gilman GVC150RD Cordless Stick Vacuum Cleaner Instruction Manual

: September 19, 2024
: gilman

Table of Contents

GVC150RD Cordless Stick Vacuum Cleaner
Specifications:
Product Overview:
Charging:
Assembly & Operating Instructions:
Accessories:
Cleaning and Storage:
Installation:
Troubleshooting:
FAQ:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GVC150RD Cordless Stick Vacuum Cleaner

“`html

Specifications:

Model: GVC150RD
Brand: Gilman Group
Voltage: 22.2V
Features: Motorized bed brush, LED floor brush, 2-in-1 crevice
tool, narrow nozzle

Product Overview:

The 22.2V Cordless Stick Vacuum Cleaner with Motorized Bed Brush
offers a convenient and efficient cleaning solution. It includes
various components such as a handle, main unit, speed mode button,
battery level indicator, dust container, aluminium tube, LED floor
brush, air outlet, and more.

Charging:

Before initial use, charge the vacuum cleaner for approximately
4-5 hours. Note that the vacuum cleaner cannot be operated while
charging.

Assembly & Operating Instructions:

After a full charge, press and hold the power button to start
the operation. Press the button once to change to high speed and
press again to stop the operation. Avoid touching the electric
brush roller when in use to prevent injuries.

Accessories:

Assemble the 2-in-1 crevice tool or narrow nozzle with the
handheld unit by following the release button instructions.

Cleaning and Storage:

Empty the dust container regularly and clean accessories
thoroughly before reassembling. Ensure the motorized bed brush is
maintained properly for optimal performance.

Installation:

Mount the wall hanger securely on the wall and hang the vacuum
cleaner for storage. Follow the provided instructions for proper
installation.

Troubleshooting:

Vacuum cleaner does not run: Check power source and
connections.
Abnormal machine sound: Turn off the vacuum cleaner and inspect
for obstructions.
Weakened suction power: Clean or replace filters as
needed.
LED floor brush issue: Ensure proper assembly and
connections.
Dust spurts out: Check for clogs and clean filters.

FAQ:

Click here for frequently asked questions

Q: How often should I empty the dust
container?

A: It is recommended to empty the dust
container regularly to maintain optimal performance.

Q: Can I wash the filters?

A: Yes, you can wash the filters, but ensure
they are completely dry before reassembly.

Q: How do I store the vacuum cleaner?

A: Use the wall mount hanger provided to store
the vacuum cleaner securely against the wall.

“`

22.2V CORDLEss sTICK VaCuuM CLEaNER wITh MOTORIzED bED bRush 22.2V
MODEL NO.: GVC150RD
A GILMAN GROUP BRAND 1

Please read and retain for future reference.
saFETY INsTRuCTION – GENERaL
· Use this appliance solely in accordance with these instructions. · This appliance is for household use only, not for commercial purpose. · Remove all packaging material from the appliance before use. · This appliance shall not be used by children of 0 to 8-year old. · This appliance can be used by children older than 8-year old and persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge, but only if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved. · Children should be supervised to ensure that they do not play with the appliance. · Cleaning and maintenance must not be done by children. · Have any repairs carried out solely by a qualified electrician. Never try to repair the appliance yourself. · Do not handle the plug or appliance with wet hands. · Do not immerse the main body in water. · Children shall not play with the appliance. · Do not leave the appliance unattended when connected to the mains supply. · Keep hair, loose clothing, fingers and all parts of the body away from openings of the appliance. · Only use the attachments/accessories supplied with the product.
saFETY INsTRuCTION – ELECTRICITY aND hEaT
· Verify that the mains voltage is the same as that indicated on the rating plate on the appliance before use.
· Make sure that you always use a grounded wall socket to connect the appliance. · Always remove the plug from the wall socket when the appliance is not in use. · Remove the plug from the wall socket by pulling the plug, not the power cord. · Make sure that the appliance, the power cord and plug do not make contact
with water. · Make sure that the appliance, the power cord and plug do not make contact
with hot surface, such as a hot hob or naked flame. · Check the appliance’s power cord regularly to make sure it is not damaged.
Do not use the appliance if the power cord is damaged. If the power cord is damaged, it must be replaced by an electrical technician or a person with similar qualification, in order to avoid any hazards. · Never use the appliance in the vicinity of flammable material.
2

saFETY INsTRuCTION – DuRING OPERaTION
· Make sure your hands are dry before touching the appliance, power cord or plug.
· Do not pick up the appliance if it falls into water. Remove the plug from the socket immediately. Do not use the appliance again.
· Never immerse the appliance, the power cord or the plug in water or any liquid.
· Clean the appliance thoroughly after every use (Please refer to “Cleaning and Storage”section.)
· The appliance can not aspirating an aqueous solution that may contain foaming detergent.
· Do not dismantle the vacuum cleaner while the motor is still operating. · Never use the vacuum cleaner without the filter. · Always keep the openings clean and prevent dust or dirt from blocking the air
passage. Do not put any objects into openings. Do not use with any opening blocked until the obstacles removed. · Never use the vacuum cleaner to suck up explosive, flammable or combustible liquids nor anything that may be still burning such as cigarette butts or ash/ cinders. Never vacuum up toxic materials, organic solvents or acids. · Never vacuum up solid, sharp or piercing objects that may damage the filter. · Do not clean any parts in a dishwasher. · When configuring a rotating brush, do not touch any part of the rotating brush during use, otherwise it may cause mechanical damage. · Do not suck water or other liquids, especially carpet cleaning solution, internal moisture or water may lead to short circuit of electrical appliances; · Do not suck laser printer, copier internal use of toner, color powder, etc., otherwise it may lead to fire or explosion; · Do not suck a large number of gypsums, cement and large pieces of paper, etc., These objects may clog the filter, must be cleaned up in a timely manner; · This product cannot suck toner, lead powder on the battery, cannot be used in dangerous places or industrial production sites, so that non-flooring, ordinary ground, carpet special dust cause damage to the product, and even explode This product can only suck dry garbage, must not be used to suck liquid; · Under extreme use and temperature conditions, the battery may occur leakage, if the skin is uncarefully to be stained with leaking battery fluid, please rinse immediately with water, such as the eyes to get liquid, in addition to rinsing with water, please immediately to the hospital to check treatment; · This product is equipped with a dedicated lithium battery and charger, please do not replace the battery by yourself or use other chargers to avoid damage to the product and cause other hazards. This charger is only suitable for this product, do not use it to charge other battery packs so as not to cause danger.
3

PRODuCT OVERVIEw

17

1. Handle 2. Main Unit 3. Speed mode button 4. Battery level and charging indicator 5. Dust container 6. Aluminium tube 7. LED floor brush 8. Air outlet 9. Dust container releasing button

10. Dust container cover 11. Filter 12. Stainless Steel filter cover 13. Wall hanger 14. 2-in-1 crevice tool 15. Narrow nozzle 16. BS plug 17. Motorized bed brush
4

ChaRGING
Before using your vacuum cleaner for the first time, allow the battery to charge for approx. 4 – 5 hours.
Important note: Please note the vacuum cleaner can not start operation during charging
· When the vacuum cleaner is in use, the indicator light can display the battery power status in real time. When the last light starts to flash, it indicates that the power of the machine is low.
· The vacuum cleaner is equipped with a special adapter, connect the adapter to the socket, the charging indicator lights cyclically light in turn to show that the machine is charging. When three indicator lights are on, the battery power is full.
assEMbLY & OPERaTING INsTRuCTION
warning: Electric brush contains moving parts! In order to avoid personal injury, do not touch the brush roller when the vacuum cleaner is running, such as touching the rotating roller may cause cuts, injuries or other injuries, for vacuum cleaner maintenance, please turn off the machine first, if use with children nearby please pay attention to safety

After fully charging, long press the power on/off button ” ” to start operation, the vacuum cleaner will work under low speed at the beginning, and can short press the button once to change at the high speed. Press one more time to stop operation. (Low-High-Stop,as a cycle)

assemble and Dis-assemble handheld with aluminum tube

· Assemble: Insert the end of the tube into the main handheld unit, after hearing the click sound, then the tube installed in place.
· Dis-assemble: Use one hand to hold the tube, press the release button on the main handheld unit and remove the tube outwards.

Release button

5

assemble and Dis-assemble the LED floor brush / aluminium tube · Assemble: Insert the end of the LED floor brush into the tube, after hearing
the click sound, then LED floor brush installed in place. · Dis-assemble: Use one hand to hold the LED floor brush, press the release
button on the tube and remove the LED floor brush outwards.
Release button
Release button

LED floor brush/ motorized bed brush and the main handheld unit
· Assemble: Insert the end of the LED floor brush/ motorized bed brush into the main handheld unit, after hearing the click sound, then LED floor brush/ motorized bed brush installed in place.
· Dis-assemble: Use one hand to hold the LED floor brush/ motorized bed brush, press the release button on the main handheld unit and remove the LED floor brush/ motorized bed brush outwards.

Release button or

Release button

6

aCCEssORIEs 2-in-1 Crevice tool / narrow nozzle assemble with handheld unit
· A: A crevice tool with a narrow nozzle, which you can use to clean window frames and crevices, etc.
· B: Push unwards the cleaning brush of 2-in-1 crevice tool, you can use to clean delicate or irregular surfaces, furniture, venetian blinds,etc.

Release button Release button

or

A

B

CLEaNING aND sTORaGE
Emptying the dust container
· Check that the appliance is switched off before cleaning any parts. · Press the dust cover release button at the front of the dust container, and
unfasten the dust container from the main handheld unit. · Empty the dust container. · If necessary, rinse the dust container with water gently, let it air-dry completely
before reassemble.

NOTE: The filter can become blocked after some time and can thereby reduce the suction power. It is therefore important that the above mentioned filter determine to replace.
7

Cleaning or replacing the filter The filters can become blocked after some time and can thereby reduce the suction power. It is therefore important that the above mentioned filter determine to replace. · Take out the filter and filter cover, remove the dust container from the ma-
chine, then take out the filter assembly, after that rotate the filter cover counterclockwise to remove it from the assembly, and then rotate the filter counterclockwise to remove it.
NOTE: Water could penetrate into the appliance if the filters are not thoroughly dry. This can result in electrical damage, poor suction performace and smelly during operation. warm reminds: Do not place the filter, filter cover in the wet place. The washed filter should be dried naturally. Do not expose the filter or speed up the blow dry with hair dryer, which may damage the filter and shorten its service life. Clean the LED floor brush · The Motorized floor brush can be possibly blocked by big objects or rape
around by hair or long thread.it need to be clean the rolling brush timely. · Press the roller brush release button on the bottom side of the LED floor brush
and toggle backward, then the lock buckle will automatically bounce.
8

· Remove the hairs or dust around the roll brush, rinse the roll brush with water gently, let it air-dry completely before reassemble.

· After cleaned, install the rolling brush inside the motorized floor brush. Make sure the rolling brush is proper seat in position. Slide the sliding switch to lock position.

Clean the motorized bed brush
· Push the sliding open/close lock to the unlock position, push the side cover backward at the same time, and take out the roller brush from the bed brush.
· Remove the hairs or dust around the roll brush, rinse the roll brush with water gently, let it air-dry completely before reassemble.
· After cleaned, install the rolling brush inside the motorized bed brush. Align the end of the roller brush with the inner buckle of the side cover, make sure the rolling brush is proper seat in position, and push the side cover back to the locked position.

Sliding open/close lock

Side cover

Roller brush

NOTE: All accessories must dry thoroughly before installing into the appliance.
9

storage with wall mount hanger · After cleaning, you can store your appliance on the wall mount hanger. Position
the wall mount hanger against the wall and mark the points at which the fastening screws are to be inserted. Using a drill, drill the holes for the screws, insert the plastic anchor provided, then hang the wall mount hanger on the screws, and tighten the screws up to their full extent.
10

TROubLEshOOTING
Warning: Please turn off the vacuum cleaner before maintenance, othecr-
wise it may cause electric shock or other personal injury.

PROBLEM
Vacuum cleaner does not run
The sound of the machine is abnormal The suction power is weakened
The LED floor brush does not work
Dust spurts out when using
Vacuum cleaner stops working automatically

POSSiBLE cAUSES
1. The battery is exhausted 2. The used charger is not
original.
The dust cup is full of garbage, or the airduct is blocked
1. The dust cup is full 2. The filter needs to be cleaned 3. Need to replace a new filter 4. The connection of tubes , or
the 2-in-1 crevice tool or other accessories with handheld vacuum cleaner are not installed in place 5. The suction nozzle is blocked and the pipe is blocked 6. The battery power is low.
1. The brush roller is stuck or entangled by the hairs or strings, and the machine stop automatically and is protected
2. The installation method of the roller brush is incorrect
3. The motor runs, but the roller brush does not rotate
4. The connection among the long connecting tube and the LED floor brush with the main unit is not installed in place
1. Filter is not installed 2. The installation position of the
filter is incorrect 3. The filter is damaged and
needs to be replaced
1. Battery pack is running out of power
2. Clogging of the suction nozzle and blockage in the pipe cause the overheating of the main unit
3. Filter blockage

SOLUTiON
1. Charge the battery accordingly to he instructions
2. Make sure that the charger matches the model you are using
Take out the dust cup and clean up the garbage or blockage
1. Clean the dust cup 2. Clean the filter according
to the instructions on the manual 3. Contact customer service to purchase a replacement filter 4. Follow the instructions to reinstall 5. Clean the nozzle and tube 6. Charge the battery according to the instructions;
1. Clean the LED floor brush according to the instructions, and then restart the vacuum cleaner;
2. Reinstall the roller brush according to the instructions on the user manual
3. If the conveyor belt is broken, contact the after-sales maintenance center for repair
4. Reinstall the long connecting tube, the LED floor brush and the main unit according to the instructions
1. Check whether the filter has been installed correctly according to the instructions
2. Install the filter correctly according to the instructions
3. Contact customer service to purchase a replacement filter
1. Charge the battery as instructed
2. Clean the suction port and tube and cool the main unit to normal temperature and restart
3. Clean the filter, dust cup, filter cover according to the instructions

11

PRODuCT sPECIFICaTIONs

Model no.: Voltage: Output power:
Charging time: Two Speed of run time: Product Dimension (mm): Stick Vac with LED floor brush:

GVC150RD DC 22.2V 150W Main unit 15W LED floor brush 12W Motorized bed brush Approx. 4 – 5 hours About 17 mins (High) / 30 mins (Low)
1060(H) x 235(W) x 160(D) mm

*The final product specification may be varied according to a different lot of material and actual input voltage power of the usage area.

12

–
– , – – – 08 – 8
– – – – – – – – –
–
– – – – – – –
–
13

–
– – – – (“”) – – – – – /
– – – – – – – – – –
14

17

1. 2. 3. / 4. 5. 6. 7. LED 8. 9.

10. 11. 12. 13. 14. 21 15. 16. 17.
15

4 – 5
–
–

” ” (–)

“”

16

LED / “”LED LED LED