Soundcore X10 Teamplush Earbuds User Manual

: September 16, 2024
: Soundcore

Table of Contents

X10 Teamplush Earbuds
Product Information
Specifications
Product Usage Instructions
Frequently Asked Questions (FAQ)

X10 Teamplush Earbuds

Product Information

Specifications

Input Rated output power: 5 V 0.5 A
Battery capacity: 55 mAh x 2 (earbuds); 540 mAh (charging
case)
Charging time: 2 hours
Playtime: Up to 8 hours (Total 32 hours with the charging case,
varies by volume level and content)
Driver size: 10 mm x 2
Frequency response: 20 Hz – 20 kHz
Impedance: 32 ohms
Waterproof level: IPX7 (earbuds)
Bluetooth version: 5.2
Bluetooth range: 10 m / 33 ft

Product Usage Instructions

Charging

Place the earbuds in the charging case and close it.
Connect the charging case to the power supply using a USB-C
charging cable. The LED indicator on the charging case will show
the charging status.

Wearing

Choose the Ear Tips (XS, S, M, L, XL) that fit your ears
best.
Insert the earbuds into the inner canal of your ears and turn
gently until you find the most comfortable and secure
position.

Powering On/Off

To power on, switch the button to ON. To power off, switch the
button to OFF.

Bluetooth Pairing

For pairing, press and hold the button for 3 seconds until
connected.

Controls

Refer to the user manual for detailed controls in Stereo Mode
and Mono Mode.

Soundcore App

Download the Soundcore App to customize settings, adjust volume,
control playback, activate voice assistants, switch ANC modes,
update firmware, and more.

Reset

Place the earbuds in the charging case and leave the case
open.
Press and hold the button on the charging case for 10 seconds
until the LED indicators flash white 3 times and then in sequence
to confirm the reset.

Frequently Asked Questions (FAQ)

Q: How do I know if my earbuds are fully charged?

A: The LED indicator on the charging case will show a solid
light when the earbuds are fully charged.

Q: Can I use one earbud at a time?

A: Yes, you can use either earbud independently in Mono Mode for
calls or music playback.

Soundcore Sport X10
USER MANUAL

Charging

· Fully dry off the earbuds and the USB port before charging. · Use a certified USB-C charging cable and charger to prevent any damage.
· Fully charge both the earbuds and the charging case before the first use.
1. Place the earbuds in the charging case and close it.
2. Connect the charging case to the power supply by using a USB-C charging cable. The LED indicator on the charging case indicates the charging status.

1

2

3

Wearing

1. Choose the Ear Tips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.

1

2

3

XS S M L XL
· Your earbuds come with 5 pairs of Ear Tips, among which Medium-sized are pre-installed. 01 EN

Powering On/Off
· Open the charging case, the earbuds will automatically power on. · To power off, place the earbuds into the charging case and close it.
ON
OFF
· The earbuds will automatically power off after 10 minutes if no device is connected.
· To manually power on, press and hold the multi-function button on both earbuds for 3 seconds.
Bluetooth Pairing
1. Open the charging case, and press the button on the charging case for 3 seconds to enter Bluetooth pairing mode. · The 3 LED indicators on the charging case will flash white in sequence continuously.
2. Select “Soundcore Sport X10” on your device’s Bluetooth list to connect. · When successfully connected, the 3 LED indicators will turn white for 3 seconds and then turn off.
02 EN

Soundcore Sport X10

PAIRING

3s

CONNECTED

3s

· Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
· Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
· Mono mode: When Bluetooth connected, you can use either one of the earbuds only by placing the other one into the charging case.
· When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
· When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.

Controls
Stereo Mode

Play/Pause Next track Volume up Volume down ANC

Press twice (R) Press twice (L) Press once (R) Press once (L) Press and hold for 2 seconds(R/L)

03 EN

Answer a call End a call/Reject a call
Mono Mode Play/Pause Answer a call End a call/Reject a call Activate Siri or other voice assistant software

Press once(R/L) Press and hold for 2 seconds(R/L)
Press twice Press once Press and hold for 2 seconds

Soundcore App
Download the Soundcore App to customize the user interface (e.g. adjust volume, control playback, activate Siri), adjust EQ, switch ANC modes, update firmware, and explore more.

Reset
· You might need to reset the earbuds if you experience any connectivity problems or function issues. 04 EN

1. Place the earbuds in the charging case and leave the case open. 2. Press and hold the button on the charging case for 10 seconds until the LED
indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.
1

2
×3 10s

Specifications

Specifications are subject to change without notice.

Input Rated output power
Battery capacity
Charging time Playtime (varies by volume level and content) Driver size Frequency response Impedance Waterproof level Bluetooth version Bluetooth range

5 V 0.5 A 5 mW (@1% THD) 55 mAh x 2 (earbuds); 540 mAh (charging case) 2 hours Up to 8 hours (Total 32 hours with the charging case) 10 mm x 2 20 Hz – 20 kHz 32 IPX7(earbuds) 5.2 10 m / 33 ft
05 EN