VAIREMA 92214 SLIM SmartHome Wi-Fi Telephone Entry System Instruction Manual

VAIREMA 92214 SLIM SmartHome Wi-Fi Telephone Entry System

Overview

Wire connection

Exit button (Only some models support Exit button)

Restore factory settings:
Press and hold the call button for 3-5 seconds within 1 minute after the outdoor unit is power on, the button light will turn off and the outdoor unit will restart automatically

92214 keypad operation

Settings

Memory reset

• Press the SET button for 3s and release until a long beep is heard.
• Shortly press it for 3 times and 3x long beep is heard.

Master password setup

• In standby mode enter the master password (the default master password is 123456) and press # button to enter settings mode. A double long beep sound will be heard.
• Press 0 and # buttons to enter into master password setup mode. One long beep sound will be heard.
• Enter a new 6-digit password and press # button. One long beep sound will be heard.
• Press * button to exit into standby mode. A double-short beep sound will be heard.

Unlock password setting

• In standby mode enter the master password (the default master password is 123456) and press # button to enter settings mode. A double long beep sound will be heard.
• Press the 1 and # buttons to enter into user password setting mode. One long beep sound will be heard.
• Set the 3-digit cell number from 000 to 199, and press # button. One long beep sound will be heard.
• Set a new 6-digit user password and press # button. One long beep sound will be heard if successfully added. If the current cell is already occupied then a double short beep sound will be heard.
• Users can add new passwords for new cell numbers. Set new 6-digit user passwords after setting a new cell number. Press # to confirm.
• Press the * button twice to exit into standby mode. A double short beep sound will be heard

Example:
Add 333333 password into 003 cell number and 444444 password into 004 cell number.

• 123456#1#003#333333#**
• 123456#1#004#444444

Unlock password deleting

1. In standby mode enter a master password (the default master password is 123456) and press the # button to enter settings mode. A double-long beep sound will be heard.
2. Press the 2 and # buttons to enter into the user password deleting mode. One long beep sound will be heard.
3. Set the 3-digit cell number from 000 to 199, and press the # button to delete the password. One long beep sound will be heard. Enter 99 instead of the cell number and press the # button to delete all user passwords.
4. Users can continue deleting passwords by entering their cell numbers and pressing the # button after each cell number.
5. Press * button twice to exit into standby mode. A double short beep sound will be heard.

Example:
Delete passwords from 003 and 004 cell numbers:

• 123456#2#003#**
• 123456#2#004#**
• delete all passwords:
• 123456#2#99#**

RFID key setting

1. In standby mode enter the master password (the default master password is 123456) and press # button to enter settings mode. A double long beep sound will be heard.
2. Press the 3 and # buttons to enter into wireless unlock key setting mode. One long beep sound will be heard.
3. Enter a 3-digit cell number from 000 to 199, and press the # button. One long beep sound will be heard.
4. Add the keys one by one to the recognized area within the 20s. One long beep sound will be heard if successfully added.
5. If a double short beep sound is heard that means the current cell number is already used.
6. Users can add extra new keys for new cell numbers. Set the New cell number and press #, and add the new keys to the recognized area one by one within the 20s.
7. Press the * button twice to exit into standby mode. A double short beep sound will be heard.

Example:

• Add RFID key into 003 cell number
  123456#3#003# Add the RFID keys near the recognized area**

• Add RFID key into 004 cell number
  123456#3#004# Add the RFID keys near the recognized area**

Tips: Alternative way to add unlock keys :

• Standby mode press the SET button shortly →
• Reader the keys one by one → Press SET to exit

RFID key deleting

• In standby mode enter the master password (the default master password is 123456) and press # button to enter settings mode. A double long beep sound will be heard.
• Press 4 and # buttons to enter into wireless unlock key deleting mode. One long beep sound will be heard.
• Enter 99 and press # button to delete all RFID keys

Example:
Delete all keys 123456#4#99#

Keyboard backlight setup

1. In standby mode enter the master password (the default master password is 123456) and press the # button to enter settings mode. A double long beep sound will be heard.
2. Press 7 and # buttons to enter into keyboard backlight setup mode. One long beep sound will be heard.
3. Modes for options
   • 00# – keyboard backlight disabled all the time
   • 01# – keyboard backlight enabled all the time
   • 02# – keyboard backlight enabled in working mode and disabled in standby mode.
4. Press * button to exit into standby mode. A double short beep sound will be heard.

Example:
Enable keyboard backlight only in working mode 123456#7#02#*

92208-D & 92223-E RFID key operation

WORK WITH MASTER KEYS A (ADD) and D (DELETE)
Press the Setting button at the back of the outdoor call panel. After hearing a single beep, swipe the master key A and D on the key reader area of the outdoor call panel one by one. Pressing the Setting button at the back of the outdoor call panel again will put the outdoor call panel into standby mode.

RFID key adding
Bring the blue master key “A” to the Key reader area of the outdoor call panel to activate the adding keys mode. Add the guest keys one by one on the key reader area of the outdoor call panel within 20 seconds. The total volume of the keys could not exceed 200pcs. Touching the master key “A” again will switch the outdoor call panel to standby mode.

RFID key deleting
Bring the blue master key “D” to the Key reader area of the outdoor call panel to activate the deleting keys mode. Delete the guest keys one by one on the key reader area of the outdoor call panel within 20 seconds. Touching the master key “D” again will switch the outdoor call panel to standby mode.

Installation diagram

NOTE：

• Do not install the call panel in this environment e.g. Straight sunshine, contact rain, high temperature, high humidity, full of dust, and chemistry corrosive.
• Switch off power supply before installation.
• Keep more than 30cm away from the AC power supply to avoid external interference.

Outdoor installation

Installation process:

1. First drill 4mm~6mm diameter holes on wall
2. Install the rain cover with the 4pcs expansion bolts & screws
3. Connect the wires through the hole
4. Fasten the bottom screw

Due to the regular upgrades of systems and products, could not guarantee exact consistency between the actual product and the written information in this manual.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>