FISHER and PAYKEL HC36PHTX1 36 Inch Pyramid Chimney Wall Range Hood User Guide
- September 18, 2024
- FISHER and PAYKEL
Table of Contents
FISHER and PAYKEL HC36PHTX1 36 Inch Pyramid Chimney Wall Range Hood User Guide
The wall chimney range hood has a contemporary styling, extracting steam, grease and cooking odors quietly and efficiently.
- With four fan speeds, select the perfect extraction rate for your cooking
- Edge-to-edge extraction for increased performance
- Powerful 600CFM maximum airflow
DIMENSIONS
Height: 25 13/16 – 43 1/16 “
Width: 35 3/8 “
Depth: 19 11/16 “
FEATURES & BENEFITS
Quiet And Effective
Odors can linger in the kitchen well after cooking is finished. This vent hood
offers four fan speeds for powerful extraction to ensure steam and smells are
quickly removed.
Easy Installation
This wall chimney vent hood is the perfect partner to your Fisher & Paykel
cooktop. It can be either externally ducted or internally recirculated, making
it perfect for apartments.
Simple To Clean
Three filters effectively trap grease particles during extraction. They are
easy to remove and dishwasher safe, or can be cleaned by hand in hot soapy
water.
Complementary Design
This wall chimney ventilation hood’s sleek stainless steel finish will
complement any contemporary kitchen and is designed to match the rest of
Fisher & Paykel’s kitchen appliance family.
SPECIFICATIONS
Fan ratings
Maximum sound rating: 67 dBA
Installation and cleaning
Air outlet size: 6 “
Dishwasher safe filters: 3
Stainless steel filter cover: •
Two piece height adjustable flue: •
Performance
Extraction type: Surface
Fan speeds: 4
Filter type: Mesh
Power Requirements
Supply voltage: 120 V
Product Dimensions
Depth: 19 11/16 “
Height: 25 13/16 – 43 1/16 “
Width: 35 3/8 “
Product information
Control type: Soft-touch
Ventilation features
Light type: LED
Timer function: •
SKU: 50131
The product dimensions and specifications in this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. © Fisher & Paykel Appliances Ltd 2020
Other product downloads available atfisherpaykel.com
⬇️2D-DWG Wall Range
Hood
⬇️2D-DXF Wall Range
Hood
⬇️Archicad Wall
RangeHood
⬇️Data Sheet Wall Range
Hood
⬇️Service &
Warranty
⬇️Revit Wall RangeHood
⬇️Rhino Wall
RangeHood
⬇️Sketchup Wall
RangeHood
Where applicable:
All appliances use energy, and energy usage typically generates carbon emissions. Fisher & Paykel Appliances’ In-use Energy Carbon Emissions Estimate indicates carbon emissions from a product’s in-use energy. This is calculated either annually or per cycle, using the product’s market-specific energy label energy consumption data multiplied by the carbon emissions factor for energy in your country or region.
Our In-use Energy Carbon Emissions Estimate is designed to assist customers in making informed purchasing decisions when comparing different Fisher & Paykel products. For example, a heat pump dryer typically has a lower In-use Energy Carbon Emissions Estimate than a vented dryer.
A PEACE OF MIND SALE
24 Hours 7 Days a Week Customer Support
T 1.888.936.7872 W
www.fisherpaykel.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>