / Quit Headless Mode Press the button on controller (as picture) you will hear beep sounds, then you get into headless mode and lights flash on the drone. Press it again to quit. At the moment when you start headless mode, the direction that controller is pointing to will be fixed as the directions of drone. No matter how you rotate the drone, the front direction won’t change accordingly.
Front

Standard Operation Steps

1. Turn on the controller

2. Turn on the drone
(LED lights on the drone flashes slowly)

3. Place the drone on a flat surface

4. Push the throttle up and down, a beep will sound: controller has connected with the drone
(LED lights on the drone stops flashing)

5. To start motors (3 methods): a. Push the throttle to the top position and release it quickly. b. Press button `Start motors’ c. Pull the Throttle to the bottom left corner and Rudder to bottom right corner at the same time.

ENG 4

6. Press [Take-off], drone flys up and hovers at a fixed height; Press [Land], drone lands on the ground and motors stop. Press [Emergency], all motors stop and drone fall down directly

Left

Right

Back
One Key Reverse
Press and hold this button (as picture), and you will activate One Key Reverse and the drone will now attempt to fly back towards its starting direction. If you want to deactivate this mode, then push the right joystick (Rudder) to any direction. Note: The drone will not land automatically, you still need to control the height of the drone when using the one key reverse flying mode.
Take Photo & Video
1. Insert the microSD card correctly into the camera when the drone is OFF. 2. Connect the camera to the drone by the standard power wire. 3. Power on the drone and connect it to the remote controller as per `Standard Operation Steps’ . 4. When the drone is in the air, press the PHOTO button, then one photo will be taken and
ENG 5

saved into the microSD card (NOT included!) automatically. Meanwhile, the indicator light inside the camera makes a quick flash. 5. Press and hold the VIDEO button, the camera will start recording and the indicator light inside the camera keeps flashing. Press it again, the video will be saved into the microSD card and camera stops recording. 6. To enjoy the photo and video captured, power off the drone first and remove the microSD card from camera, then connect it to any computer.

Flips and rolls

After you have the basics of flying, you’re ready to learn flip and roll your drone. To perform a flip or roll, press the Flip button, make sure the drone is at least 3 meters off the ground and quickly push the Rudder, in either direction to make the drone flip or roll. Once the manoeuvre is completed, steady the drone.
Main Accessories

Li-po Battery

Blade

x4
Blade guards

Landing feet

USB Charge cable

Remote controller

Camera

ENG 6

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste materials (discarded electric and electronic equipment and batteries) are not handled correctly.

Electric and electronic equipment and batteries are marked with the crossed out trash can symbol, as below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Hereby, Denver A/S declares that the radio equipment type DENVER DCH-350 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: Please enter: denver.eu and then click the search ICON on topline of website. Write model number: dch-350. Now enter product page, and red directive is found under downloads/other downloads. Operating Frequency Range: 2458 MHz – 2473 MHz Max Output Power: 25.9 W

DENVER A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark www.facebook.com/denver.eu

Warning! – Lithium battery inside ! – Do not try to open the device! – Do not expose to heat, water, moisture or direct sunlight!
ENG 7

Contact
Nordics
Headquarter Denver A/S Omega 5A, Soeften DK-8382 Hinnerup Denmark
Phone: +45 86 22 61 00 (Push “1” for support)
E-Mail For technical questions, please write to: support.hq@denver.eu
For all other questions please write to: contact.hq@denver.eu
Benelux
DENVER BENELUX B.V. Barwoutswaarder 13C+D 3449 HE Woerden The Netherlands
Phone: 0900-3437623
E-Mail: support.nl@denver.eu
Spain/Portugal
DENVER SPAIN S.A Ronda Augustes y Louis Lumiere, nº 23 nave 16 Parque Tecnológico 46980 PATERNA Valencia (Spain)
Spain Phone: +34 960 046 883 Mail: support.es@denver.eu
Portugal: Phone: +35 1255 240 294 E-Mail: denver.service@satfiel.com

Germany
Denver Germany GmbH Service Max-Emanuel-Str. 4 94036 Passau
Phone: +49 851 379 369 40
E-Mail support.de@denver.eu
Fairfixx GmbH Repair and service Rudolf-Diesel-Str. 3 TOR 2 53859 Niederkassel
(for TV, E-Mobility/Hoverboards/Balanceboards, Smartphones & Tablets)
Tel.: +49 851 379 369 69 E-Mail: denver@fairfixx.de
Austria
Lurf Premium Service GmbH Deutschstrasse 1 1230 Wien
Phone: +43 1 904 3085 E-Mail: denver@lurfservice.at
If your country is not listed above, please write an email to support@denver.eu

DENVER A/S Omega 5A, Soeften DK-8382 Hinnerup
Denmark
denver.eu facebook.com/denver.eu

Version 1.1

https://tehnoteka.rs
Ovaj dokument je originalno proizveden i objavljen od strane proizvoaca, brenda Denver, i preuzet je sa njihove zvanicne stranice. S obzirom na ovu cinjenicu, Tehnoteka istice da ne preuzima odgovornost za tacnost, celovitost ili pouzdanost informacija, podataka, misljenja, saveta ili izjava sadrzanih u ovom dokumentu. Napominjemo da Tehnoteka nema ovlasenje da izvrsi bilo kakve izmene ili dopune na ovom dokumentu, stoga nismo odgovorni za eventualne greske, propuste ili netacnosti koje se mogu nai unutar njega. Tehnoteka ne odgovara za stetu nanesenu korisnicima pri upotrebi netacnih podataka. Ukoliko imate dodatna pitanja o proizvodu, ljubazno vas molimo da kontaktirate direktno proizvoaca kako biste dobili sve detaljne informacije.
Za najnovije informacije o ceni, dostupnim akcijama i tehnickim karakteristikama proizvoda koji se pominje u ovom dokumentu, molimo posetite nasu stranicu klikom na sledei link: https://tehnoteka.rs/p/denver-dch-350 -dron-akcija-cena/
Powered by TCPDF (www.tcpdf.org)