Vairema K6B-TB Smart Lock User Manual

Vairema K6B-TB Smart Lock User Manual

Special Attention:

1. Please replace for the battery when low wattage alarm.
2. Reading this manual carefully before installation, and keep it for future reference.

Introduction

Lock structure

Packing List

Check the following drawing to check whether the package contains all the parts

Specifications

Fingerprint: 200 Password: 150
Card: 200
Color| Black| Working Temperature| -10℃-55℃
---|---|---|---
Low Wattage Alarm| Less than 4.8V| Working Humidity| 0-95%

System Initialisation

Open the panel and the battery cover, long press the “Pick-proof” button on the back panel, insert the battery and hold for 5 seconds, and the initialisation is complete

Installation

Step 1 Take down the panel
Press the button like the picture, and slide the panel.

Step 2 Install the battery

1. Loose the screw
2. Insert the battery and tighten the screw
   

Step 3 Install panel and compete
Press and slide up the panel. Install compete

Operation

Registration

The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play, Pyongyang, Baidu, Ali, 360, Aweigh, and Xiaoping.

Connect lock to the phone

1. please scan the QR code to download the app
2. You can also search for TT Lock in the APP store(Google Play)to download
3. Register a new account (phone number or email) or login with an existing account.
4. Touch the lock screen to light, click “+ Add Lock”
5. The lock nearby will appear on the phone screen, Click “+”
6. Re-name the lock
7. The lock added successfully
   

TT Lock users can register the account by mobile phone and Email which currently support 200 countries and regions on the world. The verification code will be sent to user’s mobile phone or email, and the registration will be successful after the verification.

Add locks

TT Lock supports multiple types of lock devices. The lock needs to be added by the app after entering the add mode. Generally, a lock that has not been added, as long as the lock keyboard is touched, it will enter the add mode. The default password is 123456 if not added by the phone.

User Management

Bluetooth management

Make sure there is no problem with Bluetooth communication. After connecting the phone to the door lock as above, Click ” “to unlock.(the phone is within 5 meters from the door lock)

Setting Passcode

Passcodes are also a way to unlock. After entering the passcode on the locked keyboard, press the unlock button in the lower right corner to unlock. Passcodes are divided into permanent, time-limited, single, clear, cycle, and custom.(You can share the Pass code to other user via We Chat、SMS、Email、Messenger、Whats App)

Send e-Key

Click on the ” ” as shown in figure, you can send the e Key to other users of TT lock to authorise the unlock(the receiver must be download the APP and set up an account)→ Select e-key format (Timed, permanent, One-time, Recurring) → Enter recipient’s account of TT lock,set the name and effective time of the e Key, Can choose to allow remote unlocking or disallowing, authorized administrator or not authorized, as shown in figure →Send→The recipient’s account has Bluetooth unlock permission.

Add card

Supports opening doors through various IC cards. Before an IC card is used to open the door, it needs to be added first. The adding process needs to be performed by the a pp beside the lock.The validity period of the IC can be set, it can be permanent, or it canbe limited in time.

e-Key management
Click “ “ The manager can delete ekey, reset ekey, send and adjust the ekey, meanwhile he can search the lock record.

Passcode management
Click “ ” .All generated passwords can be viewed and managed in the password management module. This includes a password change, password deletion, password reset, and password unlock record.

Unlock records
Click “ “you can query your unlock record as shown in figure.

Connect with other lock

When K6 connect with the other lock, the K6 will be a remote control to unlock the other lock. When the K6 unlock, the B lock unlock as well.

If the other lock called B lock

1. Press “*”+”813”+”#” → verify Administrator pass code +”#” → “1”+”#” on the K6, and the K6 enter Pairing Mode.

2. After adding B lock to the TT Lock, click to enter the interface, then click “Add Remote”, click “Next” to add.
   

3. Connect completely. You can use K6 to control the B Lock.

Gateway management(Optional)

The TT lock is directly connected via Bluetooth, that is why it is not attacked by the network. The gateway is a bridge between smart locks and home WIFI networks. Through the gateway, the user can remotely view and calibrate the lock clock, read the unlock record. Meanwhile, it can remotely delete and modify the password

Add Gateway

Light Status

Light flashes alternately in red and blue : Stand-by mode, ready for pairing
Blue light : Working mode
Red light : Network failure

Pair the Gateway with APP

1. Activate the APP

2. Press

3. Select [Gateway)

4. Select [G2]

5. Plug in the gateway and power it on, while the light flashes alternately in red and blue
   

6. Press”+” sign

7. Add Gateway
   

8. Select the network and fill in the password
   

9. Add complete

Notice: If times out, please power off and try it again.

Manual

After a short period of time, you can see which locks are in their coverage in the app.
Once the lock is bound to the gateway, the lock can be managed through the gateway

FAQ

unlock verification in any method, than the passage mode will take effect.
3 What is the purpose of Auto Lock| You can set how long to lock after unlocking
4 After installation, touch sensing keyboard, screen no respond| a) In this case, first check that the positive and negative electrodes of the battery have been installed upside down, whether the battery has enough power
b) Remove the back panel and see if it’s connected.
c) To eliminate the above situation, you need to remove the lock ,check whether the wires of the lock body are squeezed, and the re-wire.
5 Unable to register fingerprint| Check the fingers for dirt or wear, check the fingerprint head on the lock for dirt and oil stains, etc.Check to see if   the   fingerprint   is   working properly(Press to see if there is any responds.
6 What is the reason why the smart lock consumes fast power?| a) Large standby power consumption
b) Short circuit
7 There is no response to pressing the handle on outside the door, and there is unlock normally on inside the door, but the verification is normal, and the motor is normal.| It may be the triangle direction on the clutch was error, please check correction.
8 How many times will the password be locked? How long is it locked?| Enter the wrong password more than 5 times in a row, the keyboard is locked for 5 minus, Other ways to can open the door

Guarantee

Customer Name:….
Customer Calls:….
Purchase Date:…..
Product Name:…..
Product Model:…..

Note:

1. Please keep this card so that you can use it when you need warranty service.
2. We provide you with a one-year warranty from the date of purchase.
3. This warranty service is valid for customers in any country in the world.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>