Jantex FS401 Green RTU Biological Washroom Cleaner User Guide
- September 15, 2024
- Jantex
Table of Contents
Jantex FS401 Green RTU Biological Washroom Cleaner
Product Specifications:
- Product Name: FS401 – Jantex Green RTU Biological Washroom Cleaner
- Volume: 750ml
- Physical state: Liquid
- Colour: Green
- Odour: Lemon
- pH: 2 – 4
- Density: 0.99 – 1.02
Product Usage Instructions
For Odour-Free Washroom:
Spray or swab the cleaner onto the contaminated surface, work it well into
the soiling with a clean, damp cloth or mop. Leave for 2 – 3 minutes before
wiping away any excess product. Do not rinse but allow to dry slowly. Repeat
regularly until the problem is eradicated.
Maintenance:
To maintain an odour-free washroom, spray and wipe soiled and contaminated
areas regularly with the cleaner.
Sink and Waste Outlets:
Pour a little cleaner directly into sink or urinal outlets during quiet
periods or at night to eliminate scale, odours, and blockages.
Safe Handling:
Ensure correct PPE is worn when handling chemicals. Refer to the product
Safety Data Sheet for first aid measures and helpline in case of an accident.
FAQ:
-
Q: Is dilution required for this product?
A: No, this product is ready-to-use, so no dilution is required. -
Q: How should I handle accidents involving the product?
A: Refer to the Safety Data Sheet for immediate first aid measures and contact the helpline in case of a medical emergency.
FS401 – Jantex Green RTU Biological Washroom Cleaner – 750ml
READY TO USE
- Removes organic staining and odors in order to maintain a clean, odor-free washroom environment.
- Biotechnology-based formula designed to target the causes
- of odors, including uric acid and control scale.
- Ideal for all washroom surfaces, including floors and walls.
Directions for Use
For an odour free washroom:
- Spray or swab BT4 onto the contaminated surface making sure you work it well into the soiling with a clean, damp cloth or mop. Leave BT4 to work for 2 – 3 minutes before wiping away any excess product.
- Do not rinse but allow to dry slowly. Repeat regularly until problem has been eradicated.
- To maintain an odour free washroom, spray and wipe soiled and contaminated areas regularly with BT4.
For sink and waste outlets:
Pour a little directly into sink or urinal outlets during quiet periods or at
night, to eliminate scale, odours and blockages.
Physical and Chemical Properties
- Physical state: Liquid Colour: Green Odour: Lemon
- pH: 2 – 4
- Density: 0.99 – 1.02
Additional Dilution Recommendation
Ready-to-use formula, no dilution required.
Safe Handling
- Ensure the correct PPE is worn at all times when handling, dispensing or using chemicals. All PPE should comply with appropriate standards and be readily available for use.
- In case of an accident please refer to the product Safety Data Sheet (SDS) for immediate first aid measures and helpline telephone number for a medical emergency.
- Nisbets Plc, Fourth Way, Avonmouth, Bristol BS11 8TB Tel: 0845 1405555 | Email: sales@nisbets.co.uk