Midea MSAF421DWW Blade Less Tower Fan User Manual
- September 18, 2024
- Midea
Table of Contents
MSAF421DWW Blade Less Tower Fan
“`html
Specifications
- Product Model: MSAF421DWW
- Working Voltage: 24V
- Rated Current: 1.2A
- Noise: 61dB
Product Overview
Parts List
- Top cover
- Air outlet
- Adapter
- Air inlet grille x2
- Display and Control panel Center piece
- Base Parts List:
- Pre-filter x2
- HEPA filter x2
- Adapter x1
Product Installation
Installation Procedures
- Remove the air inlet grille.
Operation Instructions
App Setup and Operation
Cleaning and Maintenance
User Servicing Instructions
Troubleshooting
FAQ
Q: Can I wash the HEPA filter?
A: No, the HEPA filter should not be washed. It is recommended to replace it according to the manufacturer’s instructions.
“`
2 IN 1 FAN WITH TRUE HEPA FILTER
USER MANUAL
MSA F4 21DW W
Dow nload t he app & act ivat e product
Warning notices: Before using this product, please read this manual carefully
and keep it for future reference. The design and specifications are subject to
change without prior notice for product improvement. Consult with your dealer
or manufacturer for details. The diagram above is just for reference. Please
take the appearance of the actual product as the standard.
THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance offers in a safe way.
CONTENTS
THANK YOU LETTER
01
SAFETY INSTRUCTIONS
02
SPECIFICATIONS
06
PRODUCT OVERVIEW
07
PRODUCT INSTALLATION
08
OPERATION INSTRUCTIONS
10
APP SETUP AND OPERATION
12
CLEANING AND MAINTENANCE
13
USER SERVICING INSTRUCTIONS
15
TROUBLESHOOTING
16
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT 1 7
DATA PROTECTION NOTICE
18
01
SAFETY INSTRUCTIONS
Intended Use
The following safety guidelines are intended to prevent unforeseen risks or damage from
unsafe or incorrect operation of the appliance. Please check the packaging and appliance
on arrival to make sure everything is intact to ensure safe operation. If y
ny
damage, please contact the retailer or dealer. Please not
ations or alterations to
the appliance are not allowed for your safety concern. Unintended use may cause
hazards and loss of warranty claims.
Explanation of Symbols
Danger This symbol indicates that there are dangers to the life and health of
Warning of electrical voltage This symbol indicates that there is a danger to
life and health of persons due to voltage.
Warning The signal word indicates a hazard with a medium level of risk which,
if not avoided, may result in death or serious injury.
Caution The signal word indicates a hazard with a low degree of risk which, if
not avoided, may result in minor or moderate injury.
Attention The signal word indicates important information (e.g. damage to
property), but not danger.
Observe instructions This symbol indicates that a service technician should
only operate and maintain this appliance in accordance with the operating
instructions.
Read these operating instructions carefully and attentively before
using/commissioning the unit and keep them in the immediate vicinity of the
installation site or unit for later use!
02
CAUTION
° Read rules for safe operation and instructions carefully. ° This appliance
is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play with the
appliance. ° Never insert fingers, pencils, or any other object through the
grille when fan is running. ° Disconnect fan when moving from one location to
another. ° Be sure fan is on a stable surface when operating to avoid
overturning. ° Keep electrical appliances out of reach from children or infirm
persons. Do not let them use the appliances without supervision. ° Household
use only.
WARNING
° If the supply cord is damaged, it must be replaced by manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
° To protect against the risk of electrical shock, do not immerse the unit,
cord or plug in water or other liquid.
° When the appliance is not in use and before cleaning, unplug the appliance
from the outlet.
° When the fan was assembled, the rotor blade guard shall not be taken off
anymore.
° Ensure that the fan is switched off from the supply mains before removing
the guard.
° The appliance is only to be used with the power supply unit provided with
the appliance.
03
° This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way.
° If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
° WARNING–To reduce the risk of fire or electric shock, do not use this fan
with any solid-state speed control device.
° This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows,unplug the product from
the outlet. Replace the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short-circuit may be present and the product should
be discarded or returned to an authorized service facility for examination
and/or repair. a) “Do not operate any fan with a damaged cord or plug. Discard
fan or return to an authorized service facility for examination and/or
repair.” b) “Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not be
tripped over.”
° Do not leave the fan running unattended ° This product complies with the
maximum allowable
concentration of ozone of 0.050 parts per million by volume (ppmv) in a 24-h
period.
04
° This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
° NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
° Please note that any changes or modifications of this product not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
° If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: –Reorient or relocate the receiving antenna. –Increase the
separation between the equipment and receiver. –Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help. Midea
America Corp. Parsippany, NJ 07054 TEL :
1-866-646-4332
05
SPECIFICATIONS
Product Model Working Voltage Rated Current Noise
MSAF421DWW 24V 1.2A 61dB
Parts Input Output
Adapter
100-240V~ 50/60Hz 1.5A
24V
1.5A
06
PRODUCT OVERVIEW
Part Name
Top cover
Air outlet
Adapter
Air inlet grille x2
Display and Control panel Center piece
Base Parts List
Pre-filter x2 HEPA filter x2
Remote Controller × 1
Manual × 1
Warranty card × 1
Adapter x 1
NOTE All the pictures in this manual are for explanation purpose only. Any
discrepancy between the real object and the illustration in the drawing shall
be subject to the real subject.
07
PRODUCT INSTALLATION
Installation Procedures
1 Remove the air inlet grille.
2 part on both sides to pull it outwards, and
Buckle 3
4
It is recommended
cleaning and replacement cycle can beadjusted according to the use environment).
5
align the slot
position at the bottom, and buckle up
the upper U-shaped buckle.
6 Install the air inlet grillealign the upper two buckles and press them tightly, then press the two sides at lower part, slowly and gently buckle the air inlet grille.
Buckling position
08
7 Install the adapter,Tighten the plug with the socket position of the base.
8 Plug power supply.
09
OPERATION INSTRUCTIONS
Control Panel Operations
Function description ° Startup/Standby, long press the on button, ” ”
indicator lights up. ° Touch this button to switch the wind mode among normal,
plasmacluster,
° Touch this button to start/stop the swing. ° Touch this button to switch the
wind speed (cycles among level
1-2-3-···-10-1-2). ° Schedule to shut down in the power-on state, and schedule
to start up in
the standby state. ° Touch this button to set the timer (the display cycles
among
0-1-2-···-12-0h); 0h means that the timer is canceled. ° Filter replacement
reminder icon; when the icon ” ”
needs to be replaced. ° In AI smart wind mode, the indicator light ” ” is on,
and the wind power
is automatically adjusted according to changes in ambient temperature. ° This
indicator light is on in sleep wind mode.Start the sleep wind function,
and the fan automatically adjusts the level according to the program; there
are three levels: 1, 2 and 3; you can adjust the level of the sleep wind by
pressing the wind speed button. ° Displays the wind speed level or set timer,
and displays the temperature in the wind mode. ° This indicator light is on in
ion wind mode. ° In this mode, plasmacluster is turned on, and level 1~10 wind
has plasmacluster. ° This indicator light is ” “.Long press the switch button
for 3 seconds to start matching or disconnect ” “. ° The lights are on, ” ” is
connected. ° The lights are blinking and the ” ” is disconnected or being
connected.
10
Remote Control
° The remote control should be normally used within 5 meters of the front of
the product and 30 degrees of the deviation angle.
° The battery contains many heavy metals, acids and bases, etc., which may
threaten human’s health. Waste batteries should be recycled separately.
Start up or shut down oscillating
Press “+, -” to set the winds peed or timing time
Startup/Standby Switch the wind type
Set the timed shutdown /reserved startup
AAA Battery. 1.5V
Battery NOTE Use manganese or alkaline batteries of type “AAA”. DO NOT use
rechargeable batteries.
Additional Functions
° Forced shutdown There is no operation during the running of the fan, after
15 hours of continuous operation, the fan will be forced to shut down auto-
matically.
° Intelligent memory
°
In case of no operation for 30 seconds during normal operation, the indicator
light on
to restore display.
11
APP SETUP AND OPERATION
Download the SmartHome app
On an app market (Google Play Store, Apple App Store), search for SmartHome
and find the SmartHome app. Download and install it on your phone. You can
also download the app by scanning the QR code below.
Register and log in
Open the SmartHome app, and create a new account to start (you can also
register through a third-party account). If you already have an existing
account, use the account to log in.
Download the app & activate product
Connect your devices to SmartHome
Make sure your mobile phone is connected to your home’s wireless network. If
it is not, go to Settings and enable wireless networks and Bluetooth.
If a message of “Smart devices discovered nearby” appears, tap to add.
Please power on your devices.
Open SmartHome app on your phone.
If no message appears, select “+” on the page and select your device in the
list of nearby devices available. If your device is not listed, please add
your device manually by the device category and device model.
Washing machine
Connect your device to the wireless network according to instructions in the
app. If the connection fails, please follow the instructions provided by the
app to continue with the operation.
NOTE
· Make sure your devices are powered on. · Keep your mobile phone close enough
to your device when you are connecting your device to the network. · Connect
your mobile phone to the wireless network at home, and make sure you know the
password of the
wireless network. · Check if your wireless router supports 2.4 GHz band and
turn it on. If you are not sure whether the router
supports 2.4 GHz band, please contact the router manufacturer. · The device
cannot connect to the wireless networks that requires authentication. These
networks usually appear
in public areas such as hotels, restaurants, etc. Please connect to a wireless
network that does not require authentication. · Turn off the WLAN+ (Android)
or WLAN Assistant (iOS) function of your mobile phone when connecting your
device to the network. · If your device was connected to a wireless network
before but needs to reconnect, please tap “+” on the app Home page, and add
your device again by the device category and model according to the
instructions in the app.
12
CLEANING AND MAINTENANCE
The fan requires minimal maintenance. Do not try to fix it by yourself. Refer
it to qualified service personnel if service is needed.
1. Before cleaning and assembling, unplug the fan power. 2. To ensure
adequate air circulation to the motor, keep vents at the rear of the motor
free
of dust. Do not disassemble the fan to remove dust. Please wipe the exterior
parts with a soft cloth soaking a mild detergent. 3. Do not use any abrasive
detergent or solvents to avoid scratching the surface. 4. Do not use any of
the following as a cleaner: gasoline, thinner. 5. Do not allow water or any
other liquid entering into the motor housing or interior parts. 6. Be sure to
unplug from the electrical supply source before cleaning. 7. Plastic parts
should be cleaned with a soft cloth moisten with mild soap Thoroughly remove
soapsuds with dry cloth.
Pre-filter Cleaning
1 Unplug the power cord.
2
3 Remove the dust with vacuum cleaner. 4 Install the machine in reverse order
and plug power supply.
13
Filter Replacement
1 Filter model: FQ150CJ-2 (including 2 sets).
2 When the indicator light for replacement
is not replaced in time, the prompt will appear during each startup.
3
4 Long press the mode button for 3
14
USER SERVICING INSTRUCTIONS
a)Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
b)Open fuse cover. Slide open fuse access cover on top of attachment plug
towards blades.(Fig. 1 )
c)Remove fuse carefully. Insert the tip of your tool into fuse slot(close with
the terminal), then pry the fuse gradually and slowly, but not overexert. If
you feel tight, you can try it at several times and pry the fuse little by
little. When one side of the fuse has been pried, then you can get the fuse
out entirely.(Fig. 2 )
d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.(Fig. 3 )
e)Close fuse cover. Slide close the fuse access cover on top of attachment
plug.(Fig. 4 ) f )Risk of fire. Do not replace attachment plug. Contains a
safety device(fuse)that should
not be removed. Discard product if the attachment plug is damaged. g)When the
fan suddenly does not work during normal operation, please check whether
it is a problem with the fuse.
1
2
3
4
NOTE
· When you replace the fuse, please don’t operate suddenly or overexert, or
else the product will be damaged or cause accident.
· When you feel it hard to be operated, please make sure you have got the
right way.
15
TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. It is recommended to read the table below carefully in order to save your time and money that may cost for calling to the service center.
Problem
Cause
Solution
The machine does not work properly after installed
° The power cable is not
Make sure the plug is properly
plugged in or has poor contact. inserted into the socket.
° The switch on the body is not turned on.
Turn on the switch on the body.
The remote does not work
° The battery needs replacing. Replace the battery.
° The remote is being used more Use the remote closer to the
than 5m away from the fan.
fan and make sure it is pointing
directly at the display panel.
16
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT
logo, word marks, trade name, trade dress and all versions there of are
valuable assets of Midea Group and/or its affiliates (“Midea”), to which Midea
owns trademarks, copyrights and other intellectual property rights, and all
goodwill derived from using any part of an Midea trademark. Use of Midea
trademark for commercial purposes without the prior written consent of Midea
may constitute trademark infringement or unfair competition in violation of
relevant laws. This manual is created by Midea and Midea reserves all
copyrights thereof. No entity or individual may use, duplicate, modify,
distribute in whole or in part this manual, or bundle or sell with other
products without the prior written consent of Midea. All the described
functions and instructions were up to date at the time of printing this
manual. However, the actual product may vary due to improved functions and
designs.
17
DATA PROTECTION NOTICE
For the provision of the services agreed with the customer, we agree to comply
without restriction with all stipulations of applicable data protection law,
in line with agreed countries within which services to the customer will be
delivered, as well as, where applicable, the EU General Data Protection
Regulation (GDPR). Generally, our data processing is to fulfil our obligation
under contract with you and for product safety reasons, to safeguard your
rights in connection with warranty and product registration questions. In some
cases, but only if appropriate data protection is ensured, personal data might
be transferred to recipients located outside of the European Economic Area.
Further information are provided on request. You can contact our Data
Protection Officer via Mid eaDPO@m id ea.co m . To exercise your rights such
as right to object your personal date being processed for direct marketing
purposes, please contact us via Mid eaDPO@m id ea.co m . To find further
information, please follow the QR Code.
18