BlumSafe 2.0 New Keypad User Guide
- September 18, 2024
- BLUMSAFE
Table of Contents
2.0 New Keypad
“`html
Product Specifications
- Model: BlumSafe New Keypad 2.0
- Supported Entry Methods: Code, Fingerprint, RFID Card
- Fingerprint Capacity: 30 pieces
- RFID Card Capacity: 100 pieces
Product Usage Instructions
1. Closing the Door
To close the door, press # on the keypad.
2. Programming
Follow the steps below to set up fingerprints and IC cards:
-
Press any touch key to wake up the display.
-
Press the red coding switch without listening to the
sound. -
The system will prompt you with different sounds and LCD
messages for various actions like setting fingerprint, adding IC
card, changing password, deleting fingerprints, deleting IC cards,
and resetting password. -
Follow the prompts on the display to complete the desired
action.
Low Voltage Prompt
When opening the door, a Low Battery meter low voltage prompt
will appear if the battery is running low.
Mute Settings
To mute the system, press **. To turn on sound, press
**.
FAQ
Q: How do I add a new fingerprint or IC card?
A: To add a new fingerprint or IC card, follow the programming
instructions provided in the manual.
Q: What should I do if I forget my password?
A: You can reset the password to the factory default (1234) by
following the reset procedure in the manual.
Q: How can I check the battery level?
A: The system will display a low voltage prompt when the battery
is running low.
“`
BlumSafe New Keypad 2.0 (Code, Fingerprint, RFID Card) Operating Instructions
Operation 1, User password: 1234; Manager password: No; The fingerprint library is empty, and any fingerprint can open the electronic lock. But after registering the fingerprint, only the registered fingerprint can be used to open the electronic lock. 1.1, Fingerprint: open the door Place your finger on the fingerprint window without moving. If the fingerprint comparison is successful, the unlock icon will be displayed and the lock will be opened. If the fingerprint comparison fails, the unlock failure icon is displayed. 1.2, Password: open the door Press any touch key, wake up the display, enter the password, and then press the “#” key. If the password is correct, the unlock icon is displayed and the lock is opened. If the password is incorrect, the unlock failure icon is displayed. 1.3, IC card: open the door Press any touch button to wake up the display, swipe the card, and if the IC card comparison is successful, the unlock icon will be displayed and the lock will be opened. If the IC card is incorrect, display the unlock failure icon
2, Close the door: press `#’ to close the door.
Programming
3, How to set fingerprint and IC card
Fingerprint group: 30pcs
IC cards: 100pcs
Press any touch key to wake up the display, and then press the red coding switch without
listening to the sound as follows:
1. The buzzer sounds once and prompts as follows. You can release your hand and register and
change your password according to the display:
Sounds
LCD
Short press to set and
release with one
1-EnrollFinger
Set fingerprint
sound
2-EnrollCard
Add IC card
3-ChangeCode
Change password
2. The buzzer sounds twice and prompts as follows. You can release it and delete and reset the
password according to the display:
Sounds
LCD
Long press and hold the setting button until it 1-DelFingerprint rings 2 times to release
Delete all fingerprint
2-DelCard
Delete all LC card
3-ResetCode
Restore factory password 1234
3. The buzzer will sound for a long time and prompt as follows, which can be released. The system will set the factory value, clear all fingerprints, clear the IC, and reset the password to 1234 4 Low voltage prompt When opening the door, a “Low Battery” meter low voltage prompt will appear.
Mute settings: press Turn on sound: press
Videos for Programming: