Akko JIN01 Aluminum Mechanical Keyboard User Manual
- September 15, 2024
- AKKO
Table of Contents
Akko JIN01 Aluminum Mechanical Keyboard
Packing List
Minimum System Requirement
Windows”XP / Vista I 7 I 8 I 10 or higher version
Connectivity Method
Connect the keyboard to your computer by plugging in the USB cable into an
available USB-A port to start using it.
LED Indicator Overview
JIN01 HotKeys
JIN01 System Commands (Windows)
Lock Windows Key
Press Fn and left Win Key
Restore Factory Settings
Hold down Fn and press Backspace Key for 5S
Revert Ctrl into Menu Key
Hold down Fn and press right Crl for 3S
JIN01 System Commands (Mac)
JIN01 Backlight Settings
Connection Guide
Bluetooth Pairing
After turning on the keyboard, press Fn+E/R/T to enter Bluetooth mode. Press
and hold the Fn +E/R/T Key combination for 3 seconds to enter pairing mode,
with the blue indicator light flashing quickly. Once the connection is
established, the indicator light will stay on for 2 seconds. If the device
fails to connect, the indicator light will turn off and the keyboard will
enter sleep mode.
2.4G Pairing
After turning on the keyboard, press Fn+ Y to enter 2.4G mode. Then press and
hold the Fn+ Y Key combination for 3 seconds to enter pairing mode. Then
insert in the receiver, and the green indicator light will flash quickly. Once
the pairing is successful, the LED indicator will stay on for 2 seconds.lf no
available device is found within 30 seconds, the LED indiactor will turn off
and the keyboard will enter sleep mode.
Battery Level Check
Press the Fn + Space Key combination to check the battery level while in
wireless mode. If the battery level is below 30%, the LED for number keys 1-2
will turn red. If it’s between 30-100%, the LED for number keys 1-9 will show
a green light. And when the battery is fully charged, the LED for number keys
1-0 will show a green light.
Key/Lighting Effects Customization Instruction
- The driver can be connected and lighting and key can be customized under the three working modes of the keyboard.
- The three working modes of the keyboard can be matched to drive the music rhythm.
- Please download the Akko Cloud driver on our website.
- Users can download the driver via en.akkogear.com
Akko Warranty and Service Statement
- The keys can be remapped and RGB can be programmed in the driver in any of the connection mode
- Keyboard lighting can be coordinated with the driver to achieve audio visualizer
- Defects resulting from disassembly of our product, improper usage and incorrect installation are not covered by warranty.
- The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.
Company : Shenzhen Yinchen Technology Co., Ltd
Address : 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an
District, Shenzhen, China
Tel : 0755-23216420
Website : www.akkogear.com
Origin : Shenzhen, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>